Multi-Tech Systems MT5600BA - Manuals

MultiModemII Quick Start Guide 1 Introduction Congratulations on your purchase of the MultiModemII mo-dem. You have acquired one of the finest data/fax dialup andleased line modems available today from one of the world’soldest modem manufacturers: Multitech Systems, Inc. This Quick Start Guide will ...

MultiModemII Quick Start Guide 2 What You Will Need In addition to the contents of the MultiModemII package, youwill need the following items: 4 A computer with an unused serial port 4 A shielded RS-232 serial cable with a male DB-25 connec-tor on one end and a connector to match your computer’sseri...

MultiModemII Quick Start Guide 3 Step 1: Connect the Modem to Your System Turn off your computer. Placing the modem in a convenientlocation, connect it to your computer’s serial port, to the tele-phone line, to your leased line, to AC power, and, optionally, toyour telephone. VOLUME EIA RS232C LEASE...

MultiModemII Quick Start Guide 4 Dialup Connection Plug one end of the modular phone cable into the modem’sLINE jack, and the other end into a public switched telephonenetwork (PSTN) wall jack. Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into the LINE jack o...

MultiModemII Quick Start Guide 5 Power Connection Plug the transformer module into an AC power outlet or powerstrip. Plug the transformer module’s cable into the POWERjack on the modem. Note: Use only the transformer module supplied with the modem. Use of any other module voids the warranty and cand...

MultiModemII Quick Start Guide 6 2. In the Install New Modem wizard, select Don’t detect my modem; I will select it from a list , and then click Next . A dialog box with a list of manufacturers and a list of modemmodels appears. 3. Insert the installation CD into your CD-ROM drive, and then click Ha...

MultiModemII Quick Start Guide 7 3. Choose your modem from the software’s modem list. If it isn’t listed, choose a generic modem and modify the set-tings as necessary. 4. Change the modem initialization string, if necessary. The factory default configuration works well for most purpos-es. To load th...

MultiModemII Quick Start Guide 8 7. If the software has an autobaud selection, make sure it is disabled. Autobaud applies only to older modems, and cancause problems if enabled. 8. If the software allows you to edit the no-connect messages ( NO CARRIER, BUSY, NO ANSWER, NO DIALTONE ), make sure ther...