Page 2 - SAFETY INFORMATION; It must not be plugged into a mains outlet; WARNING - This appliance must be earthed; If connecting to a BS1363 plug, a 13 amp fuse must be used.
kW 500 Integrated Amplifier Instructions for use Page 2 of 10 SAFETY INFORMATION Issue 2: Sept 2004 IMPORTANT! (U.K. only) This unit is supplied in the U.K. with a mains lead fitted with a moulded 13 amp plug. If, for any reason, you need to cut off this plug, please remove the fuse holder and dispo...
Page 3 - GENERAL ADVICE; INSTALLATION PRECAUTIONS and USER INFORMATION
kW 500 Integrated Amplifier Instructions for use Page 3 of 10 GENERAL ADVICE Issue 2: Sept 2004 INSTALLATION PRECAUTIONS and USER INFORMATION Your new kW 500 Integrated amplifier is designed and built to provide trouble-free perform-ance, but as with all electronic devices it is necessary to observe...
Page 4 - CONNECTIONS; AND; Main unit front panel layout
kW 500 Integrated Amplifier Instructions for use Page 4 of 10 CONNECTIONS AND FACILITIES - MAIN UNIT Issue 2: Sept 2004 11 12 13 14 15 16 17 18 19 Main unit front panel layout 1 Illuminated feet with multi-colourindicator LEDs for power and mute 2 TAPE MONITOR selector button and LED 3 PHONO input s...
Page 5 - Power supply unit back panel layout
kW 500 Integrated Amplifier Instructions for use Page 5 of 10 CONNECTIONS AND FACILITIES - POWER SUPPLY Issue 2: Sept 2004 FOR USE ONLY WITH MUSICAL FIDELITY KW 500 Power supply unit back panel layout 1 Right power amplifier PSU output 2 Pre-amplifier PSU output 3 Left power amplifier PSU output 4 R...
Page 6 - REMOTE CONTROL
kW 500 Integrated Amplifier Instructions for use Page 6 of 10 Issue 2: Sept 2004 REMOTE CONTROL REMOTE CONTROL The blue buttons on the remote control enable main functions of the amplifier to be operatedfrom a convenient distance. Remaining buttons on this universal handset are for use with otherMus...
Page 7 - PRE-AMPLIFIER OUTPUT
kW 500 Integrated Amplifier Instructions for use Page 7 of 10 CONNECTIONS Issue 2: Sept 2004 PRE-AMPLIFIER OUTPUT The kW 500 Integrated amplifier has itspre-amplifier output available from RCAsockets on the back panel marked PRE- OUT , and is controlled by the volume adjustment. This is to allow “bi...
Page 8 - OPERATION; POWER; OVERLOAD PROTECTION; TAPE; OFF TAPE MONITORING; TAPE MONITOR
kW 500 Integrated Amplifier Instructions for use Page 8 of 10 Issue 2: Sept 2004 OPERATION STARTING . . . . Press the POWER button on the front panel of the kW 500 power supply unit. The blueLED above the button should now light. The LEDs in the feet of the amplifier unitwill light red for about fif...
Page 9 - TROUBLESHOOTING; Problem
kW 500 Integrated Amplifier Instructions for use Page 9 of 10 Issue 2: Sept 2004 TROUBLESHOOTING Basic problem-solving with an amplifier is similar to troubleshooting any other electrical orelectronic equipment. Always check the most obvious possible causes first. To give you a fewideas of what to l...
Page 10 - Dual Mono Integrated Amplifier
kW 500 Integrated Amplifier Instructions for use Page 10 of 10 SPECIFICATIONS : Issue 2: Sept 2004 Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice Output: Voltage RMS: 63 . 9 Volts 20Hz to 20kHz Voltage peak to peak: 180 . ...