Musical Fidelity M6I - Manuals

Page 2 - CONTENTS; Page

Issue 4 Page 2 of 14 CONTENTS Section Page Safety Information – Mains plug (UK only), modification warning 3 General advice – Installation precautions 4 Disposal information – EU disposal information 5 Installation – Introduction, cleaning, installation, power connections, audio connections 6 Facili...

Page 3 - SAFETY INFORMATION; It must not be plugged into a mains outlet.; WARNING – This appliance MUST be earthed

Issue 4 Page 3 of 14 SAFETY INFORMATION IMPORTANT! (U.K. only) This unit is supplied in the U.K. with mains lead fitted with a moulded 13 amp plug. If, for any reason, it is necessary to remove the plug, please remove the fuse holder and dispose of the plug safely, out of reach of children. It must ...

Page 4 - GENERAL ADVICE; Installation, Precautions & User Information

Issue 4 Page 4 of 14 GENERAL ADVICE Installation, Precautions & User Information This new M6i is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions: • Heed all warnings shown on the back of the product. • Only c...

Page 5 - ITEM DISPOSAL INFORMATION

Issue 4 Page 5 of 14 ITEM DISPOSAL INFORMATION DISPOSAL The crossed out wheeled bin label that appears on the back panel of the product indicates that the product must not be disposed of as normal household waste. To prevent possible harm to the environment please separate the product from other was...

Page 6 - INSTALLATION; Cleaning

Issue 4 Page 6 of 14 INSTALLATION Introduction Congratulations on the purchase of the new M6i integrated amplifier. Great attention has been paid to internal layout, isolating each circuit section to prevent possible interaction. The unit features a finely tuned and tweaked preamplifier, for smooth ...

Page 7 - FACILITIES & CONNECTIONS

Issue 4 Page 7 of 14 FACILITIES & CONNECTIONS 1 2 3 4 5 1 ON/OFF Button 2 TAPE MONITOR button 3 BALANCED, CD, USB, TUNER, HT/AUX, TAPE input selector buttons 4 VOLUME control 5 IR RECEIVER lens 6 7 8 9 10 11 12 13 6 LOUDSPEAKER OUTPUT Right 7 USB input from computer 8 BALANCED XLR right and left...

Page 8 - REMOTE CONTROL HANDSET

Issue 4 Page 8 of 14 REMOTE CONTROL HANDSET The universal remote control shown below enables functions from this and related units to be operated from a convenient distance. Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other functions are ...

Page 9 - OPERATION; Volume

Issue 4 Page 9 of 14 OPERATION Starting Once all connections are made, switch on the unit, using the POWER button front of the unit. The MUTE LED will light. Speaker outputs are muted for about 6 seconds, so no sound will be heard from the speakers. Once the 6 seconds is up the MUTE LED goes out, in...

Page 10 - TAPE MONITOR

Issue 4 Page 10 of 14 OPERATION TAPE To use the TAPE input, connect external source to the TAPE input (see page 7). Select TAPE input by pressing the TAPE button so TAPE LED is lit. Selecting the TAPE input can also be achieved by pressing the corresponding button on the remote handset (see page 8)....

Page 11 - Computer setup for input USB input

Issue 4 Page 11 of 14 OPERATION USB input For the USB input, the LED will flash in absence of digital input signal. When a signal is present, the LED will light continuously. Computer setup for input USB input A good quality USB A to B cable is required to connect the unit to the computer. Plug the ...

Page 13 - SPECIFICATIONS; specification or feature changes without notice.

Issue 4 Page 13 of 14 SPECIFICATIONS Output Power 200 Watts per channel into 8 Ohms (23dBW) Voltage 45 Volts RMS, 20Hz to 20 kHz; onset of clipping (126 Volts peak-to-peak) Current peak-to-peak 45 Amps Damping factor 170 Output devices 2 pairs per channel Line input THD+N <0.01% typical, 20Hz to ...

Page 14 - MANUAL HISTORY; RELEASE DATE

Issue 4 Page 14 of 14 MANUAL HISTORY RELEASE DATE CHANGES Issue 1 24 th July 2009 1 st release Issue 2 14 th October 2009 Formatting Issue 3 16 th October 2009 Page 11 footer Issue 4 9 th November 2009 Back panel updated