Multi-Tech Systems MTD-EV3 - Manuals

PRODUCT OVERVIEW Link Status Description On Continuously lit Powered on. Slow blink (-0.2Hz) Registered on network. Turning the Device On or Off This USB-powered device does not have a power button. Connecting the device to a computer's USB port turns iton. Disconnecting it or shutting off the compu...

SAFETY NOTICES AND WARNINGS Safety Notices and Warnings General Safety The modem is designed for and intended to be used in fixed and mobile applications. Fixed means the device isphysically secured at one location and cannot be easily moved to another location. Mobile means the device isused in oth...

SAFETY NOTICES AND WARNINGS non-respect de cette restriction peut entraîner la suspension ou le refus des services cellulaires aucontrevenant, une action en justice, ou les deux. ■ Éteignez votre appareil sans fil lorsque autour de l'essence ou pompes diesel-carburant et avant de remplirvotre véhicu...

SAFETY NOTICES AND WARNINGS User Responsibility Respect all local regulations for operating your wireless device. Use the security features to block unauthorized useand theft. 10 QuickCarrier TM USB-D EV-DO MTD-EV3 User Guide

ACTIVATION AND CARRIER SPECIFIC INFORMATION Activation and Carrier Specific Information Account Activation for Cellular Devices Some Multi-Tech cellular modems are pre-configured to operate on a specific cellular network, such as Sprint orVerizon Wireless. Before you can use the modem, you must set ...

USING LINUX Using Linux Shell Commands Testing Serial Ports To test the serial ports created by the driver, type in a shell: cat /dev/ttyUSBx &# echo –en "ATE0\r" > /dev/ttyUSBx# echo –en "AT\r" > /dev/ttyUSBx Note: Sending ATE0 is required, to avoid issues in the terminal ...

BASIC OPERATIONS Basic Operations Interacting with Your Device Overview This section describes how to use AT commands to interact with your device. Using terminal software such asKermit, you can issue AT commands to communicate with and configure your modem. The AT commands let youestablish, read an...

BASIC OPERATIONS ■ Data bits: 8 ■ Parity: none ■ Stop bit: 1 ■ Flow control: hardware To confirm you are communicating with the device: ■ Type AT and press Enter . If the device responds with OK, you are communicating with the device. Verifying Signal Strength To verify the device signal strength, e...

BASIC OPERATIONS Note: Signal strength of 10 or higher is needed for successful packet data sessions. Example A example response to AT+CSQ: +CSQ: 15,1 Checking Network Registration Before establishing a packet data connection, verify the is device registered on the network. To do this enter thenetwo...

BASIC OPERATIONS Enter:AT+CMGS="##########" >Your message here where ########## is the recipient's number. 3. Send the message. Enter CTRL+Z.The device responds:+CMGS: 255OK For example: AT+CMGF=1OKAT+CMGS="6155554563"> How are you? <CTRL+Z to send> +CMGS: 255OK Deleting ...

REGULATORY STATEMENTS Regulatory Statements 47 CFR Part 15 Regulation Class B Devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter...

REGULATORY STATEMENTS Council Directive 2004/108/EC of 15 December 2004 on the approximation of the laws of Member Statesrelating to electromagnetic compatibility;andCouncil Directive 2006/95/EC of 12 December 2006 on the harmonization of the laws of Member Statesrelating to electrical equipment des...

ENVIRONMENTAL NOTICES Environmental Notices Waste Electrical and Electronic Equipment Statement WEEE Directive The WEEE Directive places an obligation on EU-based manufacturers, distributors, retailers, and importers to take-back electronics products at the end of their useful life. A sister directi...

ENVIRONMENTAL NOTICES Restriction of the Use of Hazardous Substances (RoHS) Multi-Tech Systems, Inc Certificate of Compliance 2011/65/EU Multi-Tech Systems confirms that its embedded products comply with the chemical concentration limitations setforth in the directive 2011/65/EU of the European Parl...

ENVIRONMENTAL NOTICES REACH Statement Registration of Substances After careful review of the legislation and specifically the definition of an “article” as defined in EC Regulation1907/2006, Title II, Chapter 1, Article 7.1(a)(b), it is our current view Multi-Tech Systems, Inc. products would becons...

ENVIRONMENTAL NOTICES Information on HS/TS Substances According to Chinese Standards In accordance with China's Administrative Measures on the Control of Pollution Caused by Electronic InformationProducts (EIP) # 39, also known as China RoHS, the following information is provided regarding the names...

INDEX Index A L account activation.........................................................11 LEDs .................................................................................6 activation link status ........................................................................6 cellular devices........