Netgear xavb5201 v2 - Manuals

8 Secure Your Network ¾ To create a secure network: 1. Plug in your new adapters.2. Wait until the Pick A Plug LEDs are blinking.3. Press the Security button for two seconds, then press the Security button on one of the other adapters in your existing network for two seconds. Both buttons must be pr...

9 Add Adapters To add adapters before you have configured the security feature, just plug them in and connect the adapters to your equipment. ¾ To add adapters to a Powerline network with security set: 1. Plug in and connect the new adapters.2. On all of the previously installed adapters, press and ...

10 Troubleshooting Tips Power LED is off. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power LED is blinking amber. Power saving mode occurs when the Ethernet LED is off. This can oc...

July 2014 Netgear, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA 201-18267-02 Technical Support Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com . Yo...