Netgear EN104TP - Manuals - manualsarea.com

Page 2 - Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide; Start Here

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Congratulations on your purchase of the NETGEAR ™ Model EN104 TP , Model EN106 TP , or Model EN108 TP Ethernet hub. The hubs deliver standards-based, plug-and-play networking solutions for small businesses, home offices, and low-density w...

Page 3 - Package Contents

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Verify that your package contains the following: • Model EN104 TP hub , Model EN106 TP hub, or Model EN108 TP hub • Mounting kit (for wall installation) • This installation guide • Warranty & Owner Registration Card • Power adapter • ...

Page 4 - Vista 10BASE-T Network Ports with Built-in LEDs; has eight; Product Illustration

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Vista 10BASE-T Network Ports with Built-in LEDs The front panel of the Model EN104 TP hub has four RJ-45 10BASE-T ports, the Model EN106 TP hub has six RJ-45 10BASE-T ports, and the Model EN108 TP hub has eight RJ-45 10BASE-T ports. Two L...

Page 5 - LEDs; The table below describes the activity of the LEDs.; Normal/Uplink Push Button; Model; hub, or port 8 on the; Rear Panel; Label

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide LEDs The table below describes the activity of the LEDs. Normal/Uplink Push Button The Normal/Uplink push button allows you to select Normal (MDI-X) wiringfor direct PC connection. The push button also allows you to select Uplink(MDI) wir...

Page 6 - e sure to choose a location that is near the devices to be; Characteristic; Installation Procedures

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Before you begin installing your hub, prepare the installation site. Make sureyour operating environment meets the operating environment requirements ofthe equipment. To install your hub on a flat surface, you do not need any special tool...

Page 7 - Ethernet specifications limit the cable length between your PC; Connect Devices to the Hub

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide You can connect PCs, Apple Macintosh computers, UNIX workstations, or anydevice equipped with a 10BASE-T Ethernet interface to the RJ-45 ports on yourhub by using twisted pair Ethernet cables. To connect any of the RJ-45 ports on your hub...

Page 8 - hub, port 6 on the Model; Set the Normal/Uplink Push Button; If you are connecting to port 4 on the; Connecting Device; Connect the Hub to a Network

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Cascading refers to connecting hubs together to increase the number of ports orthe number of users supported on the network. The 10BASE-T ports can be usedto cascade hubs together. The twisted pair cable extended from a 10BASE-T port (or ...

Page 9 - Cascade the Hub; Ethernet specifications limit the number of hubs with twisted

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Cascade the Hub The following illustration shows cascading hubs together in a hierarchical starthrough the 10BASE-T ports and indicates the setting of the Normal/Uplinkpush button on each hub. The following illustration shows cascading hu...

Page 10 - The green Link LED on each connected port is on.; Network Interface Cards; Symptom; Verify the Installation

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide To complete the installation, connect the power cord first to the power receptacleon the hub rear panel and then to the power outlet on the wall. When power hasbeen applied to the hub: • The green Pwr (Power) LED on the front panel is on....

Page 11 - Hub Integrity; Order code; Replacement Power Adapter

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Hub Integrity If required, verify the integrity of the hub by resetting it. Turn power to theswitch off and then back on. If the problem continues and you have completedall the preceding diagnoses, contact NETGEAR Customer Support. For th...

Page 12 - Technical Specifications

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide General Specifications Network Protocol and Standards Compatibility IEEE 802.3i, 10BASE-T Ethernet Data Rate 10 Mbps, Manchester encoded Interface Model EN104 TP hub Model EN106 TP hub Model EN108 TP hub 4, 10BASE-T ports (RJ-45)6, 10BASE...

Page 13 - Trademarks

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide © 2000 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR™ is a trademark of NETGEAR, Inc. Windows® is a registered trademark of MicrosoftCorporation. Other brand and product names are trademarks or registered trademarks of their re...