Netgear 208-10026-01 - Manuals

Netgear 208-10026-01 – Manual in PDF format online.

Manuals:

Manual

Manual Netgear 208-10026-01

Summary

Page 3 - Contents; ADSL Modem Router Setup Manual

1 v1.1, 2006-2 Contents ADSL Modem Router Setup Manual Chapter 1 Connecting the Router to the Internet What’s in the Box? .......................................................................................................... 1-1 The Router’s Front Panel .............................................

Page 5 - The product package should contain the following items:

Connecting the Router to the Internet 1-1 v1.1, 2006-2 Chapter 1 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describes how to set up your ADSL modem router for Internet access and configure bas...

Page 6 - The Router’s Front Panel; You can use the LEDs to verify various conditions.

ADSL Modem Router Setup Manual 1-2 Connecting the Router to the Internet v1.1, 2006-2 The Router’s Front Panel The ADSL modem router front panel shown below contains status LEDs. You can use the LEDs to verify various conditions. Table 1-1 describes each LED. Figure 1-1 Table 1-1. LED Descriptions L...

Page 7 - The Router’s Rear Panel; What You Need Before You Begin

ADSL Modem Router Setup Manual Connecting the Router to the Internet 1-3 v1.1, 2006-2 The Router’s Rear Panel The rear panel of the ADSL modem router contains port connections. Viewed from left to right, the rear panel contains the following elements: 1. RJ-11 ADSL port for connecting the router to ...

Page 8 - Internet Configuration Requirements; Smart Wizard Setup

ADSL Modem Router Setup Manual 1-4 Connecting the Router to the Internet v1.1, 2006-2 Internet Configuration Requirements Depending on how your ISP set up your Internet account, you need one or more of these configuration parameters to connect your router to the Internet: • Virtual Path Identifier (...

Page 9 - Insert the NETGEAR CD into a Windows PC.; Manual Setup; Understanding ADSL Microfilters

ADSL Modem Router Setup Manual Connecting the Router to the Internet 1-5 v1.1, 2006-2 1. Locate the ADSL settings information your Internet service provider gave you. 2. Insert the NETGEAR CD into a Windows PC. The CD will automatically start and detect the language you are using on your PC. 3. Acce...

Page 10 - ADSL Microfilter; Computers Set to DHCP; Manually Setting Up Your ADSL Modem Router; There are four steps to setting up your ADSL modem router:

ADSL Modem Router Setup Manual 1-6 Connecting the Router to the Internet v1.1, 2006-2 ADSL Microfilter Each device such as a telephone, fax machine, answering machine, or caller ID display will require an ADSL microfilter. ADSL Microfilter with Built-In Splitter Use an ADSL microfilter with built-in...

Page 11 - Install ADSL filters on the phone lines.

ADSL Modem Router Setup Manual Connecting the Router to the Internet 1-7 v1.1, 2006-2 1. Install ADSL filters on the phone lines. 2. Connect the router to the ADSL line. 3. Log in to the router. 4. Connect to the Internet. Follow the steps below to connect your router to your network. Before you beg...

Page 12 - Two-Line Filter Example; . Insert the two-line filter into the phone outlet and connect the

ADSL Modem Router Setup Manual 1-8 Connecting the Router to the Internet v1.1, 2006-2 b. Two-Line Filter Example . Insert the two-line filter into the phone outlet and connect the phone to the phone line connector ( A) : Figure 1-6 Note: To use a one-line filter with a separate splitter, insert the ...

Page 13 - Connect the ADSL modem router to the ADSL filter.

ADSL Modem Router Setup Manual Connecting the Router to the Internet 1-9 v1.1, 2006-2 2. Connect the ADSL modem router to the ADSL filter. a. Using the included phone cable with RJ-11 jacks, connect the ADSL port ( B) of the ADSL modem router to the ADSL port ( C) of the two-line filter. Figure 1-7 ...

Page 14 - “Preparing a Computer for Network Access”

ADSL Modem Router Setup Manual 1-10 Connecting the Router to the Internet v1.1, 2006-2 b. Connect the Ethernet cable ( D) from a ADSL modem router LAN port to the Ethernet adapter in your computer. c. Connect the power adapter to the router and plug it in to a power outlet. Verify the following: The...

Page 15 - admin

ADSL Modem Router Setup Manual Connecting the Router to the Internet 1-11 v1.1, 2006-2 a. Type http://192.168.0.1 in the address field of a browser such as Internet Explorer or Netscape ® Navigator. This login window opens: Enter admin for the user name and password for the password, both in lower c...

Page 16 - Test your Internet connection.

ADSL Modem Router Setup Manual 1-12 Connecting the Router to the Internet v1.1, 2006-2 You are now ready to configure your ADSL modem router to connect to the Internet. There are two ways you can configure your ADSL modem router to connect to the Internet: a. Let the ADSL modem router Setup Wizard a...

Page 17 - Chapter 2; Basic Functioning

Troubleshooting 2-1 v1.1, 2006-2 Chapter 2 Troubleshooting This chapter gives information about troubleshooting your ADSL modem router. After each problem description, instructions are provided to help you diagnose and solve the problem. For the common problems listed, go to the section indicated. •...

Page 18 - b. The LAN port LEDs are lit for any local ports that are connected.; Power LED Not On; If the Power and other LEDs are off when your router is turned on:; Test LED Never Turns On or Test LED Stays On; If you experience problems with the Test LED:

ADSL Modem Router Setup Manual 2-2 Troubleshooting v1.1, 2006-2 b. The LAN port LEDs are lit for any local ports that are connected. c. The ADSL Internet port LED is lit. If a port’s LED is lit, a link has been established to the connected device. If a LAN port is connected to a 100 Mbps device, ver...

Page 19 - LAN or ADSL Internet Port LEDs Not On; Troubleshooting the Web Configuration Interface

ADSL Modem Router Setup Manual Troubleshooting 2-3 v1.1, 2006-2 LAN or ADSL Internet Port LEDs Not On If either the LAN LEDs or ADSL Internet LED do not light when the Ethernet connection is made, check the following: • Make sure that the Ethernet cable connections are secure at the router and at th...

Page 20 - and the password is; password; . Make sure that CAPS LOCK is off when entering this; Apply; button before moving to; Troubleshooting the ISP Connection; ADSL link; ADSL Internet LED Green or Blinking Green

ADSL Modem Router Setup Manual 2-4 Troubleshooting v1.1, 2006-2 • Make sure you are using the correct login information. The factory default login name is admin and the password is password . Make sure that CAPS LOCK is off when entering this information. If the router does not save changes you have...

Page 21 - ADSL; Obtaining an Internet IP Address; To check the Internet IP address from the browser interface:

ADSL Modem Router Setup Manual Troubleshooting 2-5 v1.1, 2006-2 If disconnecting telephones does not result in a green ADSL Internet LED, there may be a problem with your wiring. If the telephone company has tested the ADSL signal at your Network Interface Device (NID), then you may have poor qualit...

Page 22 - Your ISP may require a login program.; Troubleshooting PPPoE or PPPoA; The PPPoA or PPPoA connection can be debugged as follows:

ADSL Modem Router Setup Manual 2-6 Troubleshooting v1.1, 2006-2 Verify with your ISP the Multiplexing Method and parameter value, and update the router’s ADSL Settings accordingly. • Your ISP may require a login program. Ask your ISP whether they require PPP over Ethernet (PPPoE) or PPP over ATM (PP...

Page 23 - Troubleshooting Internet Browsing; Your computer may not recognize any DNS server addresses.; Troubleshooting a TCP/IP Network Using the Ping Utility; Testing the LAN Path to Your Router; To ping the router from a PC running Windows 95 or later:

ADSL Modem Router Setup Manual Troubleshooting 2-7 v1.1, 2006-2 If you cannot connect after several minutes, you may be using an incorrect Service Name, User Name or Password. There also may be a provisioning problem with your ISP. Troubleshooting Internet Browsing If your ADSL modem router can obta...

Page 24 - OK; “LAN; Testing the Path from Your Computer to a Remote Device; IP address

ADSL Modem Router Setup Manual 2-8 Troubleshooting v1.1, 2006-2 1. From the Windows toolbar, click the Start button and select Run. 2. In the field provided, type Ping followed by the IP address of the router, as in this example: ping 192.168.0.1 3. Click OK . You should see a message like this one:...

Page 25 - Restoring the Default Configuration and Password; current configuration and restore factory defaults in two ways:; Using the Reset Button

ADSL Modem Router Setup Manual Troubleshooting 2-9 v1.1, 2006-2 — Check that your PC has the IP address of your router listed as the default gateway. If the IP configuration of your PC is assigned by DHCP, this information will not be visible in your PC’s Network Control Panel. Verify that the IP ad...

Page 27 - Appendix A

Technical Specifications A-1 v1.1, 2006-2 Appendix A Technical Specifications This appendix provides technical specifications for the ADSL modem router. Network Protocol and Standards Compatibility Data and Routing Protocols: TCP/IP, RIP-1, RIP-2, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or Routed Eth...

Page 29 - Appendix B

Related Documents B-1 v1.1, 2006-2 Appendix B Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link Internet Networking and TCP/IP Addressing http://documentation.netgear...