Multiquip SS233 - Manuals

SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 5 safety infOrMatiOn general SaFeTY CauTion  never operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devic...

page 6 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) safety infOrMatiOn pump SaFeTY danger  never operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fi re could result causing severe bodily harm or even death.  never use pum...

SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 7 safety infOrMatiOn power Cord/Cable Safety danger  never let power cords or cables lay in water.  never use damaged or worn cables or cords. Inspect for cuts in the insulation.  never grab or touch a live power cord...

page 8 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) speCifiCatiOns Table 1. Specifications model SS233 Type Submersible Pump impeller Plastic Suction & discharge Size 2.00 in. (50.8 mm) maximum pumping Capacity 60 gallons/minute (227 liters/minute) discharge Height ...

SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 9 general infOrMatiOn inTroduCTion The SS233 submersible pump is designed to pump water and is used for the draining (de-watering) of flooded rooms, drains and fill tanks, power fountains and waterfalls swimming pool cov...

page 10 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) COMpOnents 3 3 1 3 4 5 6 7 2 Figure 1. Submersible Pump Components Figures 1 shows the location of the basic components for the SS233 submersible pump. Listed below is a brief explanation of each component.1. aC power...

SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 11 OperatiOn 1. Attach a suitable lifting cable (rope) to the carrying handle (Figure 2) on the pump and lower the pump into place. For applications where there is an excessive amount of mud, grit or silt, the use of a s...

page 12 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) 4. NEVER! grab or touch a live power cord (Figure 4) with wet hands, the possibility exists of electrical shock, electrocution and even death. Figure 4. Power Cord (Wet Hands) 5. If all of the pump's electrical requir...

SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 13 trOubleshOOting Table 2. pump Troubleshooting Symptom possible problem Solution Pump Fails To Start Incorrect voltage/amps? Check that proper voltage (115 VAC 1Ø) is being supplied to the pump. Also check that there i...

page 14 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) explanatiOn Of COde in reMarks COluMn The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are a...

SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) — page 15 nOtes

page 18 — SS233 SubmerSible pump • operaTion and parTS manual — rev. #2 (03/22/10) terMs and COnditiOns Of sale — parts paYmenT TermS Terms of payment for parts are net 30 days. FreigHT poliCY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments ar...

OperatiOn and parts Manual Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2010, MULTIQUIP INC. Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written ...