Page 2 - CONTENTS; information
TRIPLE-X170 PSU CONTENTS Issue 2: 19th October 2006 PAGE 3 Safety information - Safety information 4 General advice - - Installation precautions User information 5 Item disposal information - EU disposal information 6 Installation - - - - Introduction Installation Connections Cleaning 7 Facilities a...
Page 3 - SAFETY INFORMATION; IMPORTANT; If connecting to a BS1363 plug, a 13 amp fuse must be used.
TRIPLE-X170 PSU SAFETY INFORMATION Issue 2: 19th October 2006 IMPORTANT ! (U.K. only) This unit is supplied in the U.K. with mains lead fitted with a moulded 13 amp plug. If, for any reason, you need to cut off the plug, please remove the fuse holder and dispose of the plug safely, out of reach of c...
Page 4 - GENERAL ADVICE; wall socket and
TRIPLE-X170 PSU GENERAL ADVICE Issue 2: 19th October 2006 INSTALLATION PRECAUTIONS and USER INFORMATION Your new TRIPLE-X170 PSU is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions: Heed all warnings shown on the ...
Page 5 - ITEM DISPOSAL INFORMATION
TRIPLE-X170 PSU ITEM DISPOSAL INFORMATION Issue 2: 19th October 2006 DISPOSAL Page 5 of 11 The crossed out wheeled bin label that appears on the the product indicates that the product must not be disposed of as normal household waste. To prevent possible harm to the environment please separate the p...
Page 6 - INSTALLATION
TRIPLE-X170 PSU INSTALLATION Issue 2: 19th October 2006 INTRODUCTION Congratulations on the purchase of your new TRIPLE-X170. The TRIPLE-X170 is an upgrade Power Supply Unit. It increases the power of your X-T100 to 85+85 wpc and improves its peak current. The TRIPLE-X170 PSU will power the X-T100, ...
Page 7 - POWER SUPPLY OPTIONS & WIRING; -component setup, standard power supply; Figure 1; Figure 2; -component setup, upgraded power supply; Figure 3; RAY
TRIPLE-X170 PSU POWER SUPPLY OPTIONS & WIRING Issue 2: 19th October 2006 3-component setup, standard power supply X-PLORA V8 TRIPLE-X X-RAY V8 XT-100 Figure 1 The standard 3-component setup using the original TRIPLE-X PSU (bottom left) is shown in figure 1. The power connector from the X-PLORA V...
Page 8 - FACILITIES AND CONNECTION
TRIPLE-X170 PSU FACILITIES AND CONNECTION Issue 2: 19th October 2006 FRONT PANEL 1 2 1. POWER switch 2. POWER Indicator LED REAR PANEL 3 4 5 6 3. XPLORA V8 power socket 4. XRAY V8 power socket 5. XT-100 power socket 6. IEC MAINS Input Page 8 of 11
Page 9 - POWER SUPPLY PROBLEMS?; Problem Probable
TRIPLE-X170 PSU POWER SUPPLY PROBLEMS? Issue 2: 19th October 2006 Basic problem-solving with an amplifier is similar to troubleshooting other electrical or electronic equipment. Always check the most obvious possible causes first, such as the following examples: Problem Probable Cause Remedy No powe...
Page 10 - POWER SUPPLY SPECIFICATIONS
TRIPLE-X170 PSU POWER SUPPLY SPECIFICATIONS Issue 2: 19th October 2006 Connections: Power outputs: 6-way XLR for amplifier. 5-way XLR for CD player. 4-way XLR for tuner Power requirement: 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set), 7 W no load 40 W all devices connected, idle 300W fully loa...
Page 11 - MANUAL REVISION; RELEASE DATE CHANGES; Issue 1; release
TRIPLE-X PSU MANUAL REVISION Issue 2: 19th October 2006 RELEASE DATE CHANGES Issue 1 18 th October 2006 1 st release Issue 2 19 th October 2006 Improved P.7 Page 11 of 11