Mitsubishi Electric X490U - Manuals

2 3) Control sequence (1) Send the command from a personal computer to the projector. (The commands must be sent at least 400ms apart.) (2) The projector will send a return command 400ms* after it has received an end code. If the command is not received correctly, the projector will not send the ret...

3 Sending commands Status code from Meaning from the PC etc. projector 30 30 72 35 34 0D Command as same as MENU button '0' '0' 'r' '5' '4' ' ' 30 30 72 35 34 0D Command received '0' '0' 'r' '5' '4' ' ' (Command echo back) [Example] Display MENU selection bar. (' 'is for ASCII code) Button's name on...

4 9) Menu setting commands The menu setting commands execute the menu setting of this projector. If the personal computer doesn’t sendthe commands without attaching the data code, the projector which has received the command replays thesetting data as data code. ITEM ASCII HEX VALUE CONTRAST P 50h ±...