Netgear 2.4 GHz MA111 - Manuals

Page 2 - Install the MA111 Driver and Utility Software; Introduction

System Requirements Before installing the MA111 802.11b Wireless USB Adapter, please make sure that yourcomputer system has the following: • A computer with a USB 1.1/2.0 port. A USB port allows a user to use the same device foreither their desktop or laptop • Windows ® 98/ME/2000/XP (be sure to hav...

Page 4 - Install the MA111 Wireless USB Adapter; Click Finish to complete the installation.; Verify the Driver Installation

2. Click Properties. 3. Open Device Manager: • Windows 98/ME users – Select the Device Manager folder tab. • Windows 2000/XP users – Select the Hardware folder tab, and click on the DeviceManager button. 4. Double-click Network Adapters. There should be no yellow exclamation mark or redcross icon on...

Page 5 - About the MA111 SysTray Application

Once you have completed the utility installation, the Windows SysTray will show the icon indifferent colors, as described here: Double-click the Wireless Adapter SysTray icon to activate the wireless Configuration Utilityfor the MA111 Wireless USB Adapter. You can click any of the folder tabs in the...

Page 6 - Configuration Note for Windows XP Users; Click the Advanced button.; Status Section

Configuration Note for Windows XP Users By default, Windows XP uses its own utility to configure your wireless network settings,however, in order to take advantage of the MA111 features and functions, we recommend thatyou use the NETGEAR MA111 USB Adapter Utility program. To disable Windows XP confi...

Page 10 - About Section; Wireless Network Fundamentals; Wireless Network Configuration; Click OK to continue, or select another tab.; Statistics Section; Click OK to continue or select another tab.; Statistics

About Section The About section of the Configuration Utility dialog box shows the regulatory domain: FCCfor US, ETSI for Europe, MKK for Japan; the MAC address and the release information ofboth the device driver for the Wireless Adapter and the Wireless Configuration Utility software. Click OK to c...

Page 11 - Infrastructure Mode

To set up an Infrastructure network operating with standard protocols, do the following: • Set all wireless stations to connect in Infrastructure mode. • Set all stations to use the same network name (or SSID). • Set all wireless Access Points to use the same network name (or ESSID). • Set all stati...

Page 13 - Problem

Troubleshooting CE Declaration of Conformity For the following equipment: Wireless USB Adapter MA111 is herewith confirmed to comply with the requirements set out in the Council Directive on theApproximation of the Laws of the Member States relating to Electromagnetic Compatibilityand Radio Spectrum...

Page 14 - CE-Konformitätserklärung

Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right tomake changes to the products described in this document without notice. NETGEAR does not assume any liabilitythat may occur due to the use or application of th...

Page 15 - Technical Support

Technical Support PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITHYOUR PRODUCT. By registering your product at www.NETGEAR.com/register, we can provide you with fasterexpert technical support and timely notices of product and software upgrades. NETGEAR, INC. Support Information Phone: ...