Netgear FS102 - Manuals - manualsarea.com

Page 2 - Start Here

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide Congratulations on your purchase of the NETGEAR ™ Model FS102, Model FS104, or Model FS108 Fast Ethernet Switch—a low-cost, high-performance network solution designed to supportpower workgroups operating at 10 megabits per ...

Page 3 - Package Contents; Wall mount

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide Verify that your package contains the following: • Model FS102, Model FS104, or Model FS108 switch • Mounting kit (for wall installation) • This installation guide • Warranty & Owner Registration Card • Support Informat...

Page 4 - Fast Ethernet Vista Ports with Built-in LEDs; Product Illustration; Front Panel of the Model FS102 switch

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide Fast Ethernet Vista Ports with Built-in LEDs All of the ports on the switch are 10/100 Mbps Ethernet ports. The network access speed for theports is automatically sensed and displayed on the front panel by the 100 Mbps LEDs...

Page 5 - LEDs; Label

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide LEDs This table describes the activity of the Model FS102/FS104/FS108 switch LEDs. Label Color Activity Description Pwr (Power) Green On Off Power is supplied to the switch.Power is disconnected. Rx/Tx/Collision Green Yello...

Page 6 - Rear Panel of the Model FS102 switch

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide Normal/Uplink Push Button The Normal/Uplink push button on the front panel of the switch allows you to select uplink (MDI)or normal (MDI-X) wiring for either of the Ethernet ports on the Model FS102 switch, port 4 onthe Mod...

Page 7 - Desktop Switching; Applications; Key

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide The Model FS102/FS104/FS108 switch is designed to provide flexibility in configuring yournetwork connections. Each switch can be used as a standalone device or can be used with 10 Mbpsor 100 Mbps hubs or other interconnecti...

Page 8 - hubs

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide Segment Switching The Model FS108 switch is used as a switch that segments a network into multiple connectedpieces, increasing overall bandwidth and throughput. The Model FS108 switch can segmentnetworks that are built with...

Page 10 - To connect the switch:; Characteristic; Prepare the Site

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide Before you begin installing your switch, prepare the installation site. Make sure your operatingenvironment meets the operating environment requirements of the equipment. To install your switch on a flat surface, you do not...

Page 11 - Verify Installation

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide 3. Set the FDX or AUTO toggle switches on the rear panel for the selected duplex mode. A hub and repeater use a common collision domain for all communications and cannotsupport full-duplex mode. When connecting any of the 1...

Page 12 - Troubleshooting Information

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide Symptom Cause Solution Green Link LED is off on an active port. Port connection is not functioning. Make sure the attached device is powered and there is a proper UTP connection at that end.Make sure the network adapter car...

Page 13 - Twisted Pair Cables; Symptom; Cable and Connector Information; twisted pair cable

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide Twisted Pair Cables For two devices to communicate, the transmitter of each device must be connected to the receiverof the other device. The crossover function is usually implemented internally as part of thecircuitry in th...

Page 15 - Technical Specifications

Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide General Specifications Model FS102 Switch Model FS104 Switch Model FS108 Switch Network Protocol and Standards Compatibility ISO/IEC 802-3 (ANSI/IEEE 802.3i) 10BASE-T Ethernet IEEE 802.3u, IEEE802.3x 100BASE-TX, Fast Ethern...