Mitsubishi Electric WL7050U - Manuals

Page 2 - ProjectorView Global+; ProjectorView

EN-2 1.1. Preparing to use network features This projector is equipped with the network function to control and monitor the projector’s operations and to send e-mail notification. Before using the network function, perform the following three preparation steps. • Installing the ProjectorView Global+...

Page 7 - Error Message

EN-7 3. Main screen  Group Name Group of the projector can be selected. When you select “All”, all the registered projectors are displayed. Newly created group(s) are added to the list. When you select your choice of group, all projectors that belong to the selected group are displayed.  Status ta...

Page 9 - Projector registration; Connection example 1

EN-9 4. Projector registration 4.1. Connection Connect the controller PC and the projector, which have installed “ProjectorView Global+”, to a commercially available LAN cable.When connecting multiple projectors, use a commercially available hub.• A LAN terminal is required for the controller PC.• U...

Page 11 - and

EN-11 4. Projector registration Procedure B - Connection example 3 (where projectors are installed via a router) To automatically detect projectors connected via a router, confirm the IP address in the projector network menu and specify a range of IP addresses to search that particular IP address us...

Page 13 - (3) Set the Projector Name and its group and the theft detector.; When deleting projector registration

EN-13 4. Projector registration 4.4. When changing projector settings (1) Select the projector which you like to change from the projector list on the main screen.(2) Select “Edit Projector Setting” from “Configuration” of the menu bar. • “Edit Projector Setting” window is displayed. (3) Set the Pro...

Page 14 - Operation of projector; Operation of projector by remote controller

EN-14 5. Operation of projector 5.1. Operation of projector by remote controller Group or single unit of projector can be operated. (1) Select the projector which you like to operate from the projector list on the main screen. • When selecting more than one projector simultaneously, select while pre...

Page 16 - (1) Select “Add New Group” from “Configuration” of the menu bar.; and put a check mark in the “Enable” box.

EN-16 6. Schedule setting 6.1. Creation of projector group Multiple projectors can be controlled and batched by sorting groups.Also, each group can set each time of the power supply ON/OFF every day.Since the schedule of the power supply ON/OFF is performed by each group, the projector which you lik...

Page 17 - (2) Select “Edit Schedule Setting” from “Configuration” of the menu bar.

EN-17 6. Schedule setting <Note> • The power supply ON and the power supply OFF can not be selected at the same time of the same day of the week. • The Schedule Setting will be executed while “ProjectorView Global+” is in operation.• Depending on usage conditions, such as when there are so man...

Page 25 - An example: Sending an alert message when the lamp change required.

EN-25 8. ProjectorView 8.6. Alert E-mail setting 8.6.1. Alert E-mail function When there is something wrong with the projector, an E-mail is automatically sent to the designated address to notify the error status.To use this function, it is necessary to change the settings in the Alert E-mail Setup ...

Page 26 - (2) Set each item referring to the explanation described below.

EN-26 8. ProjectorView 8.6.2. E-mail setting (1) Click [SETUP] button in the ProjectorView main window (ALERT E-MAIL). • Alert E-mail Setup window is displayed. <Note> • Be sure to enter data within five minutes after the Alert E-mail Setup window is displayed. Click OK to save changes. The co...

Page 29 - Saving messages entered and settings specified in Visual PA2

EN-29 9. Visual PA2 (Visual PA2 enabled projectors only) 9.2. Saving messages entered and settings specified in Visual PA2 You can save messages entered in Textbox, as well as settings specified for Text, Frame, Location, and Text Speech.These must be saved before you activate the Schedule function ...

Page 30 - Configuring the Schedule function of Visual PA2; through

EN-30 9. Visual PA2 (Visual PA2 enabled projectors only) 9.5. Configuring the Schedule function of Visual PA2 By using the Visual PA2’s Schedule function, your intended messages can be displayed on the screen at a set time. (1) Click [Edit] in the Schedule area. • "Visual PA2 Schedule" windo...