Netgear GSM7248R - Manuals

Netgear GSM7248R – Manual in PDF format online.

Manuals:

Manual

Manual Netgear GSM7248R

Summary

Page 2 - Technical Support; Trademarks

ii v1.0, November 2007 © 2007 by NETGEAR, Inc. All rights reserved. Technical Support Please refer to the support information card that shipped with your product. When you register your product at http://www.netgear.com/register , we can provide you with faster expert technical support and timely no...

Page 4 - Product and Publication Details

v1.0, November 2007 iv This is to certify that the NETGEAR ProSafe™ 48-Port L2 Managed Switch with Static Routing GSM7248R is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the applicatio...

Page 5 - Contents; About This Manual

v v1.0, November 2007 Contents About This Manual Conventions, Formats, and Scope ..................................................................................... i How to Use This Manual ................................................................................................... ii How t...

Page 7 - The; Typographical conventions; . This manual uses the following typographical conventions:; Formats

i v1.0, November 2007 About This Manual The NETGEAR® Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide describes how to install, configure, and troubleshoot the ProSafe™ 24-Port L2 Managed Switch with Static Routing GSM7224R and the ProSafe™ 48-Port L2 Managed Switch with St...

Page 8 - Scope; Appendix B, “Related Documents”; How to Use This Manual; Printing a page from HTML

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide ii v1.0, November 2007 • Scope . This manual is written for the Managed Layer 2 Switch according to these specifications: For more information about network, Internet, firewall, and VPN technologies, see the links to the NETG...

Page 9 - Printing from PDF; PDF of This Chapter; Printing a PDF version of the complete manual; Complete PDF Manual

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide iii v1.0, November 2007 • Printing from PDF . Your computer must have the free Adobe Acrobat Reader installed in order to view and print PDF files. The Acrobat reader is available on the Adobe website at http://www.adobe.com ...

Page 11 - GSM7224R Front Panel and LEDs; For information about the LEDs on the front panel of the switch, see

1-1 v1.0, November 2007 Chapter 1 Introduction The NETGEAR managed switch is a state-of-the-art, high-performance, IEEE-compliant network solution. It includes powerful management features that you can use to eliminate bottlenecks, boost performance, and increase productivity. This guide describes h...

Page 12 - GSM7248R Front Panel and LEDs

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide 1-2 Introduction v1.0, November 2007 GSM7224R Rear Panel The rear panel has a console port, a redundant power supply connector, and a standard AC power receptacle for the supplied power cord. GSM7248R Front Panel and LEDs The...

Page 13 - Interpreting the LEDs

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide Introduction 1-3 v1.0, November 2007 GSM7248R Rear Panel The rear panel has a console port, a redundant power supply connector, and a standard AC power receptacle for the supplied power cord. Interpreting the LEDs The followi...

Page 14 - Safety Instructions; Observe and follow service markings.

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide 1-4 Introduction v1.0, November 2007 Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. To reduce the risk of bodily injury, elect...

Page 15 - Use the product only with approved equipment.

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide Introduction 1-5 v1.0, November 2007 – The product does not operate correctly when you follow the operating instructions. • Keep your system away from radiators and heat sources. Also, do not block cooling vents. • Do not spi...

Page 16 - Always follow your local and national wiring rules.

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide 1-6 Introduction v1.0, November 2007 • To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). • Positio...

Page 17 - Package Contents

2-1 v1.0, November 2007 Chapter 2 Hardware Installation This chapter explains how to install the hardware for the ProSafe™ 24-Port L2 Managed Switch with Static Routing GSM7224R and the ProSafe™ 48-Port L2 Managed Switch with Static Routing GSM7248R. Package Contents The switch is packed and shipped...

Page 18 - Protecting Against Electrostatic Discharge; workbench pads, and an antistatic grounding strap.; Unpacking the Hardware; “Selecting a

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide 2-2 Hardware Installation v1.0, November 2007 Protecting Against Electrostatic Discharge You can also take the following steps to prevent damage from electrostatic discharge (ESD): 1. When unpacking a static-sensitive compone...

Page 19 - Installation; “Selecting a Location; Selecting a Location; Table 2-1. Site Requirements for Switch Location

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide Hardware Installation 2-3 v1.0, November 2007 Installation Install the equipment in the following sequence, as presented in this chapter: 1. Select a location. See the following section, “Selecting a Location .” 2. Install th...

Page 20 - Installing the Switch; Installing the Switch on a Flat Surface; Attach the supplied mounting brackets to the side of the switch.

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide 2-4 Hardware Installation v1.0, November 2007 Installing the Switch You can install the switch on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface The switch ships with four self-adhesive ...

Page 21 - bracket to the rack.; Checking the Installation; Before you apply power, perform the following checks:; Connecting to Power and Check the LEDs; If the POST fails, the Power LED blinks yellow.

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide Hardware Installation 2-5 v1.0, November 2007 3. Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket. 4. Align the bracket and rack holes. Use two pan-head screws with nylon washers to fasten each brac...

Page 22 - SFP Modules; SFP modules are sold separately.; Connecting a Redundant Power Supply (RPS)

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide 2-6 Hardware Installation v1.0, November 2007 SFP Modules The module bay accommodates a standard SFP module with an LC connector that is compatible with the IEEE 802.3z 1000BASE-X standard. SFP modules are sold separately. To...

Page 23 - . Select your product in the Product; Connecting Equipment to the Switch; To use a console you need the following items:

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide Hardware Installation 2-7 v1.0, November 2007 You can connect an external DC-to-DC power supply unit to the switch to provide redundant power in case the primary power supply fails. To connect a redundant power supply (RPS) u...

Page 24 - Quick Installation Guide.

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide 2-8 Hardware Installation v1.0, November 2007 To connect a console to the switch: 1. Connect the null-modem cable to the console port on the rear of the switch. 2. Connect the other end of the cable to a workstation or termin...

Page 25 - Troubleshooting Chart

3-1 v1.0, November 2007 Chapter 3 Troubleshooting Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems. Table 3-1. Troubleshooting Chart Problem Cause Solution Power LED is off. No power is received Check the power cord connections for the switch at th...

Page 26 - Additional Troubleshooting Suggestions; If the suggestions in; Network adapter cards

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide 3-2 Troubleshooting v1.0, November 2007 Additional Troubleshooting Suggestions If the suggestions in Table 3-1 do not resolve your problem, refer to the troubleshooting suggestions in this section. • Network adapter cards Mak...

Page 27 - Appendix A; Default Settings; Table A-1. Default Configuration Settings

Default Settings and Technical Specifications A-1 v1.0, November 2007 Appendix A Default Settings and Technical Specifications This appendix provides the default settings and technical specifications for the ProSafe™ 24-Port L2 Managed Switch with Static Routing GSM7224R and ProSafe™ 48-Port L2 Mana...

Page 29 - Technical Specifications

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide Default Settings and Technical Specifications A-3 v1.0, November 2007 Technical Specifications Table A-2. Technical Specifications Feature GSM7224R GSM7248R IEEE Network Protocol and standards compatibility 802.3 10BASE-T802....

Page 33 - Appendix B

Related Documents B-1 v1.0, November 2007 Appendix B Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link Windows XP and Vista Wireless Configuration Utilities http://do...