Multiquip V304 - Manuals

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 5 www .multiquip .com Ordering parts has never been easier! Choose from three easy options: WE ACCEPT ALL MAJOR CREDIT CARDS! When ordering parts, please supply: R Dealer Account Number R Dealer Name and Address R Shippin...

PAGE 6 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — SAFETY MESSAGE ALERT SYMBOLS Safety precautions should be followed at all times whenoperating this equipment. Failure to read and understand theSafety Messages and Operating Instructions could result ininjury to y...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 7 Accidental Starting V304 — SAFETY MESSAGE ALERT SYMBOLS ALWAYS place the engine ON/OFF switch in the OFF position, and remove the ignition key when the machine is not in use. Respiratory Hazard A LWAY S w e a r a p p r ...

PAGE 8 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) RULES FOR SAFE OPERATION ■ ALWAYS refuel in a well-ventilated area, away from sparks and open flames. ■ ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool...

PAGE 10 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) OPERATION AND SAFETY DECALS Machine Safety Decals The V304 Compaction Roller is equipped with a number of safety decals. These decals are provided for operator safety andmaintenance information. The illustration below a...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 11 V304 — SPECIFICATIONS S N O I T A C I F I C E P S R E L L O R . 2 E L B A T e c r o F t c a p m I ) g k 2 9 6 , 1 ( . s b l 0 3 7 , 3 y c n e u q e r F m p v 0 0 4 , 4 y t il i b a e d a r G t n e c r e P 1 2 h t d i W...

PAGE 14 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) Figure 3. Roller Components 1 V304 — ROLLER COMPONENTS

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 17 V304 — ENGINE COMPONENTS Figure 6. Engine Controls and Components (HONDA) INITIAL SERVICING The engine (Figure 6) must be checked for proper lubrication andfilled with fuel prior to operation. Refer to the manufacturer...

PAGE 18 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — GENERAL INFORMATION The V304 Vibratory Roller is a walk-behind vibratory rollerspecifically designed for the compaction and patching of asphalttype surfaces. The compaction force is delivered by a 30-inch wide st...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 19 V304 — GENERAL INFORMATION Tipping (Rollovers) NEVER! operate the roller on side slopes (Figure 9). The possibility exist that the roller could tip over (roll over), thuscausing bodily harm even death and serious damag...

PAGE 20 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — INSPECTION Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the ROLLER, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3. Check the ...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 21 Gasoline Check 1. Remove the gasoline cap located on top of fuel tank. 2. Handle Fuel in a safety container. If the container does not have a spout use a funnel. 3. Visually inspect to see if fuel level is low. If fuel...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 23 V304 — INITIAL START-UP Initial Start-up Instructions Handle Bar Adjustment Adjustment of the handle bar is made by removing thehandle bar hitch pin , then pulling the release pin. Once released pin has been removed, p...

PAGE 24 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — INITIAL START-UP 3. Place the Engine ON/OFF switch (Figure 21) in the "ON" position. Figure 21. Engine Ignition Switch (0n Position) Figure 22. Choke Lever NOTE The CLOSED position of the choke lever enri...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 25 V304 — OPERATION Operation NEVER perform service or maintenance on the roller when the engine is running.The engines used with this roller DO NOT require a pre-mix of oil and gasoline. CAUTION : 1. Squeezing the left c...

PAGE 28 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) Adjusting or Changing Vibratory V-Belt 1. To adjust the vibrator y V-belt, loosen the pulley tensioner nut (Figure 33) and adjust the V-belt for approximately 2to 2-1/2 inches (5 to 6 cm.) of deflection. Check V-beltdef...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 29 Clutch and Engine coupling Lubrication Lubricate the clutch and engine coupling as shown in Figure 36. V304 — MAINTENANCE Figure 36. Clutch and Engine Coupling Lubrication Points (Zerk Fittings) ZERK FITTING ZERK FITTI...

PAGE 30 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — PREPARATION FOR LONG -TERM STORAGE Roller Storage For storage of the roller for over 30 days, the following isrecommended:  Drain the fuel tank completely.  Run the engine until the fuel in the injection system...

PAGE 34 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 35 V304 — SUGGESTED SPARE PARTS V304 1 TO 3 UNITS WITH HONDA GX340K1QAE,ROBIN EH-34OYSO610 AND YANMAR L100ADDEENGINES. 1 to 3 Units Qty. P/N Description 12 .......... EM906131 ....... BUSHING12 .......... EM906132 ..........

PAGE 36 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — NAME PLATE AND DECALS 5 4 2 12 1 9 3 6 10 11 14 7 13 8 15 NAME PLATE AND DECALS

PAGE 38 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — COCOA MAT ASSY. COCOA MAT ASSY. 16 17 9 24 20 21 19 16 17 19 1 11 26 6 9 24 4 3 10 23 23 23 6 7 5 24 9 8 13 14 24 10 1 8 7 9 8 2 2 3 25 7 3 2 25 25 7 8 1 10 25 3 2 15 18 18 5 10 12 22 27 28 29 30 30 31 31 32 32 3...

V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 39 V304 — COCOA MAT ASSY. COCOA MAT ASSY. NO PART NO PART NAME QTY. REMARKS 1 EM505543 ARM, RH STABILIZER ROLLER ............... 2 ............... S/N 251200 AND BELOW 2 EM923348 WASHER, LOCK 5/8 4 3 EM969023 NUT, 5/8 - 1...

PAGE 40 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — TRAVEL LINKAGE ASSY. 11 10 9 5 4 3 2 12 10 12 11 16 21 16 16 18 19 17 15 20 9 24 23 13 4 22 14 5 4 13 9 9 8 7 1 2 5 7 7 6 25 26 28 27 28 29 NOTES: INCLUDED WITH PUMPOVERRIDE LEVER, ITEM 25. 1 1 30 31 TRAVEL LINKA...

PAGE 42 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — VIBRATORY LINKAGE ASSY. 5 13 12 11 10 14 4 17 21 21 20 16 4 15 14 4 12 4 14 19 5 4 7 8 6 2 1 18 PART OF CHASSIS 9 23 3 22 4 1 17 19 18 24 VIBRATORY LINKAGE ASSY.

PAGE 44 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — HANDLE ASSY. HANDLE ASSY.

PAGE 46 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — CHASSIS ASSY. CHASSIS ASSY.

PAGE 48 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — TRANSPORT HOOKS ASSY. TRANSPORT HOOKS ASSY.

PAGE 50 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — PUMP DRIVE ASSY. PUMP DRIVE ASSY. 20 6 18 14 13 12 10 9 9 7 1 4 3 6 5 2 15 16 17 11 21 8 8 3 NOTES: INCLUDED WITH HYDROSTATIC PUMP, ITEM 20. 1 19 22

PAGE 52 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — VIBRATORY DRIVE ASSY. VIBRATORY DRIVE ASSY. 19 9 7 11 12 13 18 17 16 1 2 3 4 5 20 18 7 8 6 NOTES: INCLUDED WITH PULLEYCLUTCH, ITEM 5. 1 1 2 INCLUDED WITH VIBRATORYSHAFT, ITEM 8. 2 15 14 13 NEW STYLE CLUTCH ASSY. ...

PAGE 54 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — VIBRATORY ROLL ASSY. VIBRATORY ROLL ASSY. 1 2 3 4 5 6 7 8 9 10 11 13 14 12 15 10 11 12 17 31 32 19 20 18 22 23 21 34 29 28 27 26 25 24 30 33 24 25 27 29 26 44 22 19 20 36 35 38 11 37 11 39 38 11 40 41 42 43 23

PAGE 56 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — BATTERY ASSY. BATTERY ASSY. 1 3 13 14 11 12 2 3 5 6 7 8 9 10 2 3 16 15 4

PAGE 60 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) V304 — TRANSMISSION ASSY. TRANSMISSION

PAGE 62 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) PAYMENT TERMS Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s r...

OPERATION AND PARTS MANUAL Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MULTIQUIP INC. Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written ...