Page 2 - Page; CONTENTS
M1 ViNL manual issue 2.doc2 Page 2 of 12 Section Page Safety Information – Mains plug (UK only), modification warning 3 General advice – Installation precautions 4 Disposal information – EU disposal information 5 Installation – Introduction, cleaning, installation, power connections, audio connectio...
Page 3 - It must not be plugged into a mains outlet.; Green; WARNING – This appliance MUST be earthed; SAFETY INFORMATION
M1 ViNL manual issue 2.doc2 Page 3 of 12 IMPORTANT! (U.K. only) This unit is supplied in the U.K. with mains lead fitted with a moulded 13 amp plug. If, for any reason, it is necessary to remove the plug, please remove the fuse holder and dispose of the plug safely, out of reach of children. It must...
Page 4 - Installation, Precautions & User Information; GENERAL ADVICE
M1 ViNL manual issue 2.doc2 Page 4 of 12 Installation, Precautions & User Information This new M1 VINL is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions: • Heed all warnings shown on the back of the product....
Page 5 - ITEM DISPOSAL INFORMATION
M1 ViNL manual issue 2.doc2 Page 5 of 12 DISPOSAL The crossed out wheeled bin label that appears on the back panel of the product indicates that the product must not be disposed of as normal household waste. To prevent possible harm to the environment please separate the product from other waste to ...
Page 6 - INSTALLATION
M1 ViNL manual issue 2.doc2 Page 6 of 12 Introduction Congratulations on the purchase of the new M1 ViNL player. This unit will give top quality performance when used as a top quality record player delivering the best performance possible from vinyl recordings. Cleaning Before cleaning the unit, swi...
Page 7 - FACILITIES & CONNECTIONS
M1 ViNL manual issue 2.doc2 Page 7 of 12 1 2 3 4 5 6 7 8 1 DISPLAY LCD backlit black and white 2 POWER ON/STANDBY button 3 MM moving magnet selector button 4 MM-R MM load resistor selector button 5 MM-C MM load capacitor selector button 6 MC moving coil selector button 7 MC-R MC load resistor select...
Page 8 - OPERATION
M1 ViNL manual issue 2.doc2 Page 8 of 12 Switch on and introduction. Make sure the unit is fully connected up and plugged into the mains. Check that the cartridge/turntable outputs are connected to the correct inputs (MM or MC) for the cartridge being used. The orange POWER/STBY LED will be lit indi...
Page 10 - Problem Probable
M1 ViNL manual issue 2.doc2 Page 10 of 12 Basic problem-solving with an amplifier is similar to troubleshooting other electrical or electronic equipment. Always check the most obvious possible causes first, such as the following examples: Problem Probable Cause Remedy No power Mains power supply is ...
Page 11 - SPECIFICATIONS
M1 ViNL manual issue 2.doc2 Page 11 of 12 SPECIFICATIONS MM input Frequency response RIAA or RIAA/IEC (selectable) ±0.2dB Input sensitivity 3mV in for 300mV out (at 1 kHz) Input impedance 47K Ω or 68K Ω selectable Input capacitance 50-400pF selectable THD at 1 kHz <0.01% Overload margin 31dB Sign...
Page 12 - MANUAL HISTORY; RELEASE DATE; Issue 1; issue
M1 ViNL manual issue 2.doc2 Page 12 of 12 MANUAL HISTORY RELEASE DATE CHANGES Issue 1 14th April 2011 1 st issue Issue 2 12 th January 2012 P.7 indicator 14 corrected.