Netgear GS748TP-100NAS - Manuals

Page 2 - Technical Support; Trademarks

ii v1.0, November 2007 © 2007 by NETGEAR, Inc. All rights reserved. FullManual. Technical Support Please refer to the support information card that shipped with your product. By registering your product at http://www.netgear.com/register , we can provide you with faster expert technical support and ...

Page 3 - Voluntary Control Council for Interference (VCCI) Statement; FCC Information to User; GS700TP Smart Switch with Gigabit Ports; FCC Radio Frequency Interference Warnings & Instructions

v1.0, November 2007 iii Voluntary Control Council for Interference (VCCI) Statement This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Da...

Page 4 - Product and Publication Details

v1.0, November 2007 iv interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more o...

Page 5 - Contents; About This Guide

v v1.0, November 2007 Contents About This Guide Conventions, Formats and Scope .................................................................................... ix How to Use This Manual ................................................................................................... x How to P...

Page 7 - Congratulations on the purchase of the NETGEAR Smart Switch. The; Conventions, Formats and Scope; Typographical Conventions.; This manual uses the following typographical conventions:; personal injury or death.

ix v1.0, November 2007 About This Guide Congratulations on the purchase of the NETGEAR Smart Switch. The NETGEAR® GS700TP Installation Manual describes how to install, configure and troubleshoot the smart switch. The information in this manual is intended for readers with intermediate computer and I...

Page 8 - How to Use This Manual; Printing a Page in the HTML View; PDF of This Chapter

GS700TP Hardware Installation Guide x About This Guide v1.0, November 2007 • Scope. This manual is written for the GS700TP according to these specifications: How to Use This Manual The HTML version of this manual includes the following: • Buttons, and , for browsing forwards or backwards through the...

Page 9 - Printing the Full Manual -; Complete PDF Manual; Revision History

GS700TP Hardware Installation Guide About This Guide xi v1.0, November 2007 – Click the print icon in the upper left of the window. • Printing the Full Manual - Use the Complete PDF Manual link at the top left of any page. – Click the Complete PDF Manual link at the top left of any page in the manua...

Page 10 - Overview; Connecting to a network backbone

1-13 v1.0, November 2007 Chapter 1 Introduction The NETGEAR Smart Switch is a state-of-the-art, high-performance, IEEE-compliant network solution designed for users who require a large number of ports and want the power of Gigabit connectivity to eliminate bottlenecks, boost performance, and increas...

Page 11 - The

GS700TP Hardware Installation Guide Introduction 1-14 v1.0, November 2007 switch information, VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization. These features provide better understanding and control of the network. Initial discov...

Page 12 - Switch Features

GS700TP Hardware Installation Guide 1-15 Introduction v1.0, November 2007 Switch Features The following list identifies the key features of the NETGEAR Smart Switch. • 24/48 RJ-45 10/100/1000M auto-sensing Giga switching ports. • Small Form-factor Pluggable (SFP) GBIC slots, which function as combo ...

Page 14 - Package Contents

GS700TP Hardware Installation Guide 1-17 Introduction v1.0, November 2007 – Support 24-Port POE function, 15.4W for 12 ports , 8W for 24 ports , Total 192W for POE. GS724TP using data pairs (RJ-45 1,2,3&6 PIN) provide power to PD. • GS748TP supports the following POE functions: – Smart Power Man...

Page 15 - Rack-mount Kit for installing the switch in a 19-inch rack

GS700TP Hardware Installation Guide Introduction 1-18 v1.0, November 2007 • Rack-mount Kit for installing the switch in a 19-inch rack • Installation Guide • Smart Switch Resource CD with SmartWizard Discovery and User’s manual • Warranty/Support Information Card If any item is missing or damaged, c...

Page 16 - Step 1: Preparing the Site

2-29 v1.0, September 2007 Chapter 2 Installation This chapter describes the installation procedures for your NETGEAR Smart Switch. Switch installation involves the following steps: Step 1: Preparing the Site Step 2: Installing the Switch Step 3: Checking the Installation Step 4: Connecting Devices t...

Page 17 - Step 2: Installing the Switch; Installing the Switch on a Flat Surface; Attach the supplied mounting brackets to the side of the switch.

GS700TP Hardware Installation Guide Installation 2-30 v1.0, September 2007 Step 2: Installing the Switch The NETGEAR Smart Switch can be installed on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads. Stick ...

Page 18 - Step 3: Checking the Installation; Before applying power perform the following:

GS700TP Hardware Installation Guide 2-31 Installation v1.0, September 2007 5. Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack. Step 3: Checking the Installation Before applying power perform the following: • Inspect the equipment thoroughly. • Verify that all cable...

Page 19 - Step 4: Connecting Devices to the Switch; Connect each PC to an RJ-45 network port on the Switch front panel (; Step 5: Installing an SFP GBIC Module

GS700TP Hardware Installation Guide Installation 2-32 v1.0, September 2007 Step 4: Connecting Devices to the Switch The following procedure describes how to connect PCs to the switch’s RJ-45 ports. The NETGEAR Smart Switch contains Auto Uplink™ technology, which allows you to attach devices using ei...

Page 20 - To install an SFP GBIC module:; Step 6: Applying AC Power; Appendix A

GS700TP Hardware Installation Guide 2-33 Installation v1.0, September 2007 To install an SFP GBIC module: 1. Insert the SFP module into the SFP module bay. 2. Press firmly to ensure the module seats into the connector Step 6: Applying AC Power NETGEAR Smart Switch does not have an ON/OFF switch. The...

Page 22 - Front and Back Panel Configuration; GS724TP Front and Back Panels Configuration; illustrates the NETGEAR GS724TP Smart Switch front panel:

3-19 v1.0, November 2007 Chapter 3 Physical Description This chapter describes the NETGEAR Smart Switch hardware features. The topics include: • GS724TP Front and Back Panels Configuration • GS748TP Front and Back Panels Configuration • LED Designations • Device Hardware Interfaces Front and Back Pa...

Page 23 - GS748TP Front and Back Panels Configuration

GS700TP Hardware Installation Guide Physical Description 3-20 v1.0, November 2007 • System LEDs Figure 3-2 illustrates the NETGEAR GS724TP Smart Switch back panel: The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodatin...

Page 24 - illustrates the NETGEAR GS724TP Smart Switch back panel:; LED Designations; This section provides an explanation for the following LED types:; Port LEDs; The following table describes the port LED designations.

GS700TP Hardware Installation Guide 3-21 Physical Description v1.0, November 2007 Figure 3-4 illustrates the NETGEAR GS724TP Smart Switch back panel: The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied...

Page 25 - System LEDs; The following table describes the system LED designations.

GS700TP Hardware Installation Guide Physical Description 3-22 v1.0, November 2007 System LEDs The following table describes the system LED designations. PoE Mode • Off - No PoE-powered device (PD) connected. • Solid Green - The PoE powered device (PD) is connected and the port is supplying power suc...

Page 26 - Device Hardware Interfaces; SFP GBIC Module

GS700TP Hardware Installation Guide 3-23 Physical Description v1.0, November 2007 Device Hardware Interfaces This section provides information for the following hardware interfaces: • RJ-45 Ports • SFP GBIC Module • Factory Defaults Button RJ-45 Ports RJ-45ports are auto-sensing ports. When insertin...

Page 27 - The SFP GBIC bay accommodates a standard SFP GBIC module.; Factory Defaults Button

GS700TP Hardware Installation Guide Physical Description 3-24 v1.0, November 2007 SFP GBIC Module The GBIC module bays accommodate standard SFP GBIC modules, such as the AGM731F, AGM732F, or AGM733 from NETGEAR, allowing fiber connections on the network. The module bay is a combo port, sharing a con...

Page 28 - Troubleshooting Chart

A-1 v1.0, November 2007 Appendix A Troubleshooting This chapter provides information about troubleshooting the NETGEAR Smart Switch. The topics include the following: • Troubleshooting Chart • Additional Troubleshooting Suggestions Troubleshooting Chart The following table lists symptoms, causes, an...

Page 29 - Additional Troubleshooting Suggestions; Network Adapter Cards

Troubleshooting A-2 v1.0, November 2007 Additional Troubleshooting Suggestions If the suggestions in Troubleshooting Chart do not resolve the problem, refer to the troubleshooting suggestions in this section. Network Adapter Cards Ensure the network adapter cards installed in the PCs are functioning...

Page 31 - Network Protocol and Standards Compatibility; SNTP (Simple Network Time Protocol) 2 servers Disabled by default; Interface

B-1 v1.0, November 2007 Appendix B Technical Specifications Network Protocol and Standards Compatibility IEEE 802.3i 10Base-T IEEE 802.3u 100Base-TX,FX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3x flow control IEEE 802.3af (DTE Power via MDI) Management Windows 2000 + XP; Microsoft Exp...

Page 32 - FCC Part 15 Class A

B-2 Technical Specifications v1.0, November 2007 Mean Time Between Failure (MTBF): 165,589 hours for GS724TP, 147,558 hours for GS748TP Power Supply Power Consumption: 260W for GS724TP, 570W for GS748TP 100-240VAC/50-60 Hz universal input Physical Specifications Dimensions (H x W x D): GS724TP/GS724...

Page 33 - Modules; AGM731F 1000Base-SX SFP GBIC for multimode fiber

Technical Specifications B-3 v1.0, November 2007 UL listed (UL 1950) / CUL IEC950 / EN60950 Modules AGM731F 1000Base-SX SFP GBIC for multimode fiber AGM732F 1000Base-LX SFP GBIC for single mode fiber AGM733 1000Base-LZ GBIC for long haul single mode fiber

Page 34 - Index; Numerics

Index-1 v1.0, November 2007 Index Numerics 1000Base-LX 1-2 1000Base-SX 1-2 1000Base-T 1-2 1000Base-X 1-2 100-240VAC/50-60 2-6 100Base-TX 1-2 10Base-T 1-2 1U 1-3 8-pin 2-9 A AC Power 2-6 , 2-7 AGM731F 2-10 AGM732F 2-10 AGM733 2-10 Applying AC Power 4-17 Attaching Switch to a Rack 4-15 Auto Sensing 1-...