Netgear DS106 - Manuals - manualsarea.com

Page 3 - Package Contents

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide Verify that the package contains the following items, as shown in the diagram: • DS100 Series hub • Wall mount hardware • Rubber footpads for tabletop installation • This installation guide • Warranty & Owner Registration Card • Sup...

Page 4 - Typical Applications

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide Refer to the following illustration when connecting your DS100 Series hub. Theillustration shows a Model DS116 hub connecting users to a printer, servers, anda router. You can substitute a Model DS104, Model DS106, or Model DS108hub, de...

Page 5 - Product Illustration

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide Front-Panel LEDs The DS100 Series hubs provide front-panel LEDs for monitoring individualports and hub status. The following tables describe the front-panel LEDs andtheir functions. Product Illustration Normal/Uplink 100M Link Activity ...

Page 7 - LED Status; On; network ports

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide Vista RJ-45 Network Ports with Built-in LEDs The front panel of the Model DS104 hub provides four vista RJ-45 networkports (six on the Model DS106 hub, eight on the Model DS108 hub, 16 on theModel DS116 hub). These standard RJ-45 connec...

Page 8 - Install the Hub on a Flat Surface; To install the hub on a flat surface:; Set the hub on a table or shelf so that it has at least 2 inches (5 cm) of; Install the Hub on a Wall; To install the hub on a wall:; Set the mounting screws and anchors (supplied with the wall mount; Characteristic; Installation Procedures

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide Before you begin installing the hub, prepare the installation site. Make sure thesite meets the operating environment requirements of the equipment. Install the Hub on a Flat Surface If installing the hub on a flat surface such as a tab...

Page 9 - Set Normal/Uplink Push Button; 00 Mbps operation requires the use of Category 5 UTP; Connect a PC to the Hub

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide Set Normal/Uplink Push Button The Normal/Uplink push button on the front panel of the hub allows you toselect the Uplink (MDI) or Normal (MDI-X) position for port 4 on the ModelDS104 hub, port 6 on the Model DS106 hub, port 8 on the Mod...

Page 10 - 0 or 100 Mbps Transmission with the Hub

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide 10 or 100 Mbps Transmission with the Hub Two Model DS104 hubs, two Model DS106 hubs, two Model DS108 hubs, twoModel DS116 hubs, or a combination of DS100 Series hubs can be daisy-chained together at 100 Mbps to support a growing number ...

Page 11 - Symptom; Check the Normal/Uplink push button on the front panel.; Verify the Installation

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide When installation is complete and power has been applied to the hub, thefollowing conditions should exist: • Power LED is on. • Link LED on each connected port is on. • Utilization LEDs on the front panel are blinking when data is being...

Page 12 - Technical Specifications

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide Specification Model DS116 Hub Model DS108 Hub Model DS106 Hub Model DS104 Hub Network Ports (RJ-45) 16 8 6 4 Dimensions Width Height Depth 11.3 in. (286 mm)1.1 in. (27 mm)4.0 in. (101 mm) 9.3 in. (235 mm)1.1 in. (27 mm)4.0 in. (101 mm) ...

Page 13 - Keep the power cord for the DS116 power supply.; Replacement Power Adapter

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide If, for any reason, the power adapter for any of the hubs fails, please contactNETGEAR immediately to order a replacement adapter. Use the following tableto when ordering a speciﬁc power adapter. If you are replacing a power supply, ple...