Page 2 - Model DS309 Dual Speed Hub Installation Guide; Start Here
Model DS309 Dual Speed Hub Installation Guide Start Here The NETGEAR ™ Model DS309 Dual Speed Hub is a network hub that enables users to mix and match 10 and 100 megabit per second (Mbps) devices on the same network. This capabilityeliminates the high cost and complexity of separate network equipmen...
Page 3 - Verify that your package contains the following:; Package Contents; Wall Mount
Model DS309 Dual Speed Hub Installation Guide Package Contents Verify that your package contains the following: • Model DS309 hub • Mounting kit (for wall installation) • This installation guide • Warranty & Owner Registration Card • Support Information Card • Power cord Package Contents 9004FA ...
Page 4 - Front Panel Features; Label; Product Illustration; Power
Model DS309 Dual Speed Hub Installation Guide Product Illustration Front Panel Features On the front panel are LEDS that provide information about network traffic status, show datatransmission speed, and indicate when power is supplied to the hub. Front Panel LEDs The Model DS309 hub provides front ...
Page 5 - Rear Panel Features; The following table describes the vista RJ-45 connector LEDs.; Normal/Uplink Push Button
Model DS309 Dual Speed Hub Installation Guide Rear Panel Features On the rear panel are the vista RJ-45 network ports with built-in LEDs and the Normal/Uplinkpush button. Vista RJ-45 Network Ports with Built-in LEDs All of the ports on the hub are 10/100 Mbps capable autosensing Ethernet ports. Each...
Page 6 - 0 Mbps or 100 Mbps Transmission with the Hub; Applications; Key
Model DS309 Dual Speed Hub Installation Guide Applications The Model DS309 hub is designed to provide flexibility in configuring your network connections.Each hub can be used as a standalone device or can be used with 10 Mbps or 100 Mbps hubs orother interconnection devices in various configurations...
Page 7 - Characteristic; Prepare the Site
Model DS309 Dual Speed Hub Installation Guide 1. Prepare the Site Before you begin installing your Model DS309 hub, prepare the installation site. Make sure youroperating environment meets the operating environment requirements of the equipment. 2. Install the Hub To install your hub on a flat surfa...
Page 9 - Twisted Pair Cables; twisted pair cable
Model DS309 Dual Speed Hub Installation Guide Twisted Pair Cables For two devices to communicate, the transmitter of each device must be connected to the receiverof the other device. The crossover function is usually implemented internally as part of thecircuitry in the device. Most ports on hubs an...
Page 10 - When power has been applied to the hub:; Symptom; Verify Installation
Model DS309 Dual Speed Hub Installation Guide 4. Verify Installation When power has been applied to the hub: • The green Pwr (Power) LED on the front panel is on. • The green Link LED on each connected port is on. When the hub is connected and operating, refer to the tables in “Front Panel LEDs” and...
Page 11 - Technical Specifications
Model DS309 Dual Speed Hub Installation Guide Technical Specifications General Specifications Network Protocol and Standards Compatibility ISO/IEC 802-3 (ANSI/IEEE 802.3i) 10BASE-T EthernetIEEE 802.3u, IEEE802.3x 100BASE-TX Fast Ethernet Status LEDs Unit Power 10 Mbps network segment Utilization %,c...
Page 12 - Trademarks; Read instructions for correct handling.; Note; Reorient or relocate the receiving antenna.; EN 55 022 Declaration of Conformance
Model DS309 Dual Speed Hub Installation Guide © 2000 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR™ is a trademark of NETGEAR, Inc. Windows® is a registered trademark of MicrosoftCorporation. Other brand and product names are trademarks or registered trademarks of their respectiveholders....