Page 3 - To find the latest revision of this; HERE'S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 3 © COPYRIGHT 2004, Multiquip INC. Multiquip Inc, the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without writtenpermission. All other trademarks are the property of their...
Page 4 - QP-2TZ — TABLE OF CONTENTS; Hatz 1B20 Diesel Engine; Terms and Condition Of Sale
PAGE 4 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) Specification and part number are subject to change without notice . NOTE MQ QP-2TZ Trash Pump Here’s How To Get Help ............................................ 3Table of Contents .........................................
Page 5 - PARTS ORDERING PROCEDURES; please supply the following information:; Direct TOLL-FREE access; Place Your Parts Order Via Web or Fax
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 5 PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ Dealer account number ❒ ❒ ❒ ❒ ❒ Dealer name and address ❒ ❒ ❒ ❒ ❒ Shipping address (if different than billing address) ❒ ❒ ...
Page 6 - QP-2TZ — SAFETY MESSAGE ALERT SYMBOLS
PAGE 6 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) QP-2TZ — SAFETY MESSAGE ALERT SYMBOLS Safety precautions should be followed at all times when operatingthis equipment. Failure to read and understand the SafetyMessages and Operating Instructions could result in injury t...
Page 7 - Accidental Starting; QP-2TZ — SAFETY MESSAGE ALERT SYMBOLS; Respiratory Hazard; Equipment Damage Messages; Sight and Hearing hazard
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 7 Accidental Starting QP-2TZ — SAFETY MESSAGE ALERT SYMBOLS ALWAYS place the engine ON/OFF switch in the OFF position when the pump is not in use. Respiratory Hazard A LWAY S w e a r a p p r o ve d r e s p i r a t o r y pro...
Page 8 - RULES FOR SAFE OPERATION; DANGER
PAGE 8 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) RULES FOR SAFE OPERATION ■ ALWAYS refuel in a well-ventilated area, away from sparks and open flames. ■ ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool...
Page 9 - Maintenance Safety
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 9 ■ High Temperatures – Always stop engine and allow the engine to cool before adding fuel, oil or performing serviceand maintenance functions. Contact with hot components can cause serious burns. ■ NEVER disconnect any ...
Page 11 - il; li
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 11 QP-2TZ — SPECIFICATIONS (ENGINE) 23.3 FT. 16.7 FT. 10.0 FT. 3.3 FT. 100 110 9080706050 40 3020 10 0 0 50 100 150 200 US GALLONS PER MINUTE TOTAL HEAD FT. 1.6 FT. ) 0 2 B 1 Z T A H ( s n o i t a c i f i c e p S e n i g n ...
Page 12 - QP-2TZ — GENERAL INFORMATION
PAGE 12 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) QP-2TZ — GENERAL INFORMATION APPLICATION The QP-2TZ Trash Pump is designed to be used for dewatering applications. Both the suction and discharge ports on theQP-2TZ trash pump use a 2-inch diameter opening, whichallows ...
Page 13 - QP-2TZ — PUMP COMPONENTS
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 13 Figure 2 shows a typical application using the QP-2TZ Trash pump. Please note that this pump is intended for the removal of cleanwater and water containing some debris and solids. Maximum size of solids should not exceed...
Page 15 - QP-2TZ — BASIC ENGINE; WARNING
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 15 QP-2TZ — BASIC ENGINE Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication andfilled with fuel prior to operation. Refer to the manufacturer’s Enginemanu...
Page 17 - must
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 17 Before Starting 1. Read safety instructions at thebeginning of manual. 2. Place pump as near to water as possible, on a firm flat, level surface. 3. To prime pump, remove fill cap (Figure 2) and fill pump casing with wat...
Page 23 - QP-2TZ — PREPARATION FOR LONG -TERM STORAGE; Pump Storage; DO; STOP
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 23 QP-2TZ — PREPARATION FOR LONG -TERM STORAGE Pump Storage For storage of the pump for over 30 days, the following isrequired: z Drain the fuel tank completely. z Run the engine for about 3 minutes and then stop . z Stop t...
Page 26 - Items Found In the “Remarks” Column; QP-2TZ — EXPLANATION OF CODE IN REMARKS COLUMN
PAGE 26 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) How to read the marks and remarks used in this partsbook. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serialnumber range (inclusive) where a particular part is used. Model Number...
Page 27 - QP-2TZ — SUGGESTED SPARE PARTS
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 27 QP-2TZ — SUGGESTED SPARE PARTS QP-2TZ TRASH PUMP 1 TO 3 UNITSW/ HATZ IB20 Qty. P/N Description 2 ............ KIT2T .................... KIT, MECHANICAL SEAL, O-RINGS1 ............ 2257040030 .......... IMPELLER2 ..........
Page 31 - PART NAME
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 31 QP-2TZ — PUMP ASSY. 38 0151191250 STUD BOLT (DRAIN COVER HANDLE), 4 M12 X 50 X15 X 20 39 0520030413 KEY, 4.7 X 16 1 40 43592012400011 IMPELLER WASHER, 35 X 9 T4.5 1 41 0204490060 U-NUT (WEAR PLATE, M6 3 42 0205490080 NUT...
Page 32 - HATZ 1B20 — SPARE PARTS KIT ASSY.
PAGE 32 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — SPARE PARTS KIT ASSY. SPARE PARTS KITS ASSY.
Page 34 - HATZ 1B20 — ACCESSORIES ASSY.
PAGE 34 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — ACCESSORIES ASSY. ACCESSORIES ASSY.
Page 36 - HATZ 1B20 — CRANKCASE AND ENGINE MOUNT ASSY.; Refer to Table 9 at the end of the manual for
PAGE 36 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — CRANKCASE AND ENGINE MOUNT ASSY. CRANKCASE AND ENGINE MOUNT ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs.
Page 38 - HATZ 1B20 — CRANKSHAFT ASSY.
PAGE 38 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — CRANKSHAFT ASSY. CRANKSHAFT ASSY.
Page 40 - HATZ 1B20 — CAMSHAFT ASSY.
PAGE 40 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — CAMSHAFT ASSY. CAMSHAFT ASSY.
Page 42 - HATZ 1B20 — PISTON ASSY.
PAGE 42 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — PISTON ASSY. PISTON ASSY.
Page 43 - HATZ 1B20 — PISTON ASSY
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 43 HATZ 1B20 — PISTON ASSY . PISTON ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 01317100 PISTON 69MM ASSY. ................................. 1 .............. INCLUDES ITEMS W/ * 2 * % PISTON 69MM ..............................
Page 44 - HATZ 1B20 — CYLINDER HEAD ASSY.
PAGE 44 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY.
Page 50 - HATZ 1B20 — TIMING COVER ASSY.
PAGE 50 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — TIMING COVER ASSY. TIMING COVER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs.
Page 52 - HATZ 1B20 — FLYWHEEL ASSY.
PAGE 52 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — FLYWHEEL ASSY. FLYWHEEL ASSY.
Page 54 - HATZ 1B20 — FUEL INJECTION ASSY.
PAGE 54 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — FUEL INJECTION ASSY. FUEL INJECTION ASSY.
Page 58 - HATZ 1B20 — RECOIL STARTER ASSY.
PAGE 58 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs.
Page 60 - HATZ 1B20 — AIR DUCT ASSY.
PAGE 60 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — AIR DUCT ASSY. AIR DUCT ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs.
Page 61 - HATZ 1B20 — AIR DUCT ASSY
QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) — PAGE 61 HATZ 1B20 — AIR DUCT ASSY . AIR DUCT ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 01533504 HOOD 1 2 01316800 BLOWER DUCTING 1 3 50170900 SPRING WASHER 6 7 4 50146300 HEX SCREW M6X18 1 5 50461700 RUBBER SLEEVE 2 6 50144400...
Page 64 - HATZ 1B20 — CRANKCASE BREATHER ASSY.
PAGE 64 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — CRANKCASE BREATHER ASSY. CRANKCASE BREATHER ASSY.
Page 66 - HATZ 1B20 — FUEL TANK ASSY.
PAGE 66 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — FUEL TANK ASSY. FUEL TANK ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs.
Page 68 - HATZ 1B20 — AIR FILTER ASSY.
PAGE 68 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — AIR FILTER ASSY. AIR FILTER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs.
Page 70 - HATZ 1B20 — MUFFLER ASSY.
PAGE 70 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — MUFFLER ASSY. MUFFLER ASSY.
Page 72 - HATZ 1B20 — SEALING AND BONDING ADHESIVES
PAGE 72 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (03/25/05) HATZ 1B20 — SEALING AND BONDING ADHESIVES S E V I S E H D A G N I D N O B D N A G N I L A E S . 9 E L B A T m e t I r e b m u N t r a P n o i t p i r c s e D t n u o m A A 1 0 0 3 2 2 0 5 r o t a v it c A e ti t c o L l...
Page 74 - OPERATION AND PARTS MANUAL
OPERATION AND PARTS MANUAL MULTIQUIP INC..... 18910 WILMINGTON AVE.CARSON, CALIFORNIA 90746800-421-1244 • 310-537-3700FAX: 310-537-3927E-mail:[email protected]:multiquip.com Your Local Dealer is: HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP COR...