MSI MS-7097- Manuals

Page 3 - Preface

Preface Notice The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice. Note: Formosa21 will not be obligated to the responsibility outside the scope of VPON D...

Page 4 - Table of Contents; About the GUI Introduction

1 Table of Contents 1. Introduction 1.1 Features----------------------------------------------------------------------------------------------------2 1.2 Product Specifications ----------------------------------------------------------------------------------------3 2. Getting started 2.1 Summary of...

Page 5 - Introduction; Figure1.1 VPON Network Configuration; Video & audio live surveillance; Adjustable recording quality for each camera.

2 1. Introduction A VP-100 package includes one VP-40 video capture card and a DVR on chip DOM. VP-40 supports 4 camera input ports. After install them in a PC, it becomes a dedicated DVR system after power up. The DVR System is a high performance digital video recorder with built-in mini web server...

Page 7 - Getting Started; Summary of the installing

4 2. Getting Started 2.1 Summary of the installing Before install VP-100 to your PC platform, please make sure the PC’s Hardware is compatible with the motherboards, which we have recommended in the appendix. VP-100 contains : 2.2 Installation Step 1 : Installing Motherboard We recommend motherboard...

Page 8 - capture cards are in the PCI slots.; Step 6: Installing the hard drives; drive size supported is 500GB each. For a total of 1TB.

5 Step 5: Installing VP-40 Capture Card Our capture card is proprietary and will only work with our DVR chip. Install the capture card into an available PCI slot. Once the system boots the VPON firmware will automatically detect how many capture cards are in the PCI slots. Step 6: Installing the har...

Page 11 - camera PTZ control. Please refer to following connection diagram.; Specifications; Setup COM port to PTZ control in the system setup manual.; RS-485 converter to control PTZ structure

8 3. VP-SI/O PCI Card Specification and Installation (Optional) VP-SI/O PCI Card: The VP-SI/O card has default 4 digital inputs and outputs. It can be expanded to 16 digital inputs and outputs by adding extra daughter boards. VP-SI/O PCI CARD also has a built-in RS-485 converter for camera PTZ contr...

Page 13 - Graphic User Interface (GUI); Local surveillance GUI:; Setup Video Quality; Color

10 5. Graphic User Interface (GUI) 5.1 Introduction VP-100 can be configured using either the supplied remote control unit (or a keyboard) or a mouse. This chapter covers mouse operation. The VP-100 must be in GUI mode for mouse operation. Under GUI mode, keyboard is used ONLY for data entry. Local ...

Page 14 - PTZ Control; PTZ panel

11 5.3 PTZ Control PTZ panel After setting PTZ in the camera setup section , user can use the PTZ panel to control PTZ (Pan, Tilt, Zoom) cameras. This panel is displayed when change to single screen. PTZ panel: You can do preset and recall, zoom in/out, focus, iris control to current camera. Preset ...

Page 16 - IR Remote Control Operation; How to playback recorded Video/Audio files

13 6. IR Remote Control Operation 6.1 How to playback recorded Video/Audio files 1. Press Menu key on remote controller and then use Up/Down move to playback and press “OK” to bring up playback list as below: Access any of these files by pressing the right arrow button. 2. The alarm condition, which...

Page 19 - Appendix A: Recommendation Motherboard; Suggesting CPU model

I Appendix A: Recommendation Motherboard We have tested some different motherboards for VP-100. If You are first time to plug and play VP-100.We suggest you to choose the motherboard which have been tested by us for better performers 。 Suggesting CPU model ： Pentium 4, 1.6G or better Motherboard ： 1...

Page 20 - Appendix B: Operation via local keyboard; Esc

II Appendix B: Operation via local keyboard To get VP-100 up and running via local keyboard, a keyboard is required. The interface of VP-100 operation is as following figure. 1. Esc: Cancel Provide cancel and close function. When pressing “ Esc ”, it will close current setting menu and returns to th...

Page 21 - Enter

III 9. F8: Speed (switch playing speed) When pressing “ F8 ”, users can switch the playing speed. 10. F9: (Seek Backward) When pressing “ F9 ”, users can backward seek the video. 11. F10: (Step Backward) When pressing “ F10 ”, users can backward the video frame step-by-step. 12. F11: (Step Forward) ...

Page 24 - Appendix D: Watch-dog Wiring Description; Hardware Request list:

VI Appendix D: Watch-dog Wiring Description Watch dog is a hardware device to monitor the system status. If the system fails to response, Watch dog will send a rest signal to the motherboard to reboot the system. To enable Watch dog function, please select available durations 10,9,8…..seconds. Hardw...