Multiquip RX 1510-C/-I/-CI - Manuals

Page 2 - proposition 65 warning; Diesel engine exhaust and some of

proposition 65 warning Diesel engine exhaust and some of

Page 3 - Rammax Maschinenbau GmbH; Gutenbergstraße 33; Document identification:

RX 1510-C/-I/-CI – 3 – Product identiﬁcation: Type: RX 1510 Model: -C/-I/-CI Series number: Production date: Manufacturer: Rammax Maschinenbau GmbH Gutenbergstraße 33 72555 Metzingen Telephone 07123/9223-0Telefax 07123/9223-50E-Mail: [email protected] Customer service: Rammax Maschinenbau Gmb...

Page 4 - LOMBARDINI; DUBLICATE; Year of; Type of machine; Identification of the machine

RX 1510-C/-I/-CI – 4 – LOMBARDINI LDW 1603/B2 K rpm 3064770 792006 2500 Type DUBLICATE LABEL 02 Made in Germany Typ/Gewicht Masch.Nr./Leistung Baujahr 72555 Metzingen Tel.07123/92230 - Fax07123/922350 Made in Germany Typ/Gewicht Masch.Nr./Leistung Baujahr 72555 Metzingen Tel.07123/92230 - Fax07123/9...

Page 5 - General information; Purpose of the operating instructions:

RX 1510-C/-I/-CI – 5 – General information The operating instructions are addressed to the machine operators. Detailed speciﬁcations on the necessary training and qualiﬁcation can be inferred from Chapter 2.4 Organisational/Personal Matters. The use of these operating instructions will: • Simplify t...

Page 6 - Structure of the documentation:; • The operating instructions contain:

RX 1510-C/-I/-CI – 6 – Operating and Maintenance Instructions Spare parts list Service and maintenance instructions Structure of the documentation: The machine documentation is divided into 3 individual document groups: • The operating instructions contain: All information necessary for operating th...

Page 7 - Important notes on the operating instructions:

RX 1510-C/-I/-CI – 7 – Chapter 1: • Description of the machine• Technical data • Features• Accessories Chapter 2: • General safety instructions• Danger area of the machine• Safety equipment • Required qualiﬁcations of the operators and of the service staff• Product speciﬁc and additional dangers• Sp...

Page 8 - Arial 14Pt Bold; Arial 12Pt Bold; Arial 10Pt Regular; Arial 10Pt Bold; Used font weights/typeface; User information; Pictogram

RX 1510-C/-I/-CI – 8 – Chapter heading: Arial 14Pt Bold Section heading: Arial 12Pt Bold Subsection: Arial 10Pt Bold Main text: Arial 10Pt Regular Marginal notes and cross references: Arial 10Pt Italic Passages to be observed: Arial 10Pt Bold Action steps for which a strict sequence must be observed...

Page 14 - Description of the machine; Orientation on the machine; Important notes on the machine

RX 1510-C/-I/-CI – 14 – Vorderwagen Right Left Front Rear Above Down Control unit / Cockpit Front car Drive unit Articulation Rear end Names of the most important assembly groups: 1. Description of the machine 1.1 Important notes on the machine 1.1.1 Orientation on the machine The most important are...

Page 17 - data; dimensions

RX 1510-C/-I/-CI – 17 – 850 377 45 428 600 1912 990 Ø525 1 160 30° 30° 55° 91° 1907 1524 7,5° 7,5° 7,5° 7,5° 1.2 Technical data 1.2.1 Main dimensions Speciﬁcations:

Page 18 - radius

RX 1510-C/-I/-CI – 18 – Ø 4,47 m Ø 2,76 m Ø 4,25 m Ø 2,98 m 30° 85 cm 63 cm 1.2.2 Turn radius Speciﬁcations:

Page 19 - Main dimensions; drum narrow; Driving characteristics:

RX 1510-C/-I/-CI – 19 – Main dimensions RX 1510 drum narrow drum wide Dimensions: Working width: mm 630 850 Overall width: mm 630 850 Overall length: mm 1912 Overall height: mm 1175 Distance between axles: mm 990 Drum diameter: mm 525 Weights: Operational weight: kg 1470 1530 Axle load front: kg 735...

Page 20 - Quantity; fluids

RX 1510-C/-I/-CI – 20 – Main dimensions RX 1510 drum narrow drum wide Gradeability w. / w/o. vibration: % 50/60 Turn radius inner: m 2,98 2,76 outer: m 4,25 4,47 Quantity Speciﬁcation Recommendation Fuels: Diesel fuel: l 23 Hydraulics: Hydraulic oil: l 43 DIN 51524-2 HLP 46 Fuchs Renolin B15 VG46 IS...

Page 21 - Noise emission specification:; - Sound pressure level at the operator station:; Technical modifications reserved

RX 1510-C/-I/-CI – 21 – Quantity Speciﬁcation Recommendation Use drinkable tap water for making the water/ethylene glycol mixture. Do not use rainwater or distilled water, since this can create foam. The water/ethylene glycol mixture should be used all year round in a concentration of at least 35% b...

Page 22 - Equipment of the machine; Variations of the machine/machine types; View of the operating unit from the worlplace.

RX 1510-C/-I/-CI – 22 – Start Stop Start Stop 1.4 Equipment of the machine 1.4.1 Variations of the machine/machine types View of the operating unit from the worlplace. RX 1510-C: Articulated trench roller with cable control. RX 1510-I: Articulated trench roller with infrared control. RX 1510-CI: Art...

Page 23 - plan; Position of the hoods and hatches; Operating panel

RX 1510-C/-I/-CI – 23 – 1.5 Stowage plan 15.1 Position of the hoods and hatches The machine is equipped with hoods and hinged components in order to be able to access all important parts. Operating panel Cockpit cover Radiator hatch Motor hood

Page 24 - instructions; Safety instructions

RX 1510-C/-I/-CI – 24 – 2. Safety instructions Safety instructions

Page 25 - Representation and meaning of the used safety instructions; RISK LEVEL

RX 1510-C/-I/-CI – 25 – 2.1 Representation and meaning of the used safety instructions 2.1.1 Situation-speciﬁc safety instructions Situation-speciﬁc safety instructions are safety instructions, which directly refer to the following activity or situation. They are represented as follows: DANGER indic...

Page 26 - Danger prevention measures; NOTE

RX 1510-C/-I/-CI – 26 – NOTE refers to situations, which can result in damages to property, describes the consequences, if these situations cannot be avoided and indicates possibilities to avoid the damages. Example safety instruction: Meaning: RISK LEVEL Nature and source of the dangerPossible cons...

Page 34 - Intended use/Product safety; Purpose of use of the machine; areas; equipment

RX 1510-C/-I/-CI – 34 – 2.2 Intended use/Product safety The vibration roller RX 1510 is built according to the state-of-the-art and the recognised safety-related regulations. Nevertheless the use can in danger life and health of the user or third parties and/or impair the machine and other material ...

Page 35 - Observing danger warnings on the machine

RX 1510-C/-I/-CI – 35 – GEFAHR V erbrühungsgefahr! Das Kühlwasser wird vom Motor sehr stark erhitzt und der Kühler unter Druck gesetzt. Beim Öffnen des Küh- lerdeckels entweicht der Druck plötzlich und das heiße Kühlwasser verursacht schwere V erbrühungen! ► Den Kühlerdeckel niemals bei laufendem Mo...

Page 36 - Use hearing protection.

RX 1510-C/-I/-CI – 36 – Use hearing protection. Safety instructions

Page 37 - Organisational, personal matters; out any activity on or with the machine.; dangers; operation

RX 1510-C/-I/-CI – 37 – 2.4 Organisational, personal matters • Machine operation is only admissible after proper instruction and in observance of this manual. • The safety regulations described in these safety regulations must be observed, likewise the guidelines of the Civil Engineering Professiona...

Page 38 - During maintenance work

RX 1510-C/-I/-CI – 38 – • The vibration function of the machine causes the soil in the area of the drum to vibrate considerably. Persons should not be exposed to these vibrations. • When applying the vibration function, loose material, such as stones and clumps 2.5.2 During maintenance work • The hy...

Page 39 - Emergency equipment

RX 1510-C/-I/-CI – 39 – 2.6 Additional dangers Using unexamined, not approved accessories can be dangerous for humans and machine. Only Rammax accessories and spare parts may be used for the machine. Risk of ﬁre and explosion when using solvent based cleaning agents. 2.7 Emergency measures If the ma...

Page 40 - Basic information on soil compaction; Construction and function

RX 1510-C/-I/-CI – 40 – 3. Construction and function 3.1 Introduction 3.1.1 Basic information on soil compaction Subsoil compaction is achieved by the constant effect of vertical impact forces. These are created by a rotating exciter shaft. The unequal weight distribution of the exciter shaft cross ...

Page 41 - Opening and closing of the hoods; Opening the cockpit hatch

RX 1510-C/-I/-CI – 41 – 3.3.2 Turning down the control unit A catch is located in the centre of the control unit. Unlock this catch. Pull the complete operating panel towards you. Make sure that the catch does not get caught in the locking element. 3.3.3 Opening and closing of the engine hood The en...

Page 42 - Unlocking and opening the radiator cap

RX 1510-C/-I/-CI – 42 – 3.3.4 Unlocking and opening the radiator cap The cooling system is very hot during operation of the machine. The radiator cap may only be opened when the engine has cooled down and is not in operation since there is otherwise the danger of touching parts of the cooling system...

Page 44 - Shut down yoke; Safety and monitoring equipment

RX 1510-C/-I/-CI – 44 – Start Stop min. 2 m 3.5 Safety and monitoring equipment 3.5.1 Shut down yoke The shutdown yoke is attached to the rear of the machine below the operating unit. At the rear end below the mounting of the shutdown yoke is a proximity switch. The shutdown yoke is activated and th...

Page 45 - indicator

RX 1510-C/-I/-CI – 45 – Start Stop max. 20 m 888888 888888 3.5.4 Inclination indicator The machine control is equipped with an inclination indicator. This triggers starting from an inclination angle of 45°. The engine switches itself off in this case automatically. The machine cannot be started as l...

Page 47 - Display and operating elements; Display and operating elements:

RX 1510-C/-I/-CI – 47 – 0 1 2 888888 Ignition „On” / Stand-by 1 Starting 2 Ignition „Off” 0 888888 Ignition lock Connection for cable manual control (only available for cockpit 3-68562 ► only RX 1510-C and RX 1510-CI) Display for: • Operating hours • Function code • Error code Warning light inclinat...

Page 48 - See page 84 Section 8.3 Checking engine; Contact the service workshop for other causes than lack of oil.; signals; • Charging control light:

RX 1510-C/-I/-CI – 48 – 888888 888888 • Coolant temperature warning lamp: Lights up, if the coolant temperature of the motor is too high. The stop sequence is activated after the LED has been illuminated for 4 seconds. The machine is shutdown. Possible cause: The cooling water level is possibly too ...

Page 49 - • Inclination indicator / Oil deficiency shutdown; elements; Function test of the display

RX 1510-C/-I/-CI – 49 – 888888 888888 888888 1 2 3 4 5 6 ▼▼▼▼▼▼ • Inclination indicator / Oil deﬁciency shutdown The machine control is equipped with an inclination indicator. This triggers starting from an inclination angle of 45°. The engine switches itself off in this case automatically. The mach...

Page 50 - Operating hour meter

RX 1510-C/-I/-CI – 50 – Display Meaning Lights up: F F: Stands for function • If an operator function is carried out. • Always in combination with a numerical value, which represents the function type. ( see page 52 Section 4.4.2 Function codes) I I: Stands for infrared transmitter. • The operator f...

Page 51 - Manual control device; Pos

RX 1510-C/-I/-CI – 51 – Start Stop 1 2 3 6 4 9 8 7 5 888888 1 2 3 4 5 6 ▼▼▼▼▼▼ 4.4 Operating elements Both infrared control and cable control is available for the machine. According to the machine version it is equipped with one or both of these control methods. Retroﬁtting one of these control meth...

Page 52 - Code; Function codes during operation with cable control

RX 1510-C/-I/-CI – 52 – Start Stop 100 1000 2000 10 4100 ► 4400 200 4010 20 1 Function key vibration forward, vibration backwards and fast gear in active condition Code number Meaning 1 Fast gear on/off 10 Driving forward 100 Steering angle left 1000 large amplitude 20 Driving backwards 200 Steering...

Page 53 - Cockpit display with cable control; Start / Stop function; Control mode

RX 1510-C/-I/-CI – 53 – Start Stop FH I I00 100 1000 Example display function: • F H 1100 Driving left forward with vibration forward 4.4.3 Cockpit display with cable control Start / Stop function Control mode Code number: Meaning: F H 4010 "Start" key is activated. ► Starting procedure is i...

Page 54 - Vibration functions; Driving functions; Display

RX 1510-C/-I/-CI – 54 – Vibration functions Display Executed functions F H 1000 Vibration forward F H 1010 Vibration forward Driving right forward F H 1020 Vibration forward Driving right backward F H 1100 Vibration forward Driving left forward F H 1110 Vibration forward Driving left forward right f...

Page 55 - transmitter

RX 1510-C/-I/-CI – 55 – 1 2 3 6 4 9 8 7 5 N SI 4.4.4 Infrared transmitter The infrared control is used to operate the machine with infrared control. Solar cells supply the electrical current. Therefore, no batteries are required to operate the infrared transmitter. The infrared transmitter is equipp...

Page 56 - Function codes during operation with infrared control

RX 1510-C/-I/-CI – 56 – F I I I00 100 1000 2000 10 4100 ► 4400 200 4010 20 1 N 100 1000 N Example display function: • F I 1100 Driving left forward with vibration forward Code Meaning 1 Fast gear on/off 10 Drums right forward 100 Drums left forward 1000 Vibration forward 20 Drums right backward 200 ...

Page 57 - Cockpit display with infrared control; Characteristic

RX 1510-C/-I/-CI – 57 – Driving functions Display Executed functions F I 0010 Driving Right forward F I 0011 Driving Right forward High speed F I 0020 Driving Right backward F I 0021 Driving Right backward High speed F I 0100 Driving Left forward F I 0101 Driving Left forward High speed F I 0110 Dri...

Page 59 - Checking hydraulic oil level

RX 1510-C/-I/-CI – 59 – S 5. Start-up 5.1 Safety instructions Only qualiﬁed and appropriately trained specialised personnel, with a minimum age of 18 years, may operate the machine. Persons acting under the inﬂuence of drugs, medicines or alcohol may not operate the machine. 5.2 Examination before s...

Page 60 - Checking engine oil level; Refilling hydraulic oil:

RX 1510-C/-I/-CI – 60 – OS HD 5.2.2 Checking engine oil level OS The dipstick is located on the right side of the engine underneath the cooling water tank. The engine has been ﬁlled in the factory with engine oil, viscosity class 15W40. If there is the need to change to a different viscosity class (...

Page 61 - CAUTION; Checking cooling water level; DANGER

RX 1510-C/-I/-CI – 61 – CAUTION Danger of burning!The engine and its detachable parts are hot during and immediately after operation.Before touching the engine or the detachable parts ﬁrst allow these to cool down. 5.2.3 Checking cooling water level Work may only be carried out on the cooling system...

Page 62 - Checking the contamination degree of the air filter; see page 20 Subsection 1.2.3 Operating fluids

RX 1510-C/-I/-CI – 62 – NOTE Be careful not to damage the air ﬁlter by inappropriate cleaning!Damaged air ﬁlters can damage the engine.Do not clean air ﬁlters with compressed air, do not wash, only tap! 1) Open the engine hood.2) Loosen fastening clamps on the air ﬁlter cover.3) Remove air ﬁlter and...

Page 63 - Checking fuel level / Tanking fuel; WARNING; ENVIRONMENT; The operating panel must be folded back, in order to refuel.; ) Close the tank lid after the fuelling procedure.; Adjusting address to transmit transmitter signals

RX 1510-C/-I/-CI – 63 – KA TD 5.2.5 Checking fuel level / Tanking fuel KA The sight glass for the examination of the fuel level is located under the operating panel. WARNING Fire danger!Fuels are extremely ﬂammable.► Do not smoke during refuelling.► Keep naked ﬂames and sparks away.► Never operate t...

Page 64 - from the machine controller with a screwdriver; Setting the transmitter address on the infrared control:

RX 1510-C/-I/-CI – 64 – SI SM NOTE The addresses at the transmitter and receiver must correspond.Transmitter and receiver are factory set to address 5. (only for machines with infrared control)Setting the transmitter address on the machine controller: 1) Fold the operating panel back. 2) Remove the ...

Page 65 - Starting the machine; Switching ignition on; Display test

RX 1510-C/-I/-CI – 65 – 888888 1 S .--05 0.0 5.3 Starting the machine The machine only reacts to the control mode with which your engine was started. The machine only reacts to control impulses of the manual control, if the engine has been started with the manual control. The machine only reacts to ...

Page 66 - mode; Starting the machine at the ignition lock; Starting procedure

RX 1510-C/-I/-CI – 66 – . F 40 I0 2 5.3.2 Stand-by mode The machine reverts to the standby mode, if it is not started within 30 seconds. The machine can nevertheless be started in this state with one of the control modes or with the ignition key. Stand-by : No display active. Only the decimal point ...

Page 67 - After engine start-up; Starting the machine with the manual control device

RX 1510-C/-I/-CI – 67 – F 4020 1 FH 40 I0 Start Stop After engine start-up Code „F 4020” lights up: The motor has started.► Release ignition key. The ignition key returns automatically to „Ignition position 1”. NOTE The ignition start switch has a starter anti-repeat function. The starter is not act...

Page 68 - Code „FH 4020” lights up: The motor has started.; Starting the machine with the infrared control.

RX 1510-C/-I/-CI – 68 – FH 4020 NOTE The ignition start switch has a starter anti-repeat function. The starter is not activated anymore, if the engine is running.► At the most 15 seconds continuous starting and in between breaks of approx. 1 minute. ► Identify and repair cause of malfunction (malfun...

Page 70 - Switching machine off; Switching the machine off at the ignition lock; Stop procedure

RX 1510-C/-I/-CI – 70 – F 4200 F 4 I00 0 F 4300 5.4 Switching machine off 5.4.1 Switching the machine off at the ignition lock ► Turn the ignition key to position "0". The following code is displayed: „F 4100”. The LEDS for generator and oil pressure drop are active. The stop procedure is in...

Page 71 - and from the oil pressure sensor.; Switching the machine off with the manual control device; pressure drop are active. The stop procedure is initiated.

RX 1510-C/-I/-CI – 71 – Start Stop FH 4 I00 FH 4200 FH 4300 ► Code „FH 4200” is displayed, if no further signal is received from the generator and from the oil pressure sensor. ► End of the stop procedure. „FH 4300” is displayed. The operating hour meter is secured. The machine shuts down. Restartin...

Page 72 - Switching the machine off with the infrared control device; breaks and after finishing work.

RX 1510-C/-I/-CI – 72 – F I 4 I00 F I 4200 5.4.3 Switching the machine off with the infrared control device ► Move the toggle switch "Start-Stop" on the infrared control from the switch position "Neutral" to the right to switch position "Stop". ► The following code is display...

Page 73 - Using the machine; Display and control elements

RX 1510-C/-I/-CI – 73 – F I 4300 6. Using the machine 6.1 Safety instructions 6.1.1 General • Only qualiﬁed and appropriately trained specialised personnel, with a minimum age of 18 years, may operate the machine. • Persons acting under the inﬂuence of drugs, medicines or alcohol may not operate the...

Page 74 - Before operating the machine; overcome larger distances, if the terrain enables this.

RX 1510-C/-I/-CI – 74 – F 40 I0 Start Stop Start Stop 6.1.2 Before operating the machine Make sure that: • The ﬁll levels of the operating ﬂuids, hydraulic oil, coolant and engine oil are at a sufﬁcient level. • All safety equipment is working.• All control elements and display elements are working....

Page 75 - it is not an obstacle.

RX 1510-C/-I/-CI – 75 – Start Stop F 4 I00 Start Stop Start Stop 3) Depending upon required compaction force, switch the large or small vibration on. 4) Drive over the area to be compacted several times, until it is completely compacted. 5) After completing the compaction work drive the machine to a...

Page 76 - Parking the machine

RX 1510-C/-I/-CI – 76 – 6.2 Parking the machine If possible, park the machine on a level ground. Parked machines which could represent an obstruction must be safeguarded by clearly identiﬁable measures. WARNING Safeguard the machine before leaving against use by unauthorised persons.► Withdraw ignit...

Page 77 - Loading the machine with a loading ramp; Loading the machine with hoisting gear; Loading and transporting the machine

RX 1510-C/-I/-CI – 77 – 7. Loading and transporting the machine 7.1 Safety instructions 7.1.1 General • Only qualiﬁed and appropriately trained specialised personnel, with a minimum age of 18 years, may participate in loading the machine. • Persons acting under the inﬂuence of drugs, medicines or al...

Page 78 - Using the transport protection

RX 1510-C/-I/-CI – 78 – K BL T S K T S 7.2 Using the transport protection 1) Straighten the articulated steering of the machine. ► The transport lock cannot be applied, if the machine has not been aligned straight. 2) Loosen K knurled screw. 3) Withdraw S split pin 4) T Fold out transport protection...

Page 79 - Danger; Loading the machine with ramps

RX 1510-C/-I/-CI – 79 – 50% max. 7.4 Loading the machine with hoisting gear The transport protection must be applied before loading with hoisting gear. Only hoisting gear with a carrying capacity of at least 2000 kg may be used to load the machine. The machine may only be lifted at the intended tran...

Page 80 - Securing the machine for transport; Transport position

RX 1510-C/-I/-CI – 80 – UK S S TÖ TÖ UK SB 1) Check whether the transport protection is applied. ► If not, apply the transport protection. 2) Check whether the shutdown yoke is in the transport position (activated). ► If the shutdown yoke is not in the transport position, then press it downwards to ...

Page 81 - fuel; Do not inhale fuel vapours.; Working on the engine; cover with insulating materials.; Maintaining the machine

RX 1510-C/-I/-CI – 81 – 8. Maintaining the machine 8.1 Safety instructions 8.1.1 General • Maintenance work may only be performed by suitably qualiﬁed and trained personnel. • Keep unauthorised persons away from the machine.• Never carry out maintenance work on a moving machine or with the engine ru...

Page 86 - Exchanging engine oil; on the oil drain line; of at least 4 litres and be undamaged.; ) Allow oil circuit to drain completely.

RX 1510-C/-I/-CI – 86 – AS A 8.4 Exchanging engine oil Risk of scalding!Hot engine oil can cause severely scald the skin at contact.► Wear suitable protective clothing. WARNING NOTE Only drain engine oil from a warm engine.Never start the engine without engine oil. The engine oil must be exchanged a...

Page 87 - environmentally friendly manner!; onto the oil drain line again and secure with the; with retaining clip

RX 1510-C/-I/-CI – 87 – OF C B AS 7) Unscrew OF oil ﬁlter. Leaking lubricating oils pollute the soil!► Collect leaking engine oil and dispose together with the oil ﬁlter in an environmentally friendly manner! ► Do not spill engine oil. ► Collect leaking fuel, do not let it seep into the ground. ENVI...

Page 88 - Changing the fuel filter; The fuel system is self-priming. The fuel filter; must be exchanged at least

RX 1510-C/-I/-CI – 88 – NOTE Be careful not to damage the air ﬁlter by inappropriate cleaning!Damaged air ﬁlters can damage the engine.Do not clean air ﬁlters with compressed air, do not wash, only tap! 2) Loosen fastening clamps on the air ﬁlter cover.3) Remove air ﬁlter and check for the degree of...

Page 89 - Emptying the fuel tank

RX 1510-C/-I/-CI – 89 – DF AS A 1) Loosen hexagonal bolt S on the ﬁlter holder and remove the fuel ﬁlter DF . 2) DF Take off fuel hoses and insert new fuel ﬁlter. Exchange fuel hoses, which are leaking or porous. 3) DF Mount the fuel ﬁlter in reverse order and check for leaks. 8.7 Emptying the fuel ...

Page 90 - manner together with the fuel filter!

RX 1510-C/-I/-CI – 90 – S HD 8.8 Checking hydraulic oil level The sight glass for the examination of the hydraulic oil level is located under the operating panel. The ﬁll level should be within the sight glass. NOTE If it is determined during the daily oil level check that hydraulic oil is missing, ...

Page 91 - for draining; Hydraulic oil change/ Hydraulic filter change; should be replaced after each

RX 1510-C/-I/-CI – 91 – S S Risk of scalding!Hot hydraulic oil can severely scald the skin at contact.► Allow machine to cool down before draining the hydraulic oil. WARNING 1) Park the machine on ﬂat ground.2) Depressurise the hydraulic system.3) A threaded plug is located on the right outer side o...

Page 92 - an environmentally friendly manner!

RX 1510-C/-I/-CI – 92 – RF SF V Leaking hydraulic oils pollute the soil!► Collect leaking hydraulic oil and dispose together with the hydraulic oil ﬁlter in an environmentally friendly manner! ► Do not spill hydraulic oil. ► Collect leaking hydraulic oil, do not let it seep into the ground. ENVIRONM...

Page 94 - Draining /refilling cooling water; on the cooling water drain line; a capacity of at least 4 litres and be undamaged.

RX 1510-C/-I/-CI – 94 – KS A KS C B 8.11 Draining /reﬁlling cooling water DANGER Risk of scalding!The engine extremely heats up the cooling water. The coolant circuit is under pressure.When opening the coolant circuit the pressure can escape suddenly and the hot cooling water can cause severe scaldi...

Page 95 - drums; ) Insert the hooks of the hoisting gear into the transport handle.; ) Release fastening bolts

RX 1510-C/-I/-CI – 95 – KS A BS 8.12 Exchanging drums The machine must be lifted with appropriate hoisting gear, in order to change the drums. The hoisting gear must have sufﬁcient carrying capacity. The machine may only be lifted at the intended transport handles TB . 1) Attach transport protection...

Page 96 - stripper; ) Loosen all three screws on the stripper; and push stripper toward the drum.; The strippers must be reset or renewed in case of wear.; Servicing the battery

RX 1510-C/-I/-CI – 96 – AS AS 8.13 Adjusting stripper 1) Loosen all three screws on the stripper AS and push stripper toward the drum. ► The distance from stripper to drum must be at least 2 cm. 2) Tighten bolts again. NOTE The strippers must be reset or renewed in case of wear. 8.14 Servicing the b...

Page 97 - Do not let acid get on to hands or clothes.

RX 1510-C/-I/-CI – 97 – Ba tte rie , rü tte lfe st Ba tte ry, vi br at ion pr oo f Batt er ie, p ro tég é de vibra tion 3-5066 6 3- 39 882 3-50667 Ba tter ie, rü ttelfe st: Ers atz teilnumme r: Bat ter y, vibra tio n proof : Pa rts numb er : Batterie, protég é d e vib rat ion : Nu m éro de pi èce: 3...

Page 98 - Tightening torques for bolts with standard metric thread; Self-locking nuts must be renewed after dismantling!; Tightening torques

RX 1510-C/-I/-CI – 98 – 9.0 Tightening torques : Tightening torques for bolts with standard metric thread Bolt dimension Tightening torques Nm 8.8 10.9 12.9 M 4 3 5 5 M 5 6 9 10 M 6 10 15 18 M 8 25 35 45 M10 50 75 83 M12 88 123 147 M14 137 196 235 M16 211 300 358 M18 290 412 490 M20 412 578 696 M22 ...

Page 99 - Troubleshooting table

RX 1510-C/-I/-CI – 99 – 10.0 Troubleshooting table Fault: Possible cause: Remedy: Engine running, machine does not move! Insufﬁcient hydraulic oil in the hydraulic oil tank. • Check hydraulic oil level • Check the hydraulic system for leaks Engine does not start! Too little fuel in the fuel tank. • ...

Page 100 - Error codes and meanings; Safety opening is actuated.

RX 1510-C/-I/-CI – 100 – RammaxMaschinenbau GmbHGutenbergstraße 3372555 MetzingenGermany Printed in Germany Tel: ++49 (0) 7123 / 9223-0 Fax: ++49 (0) 7123 / 9223-50 E-Mail: [email protected] www.Rammax.de Technical modiﬁcations reserved Valid starting from machine number: 4638466 Error codes and mea...

Page 101 - OperatiOn Manual; Your Local Dealer is:; HERE’S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL; UNITED STATES; Dukinfi eld, Cheshire SK16 4UJ; CANADA

OperatiOn Manual Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2010, MULTIQUIP INC. Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission...