Netgear PS110 - Manuals - manualsarea.com

Page 2 - Customer Support

START HERE Instructions in this guide are for users with the following: • Microsoft ® Windows ® 95, Windows ® 98, Windows ® 2000, or Windows NT ® • A network card installed with the NetBEUI protocol All other users must refer to Installation and Reference for theModel PS104/PS105/PS110/PS113 Printer...

Page 3 - PRODUCT ILLUSTRATION; LEDs; Label; PRINTER LEDs; Front Panel of the Model PS104 Print Server

PRODUCT ILLUSTRATION LEDs The following table describes the activity of the LEDs on the PS100Series print servers. Label Color Activity Description PWR Green On Power is supplied to the (power) print server. PRINTER, PRINTER 1, PRINTER 2, or PRINTER 3 Link/Act Green On A printer is connected to the ...

Page 4 - TYPICAL APPLICATIONS; Rear Panel; BNC; Key

Normal/Uplink Push Button (Model PS104 and Model PS105 Only) The Normal/Uplink push button on the Model PS104 and ModelPS105 print servers allows you to select Normal (MDI-X for connecting to a PC) or Uplink (MDI for connecting to a hub orswitch) wiring for the first 10BASE-T port, eliminating the n...

Page 5 - Install the FirstGear for Print Server: Windows User; Model PS105 Print Server

INSTALL THE PRINT SERVER You can place the print server on a desktop or any flat surface.To save work space, you can also mount the print server with Velcrostrips on the side of a printer. CONNECT THE PRINTER CABLES Connect a cable (not provided) from the printer to the parallelPRINTER port on the p...

Page 6 - Setting Up Your PC to Recognize the Print Server; Click on “No” when asked if there is an Epson Stylus COLOR; Windows NT Users

4. Click on “Next” when the FirstGear window opens. 5. Choose “User PC Installation,” and click on “Next.” Note: NETGEAR strongly recommends that you exit all Windows programs before running the Setup program. 6. Click on “Next” when the “NETGEAR Print Server Software Installation” window opens. 7. ...

Page 7 - TROUBLESHOOTING; Problem

TROUBLESHOOTING Problem When using the FirstGear Setup Program to browse the network from the network administrator’s PC, the print server cannot be seen. The print server is not listed when you run the FirstGear For Print Server Setup program. You do not know what network protocolsare installed on ...

Page 8 - REPLACEMENT POWER ADAPTER; Order Code; TECHNICAL SPECIFICATIONS; General Specifications

REPLACEMENT POWER ADAPTER Order Code PS104 PWR-002-004 Power adapter (12 V DC, 1.2 A), linear,North America PWR-002-010 Power adapter (12 V DC, 1.2 A) linear, Australia PWR-002-006 Power adapter (12 V DC, 1.2 A) linear,General Europe PWR-002-005 Power adapter (12 V DC, 1.2 A), linear, Japan PWR-002-...

Page 9 - Declaration of Conformity; Reorient or relocate the receiving antenna.

NETGEAR, Inc. 4401 Great America Parkway Santa Clara, CA 95054 USA Phone: 888-NETGEAR http://WWW.NETGEAR.com ©2000 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR ™ is a trademark of NETGEAR Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. All othe...

Page 10 - N E T G E A R; Support Information; Go to

™ N E T G E A R *M-PS100NA-2* * M - P S 1 0 0 N A - 2 * NETGEAR, Inc.4401 Great America ParkwaySanta Clara, CA 95054 USAPhone: 1-888-NETGEARwww.NETGEAR.com Support Information Phone: Australia: 1800-142-046 Austria: 00800-06384327 France: 0800-90-2078 Germany: 00800-06384327 Japan: 0120-66-5402 Holl...