Mitsubishi Electric XD3200U - Manuals

Page 2 - Preparation before using the network function

EN-2 Preparation/SetUp Preparation before using the network function This projector is equipped with the network function to control and monitor the projector’s operations using a Web browser and to send e-mail notification. Before using the network function, perform the following three preparation ...

Page 3 - Installation

EN-3 1 Copy two files (DI_4.1.3.6.msi and Setup.exe) contained in the Tools folder of CD-ROM to the hard disk of your personal computer. 2 Double-click the file named Setup.exe. 3 When the following window appears, click Next. Installation Before starting installation, be sure to read “ReadMe.txt” c...

Page 5 - Setting the IP address of the projector

EN-5 1 Start the Projector-Control Device Installer. Select [Start] - [All Programs] - [Projector] - • [Projector-Control Device Installer] (in the case of Windows ® XP). 2 Click the Search button. Projector is recognized. • (Note)When projector isn’t recognized, check the following. The firewall fu...

Page 6 - When using a DHCP server

EN-6 5 Select [Obtain an IP address automatically] and click Next. 6 Click Next. Check that the options are marked with • checkmarks as shown on the right. Keep them unchanged for normal use. 7 Click Assign. 8 Click Finish. 9 Click the Search button. Check the IP address. • When using a DHCP server ...

Page 7 - When not using a DHCP server

EN-7 5 Select [Assign a specific IP address] and click Next. 6 Enter a fixed IP address (for example, 192.168.0.1) and click Next. (Note)Do not use 0 or 255 for the last digit of the IP address. 7 Click Assign. 8 Click Finish. 9 Click the Search button. Check the IP address you set. • (Note)When usi...

Page 8 - Telnet setting

EN-8 1 Start the Projector-Control Device Installer. Select [Start] - [All Programs] - [Projector] - • [Projector-Control Device Installer] (in the case of Windows ® XP). 2 Press the + buttons on the left pane to expand the tree structure until the IP address you set appears. 3 Click the Telnet Conf...

Page 10 - Setting the display language of ProjectorView (language)

EN-10 1 Enter “3” and press the Enter key. 2 To enable the e-mail notification function of ProjectorView, enter “1” and press the Enter key. (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.) Setting the LAN control (LAN-Controlled Mode) Preparation/SetUp (continued) 1 Enter “1” a...

Page 11 - Save and exit; Setting the PJLinkTM certification (PJLink certification Mode)

EN-11 1 Enter “9” and press the Enter key. 2 The setting screen is shaded and the setting is updated. It takes about 10 seconds for the setting to be • updated. Don’t perform communication during this period. Save and exit Because the password, display language, LAN control, and PJLink™ certificatio...

Page 12 - ProjectorView; Using the ProjectorView; How to start up

EN-12 1 Start the Projector-Control Device Installer. Select [Start] - [All Programs] - [Projector] - • [Projector-Control Device Installer] (in the case of Windows ® XP). 2 Expand the tree structure on the left pane until the IP address you set appears. 3 Select the WEB Configuration tab. 4 Click t...

Page 15 - Initial setting

EN-15 Initial setting To load information on the projector such as model name and lamp operating time, set the projector data in advance. Click the SETUP button on the ProjectorView main screen. The Projector Setup screen appears. Enter data according to the description of each setting item. (Note) ...

Page 16 - Support for the PJLinkTM function

EN-16 Support for the PJLink™ function This projector supports standard protocol PJLink™ for projector control and you can control and monitor projector’s operations using the same application among projectors of different models and different manufacturers. To use this function, set the PJLink™ cer...

Page 17 - Support for the PJLinkTM function (continued)

EN-17 [Notes on Instant Shut Down] Instant shutdown of the projector during control using the network function may cause ProjectorView to fail to display data correctly. The operating time and temperature may not be displayed correctly. In this case, close the browser, recognize • this projector usi...