Page 2 - RISK OF ELECTRIC SHOCK; CAUTION; : TO REDUCE THE RISK OF ELECTRIC; WARNING; This apparatus must be grounded.; CAUTION
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert...
Page 3 - ENGLISH; Contents; Please, help us to conserve the environment we live in!; Trademark, Registered trademark; and other countries and areas.; Declaration of Conformity; MITSUBISHI ELECTRIC
EN-3 ENGLISH Contents Important safeguards ........................................................................................................................ 4 Preparing your projector ................................................................................................................
Page 4 - Important safeguards
EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2....
Page 6 - Preparing your projector; Checking accessories; Inserting the batteries into the remote control; control is slow to operate.; Cables; Power cord; Others; • Lens cap (Attached to the
EN-6 Preparing your projector 1 2 3 Checking accessories The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package. Important: • The attached power cords are to be used exclusively for this product. Never use them for other pro...
Page 7 - Overview; Control panel; • Used for projector control by computer.; • Do not use the power terminal as a power for
EN-7 ENGLISH Overview Control panel Terminal board 1 2 6 7 8 4 5 3 POWER MENU ENTER STATUS AUTO POSITION COMPUTER ZOOM/FOCUS LENS SHIFT KEYSTONE VIDEO VOLUME 1 5 6 2 3 4 7 8 9 11 10 1 Speaker2 Control panel (inside the cover)3 Air outlet grille4 Remote control sensor (Front)5 Air inlet grille6 Remot...
Page 8 - Bottom side; Remote control; and; About the laser beam
EN-8 1 2 Preparating your projector (continued) Bottom side 1 Lamp cover 2 Adjustment feet Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. Remote control 1 Laser aperture 2 Transmission window 3 Wired remote contr...
Page 9 - Using the remote control; Operational range of the remote control; • Keep the remote control photo-sensor out of direct; • When you use the remote control too close to the; Reception angle; Vertical directions; Using the wired remote control; • When REMOTE OUT terminal on
EN-9 ENGLISH Using the remote control Operational range of the remote control • Keep the remote control photo-sensor out of direct sunlight or fl uorescent lamp light. • Keep the remote control photo-sensor at least 2 m away from fl uorescent lamps. Otherwise, the remote control may malfunction. • If ...
Page 10 - Setting up your projector; Setting up the screen; Adjustment of the projection angle; Keystone adjustment
EN-10 W A A=B B Setting up your projector Setting up the screen Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection angle of the projector. (See below.)• Install the screen and projector so that the projector’s lens is placed a...
Page 11 - LENS SHIFT button; • When you hold down these buttons for 2 seconds; Rear projection
EN-11 ENGLISH Caution: • Placing the projector directly on a carpet impairs ventilation by the fans, causing damage or failure. Put a hard board under the projector to facilitate ventilation. • Place the projector at least 50 cm (or 20 inches) away from the wall to prevent the air inlet grille and t...
Page 12 - Screen size and projection distance; Refer to the following table to determine the screen size.; When the aspect ratio of the screen is 16:9; When the aspect ratio of the image is 16:9
EN-12 40 102 24 61 32 81 19 49 32 81 2 6 2.6 7 54 1.4 74 1.9 12 30 2 6 3 8 60 152 36 91 48 122 29 73 48 122 4 9 3.8 10 82 2.1 112 2.8 18 46 3 9 5 12 80 203 48 122 64 163 38 98 64 163 5 12 5.1 13 110 2.8 150 3.8 24 61 4 11 6 16 100 254 60 152 80 203 48 122 80 203 6 15 6.4 16 138 3.5 189 4.8 30 76 6 1...
Page 13 - Viewing computer images; A. Connecting the projector to a computer; For analog connection:; • This projector uses stereo pin jack for its audio input. Check
EN-13 ENGLISH 2 1 AUDIO OUT AUDIO IN 2 1 2 1 Viewing computer images A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer are turned off. • When connecting the projector to a desktop computer, disconnect the RGB cable that is con...
Page 14 - About DDC; For monitor connection:; • When the audio cable is connected to the AUDIO OUT ter-; Terminal cover; Install the terminal cover; B. Plugging the power cord
EN-14 2 1 1. Plug the attached power cord into the power cord inlet of this projector. 2. Plug the other end of the power cord into a power outlet. • The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country. • This projector uses the p...
Page 16 - Instant Shut Down; Example of the setting procedure for external output
EN-16 POWER MENU ENTER STATUS AUTO POSITION COMPUTER ZOOM/FOCUS LENS SHIFT KEYSTONE VIDEO VOLUME Viewing computer images (continued) To stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • To cancel the procedure, leave the projector for a while or press any button e...
Page 17 - Viewing video images; A. Connecting the projector to video equipment
EN-17 ENGLISH Connecting to a video player, etc. 1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO IN terminal of the projector. 2. Connect one end (white and red) of the supplied audio/ video cable to the audio input terminals (L/MONO, R) of the projector. 3. Connect the ot...
Page 18 - Connecting to video equipment having a DVI-D terminal; • Use DVI cable for connection.; B. Plugging in the power cord; Projector + DVD player or HDTV decoder
EN-18 C B (P B ) Y C R (P R ) B G R AUDIO IN-2 BNC cable (option) DVD player or HDTV decoder BNC-RCA connector (option) COMPUTER/COMPONENT VIDEO IN-2 Connecting to video equipment having a DVI-D terminal You can project high-quality images by connecting the DVI-D terminal of this projector to video ...
Page 20 - It takes several seconds before muting is completely canceled.
EN-20 To stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • To cancel the procedure, leave the projector for a while or press any button except the POWER button. 14. Press the POWER button again. • The lamp goes out and the projector goes into a standby mode. In th...
Page 21 - Setting the aspect ratio; With the remote control:; Still; To resume the motion in the image:
EN-21 ENGLISH Setting the aspect ratio You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the input video signal. How to change the settings: With the remote control: 1. Press the ASPECT button. • Ever...
Page 22 - Menu operation; How to set the menus:
EN-22 Menu operation • Menus are not displayed when no signal is supplied to the projector. * 1: Not available when COLOR ENHANCER is set to sRGB.* 2: Not available with certain signals.* 3: Available only when the input signal is TV50, TV60, 480i or 576i.* 4: Available only when the source is a COM...
Page 23 - Available settings in the menus
EN-23 ENGLISH IMAGE opt. CONTRAST BRIGHTNESS 0 0 STANDARD 0 0 0 COLOR TINT SHARPNESS COLOR TEMP. AUTO COLORENHANCER XGA60 INSTALLATION opt. ON SPLASH SCREEN AUTO POWER OFF BACK COLOR LAMP MODE OFF OFF ON BLUE AUTO POWER ON STANDARD OFF IMAGE REVERSE XGA60 TEST PATTERN CROSS HATCH ZOOM/FOCUS LOCK OFF...
Page 25 - Adjusting projected images; CONTRAST
EN-25 ENGLISH Adjusting projected images To adjust the brightness (CONTRAST and BRIGHTNESS): You can make adjustments for the brightness of the projected image using the menu. (See page 22 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the or button. 3. Ad...
Page 26 - About color temperature; GAMMA mode
EN-26 To adjust the tone of white (COLOR TEMP.): You can select a preset color temperature (white tone) using the menu. (See page 22 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP. by pressing the or button. 3. Select your desired color temperature by pressing the or button. To c...
Page 27 - How to adjust the image supplied from the computer using the menu:; Simple method to adjust the image position
EN-27 ENGLISH This projector automatically and properly projects video signals supplied from the computer. However, some video signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION button. (See page 16.) When the signal is still not projected pr...
Page 28 - Password function; To enable the password function:; Advanced features
EN-28 MENU ACCESS FEATURE XGA60 opt. LOCK UNLOCK OK OK PASSWORD CONFIRM O K CANCEL MENU ACCESS FEATURE XGA60 opt. LOCK UNLOCK OK OK PASSWORD O K CANCEL Password function This projector is equipped with the password function that is designed for prevention of wrong operation by children and restricti...
Page 29 - Mouse remote control; Operation; restart the computer.
EN-29 ENGLISH Mouse remote control By connecting to personal computer through the USB port, you can operate your computer with the projector remote control. Projector + computer with USB connector Operation • You can use the mouse remote control function with a computer supporting USB only. • When t...
Page 30 - Supervising and controlling by computer; Major functions; ProjectorView; About PJLinkTM; Connection
EN-30 Supervising and controlling by computer You can supervise and control the projector’s operation using a personal computer via a LAN network. • To supervise and control the projector, install the software “Mitsubishi Projector Control Device Installer *” con- tained in the attached CD-ROM. For ...
Page 31 - Indicators; Normal condition
EN-31 ENGLISH Indicators POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red STATUS Blinking orange Blinking green Blinking green/red Blinking red Steady red Off Steady or Blinking CONDITION Abnormal temperature • The ventilation grill...
Page 32 - Replacing the lamp; Interval of lamp replacement
EN-32 Replacing the lamp This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold tha...
Page 33 - To replace the lamp:; Reset of the lamp operation time; Maintenance; Cleaning of the projector and the ventilation slots
EN-33 ENGLISH To replace the lamp: 1. Reverse the projector gently. 2. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b). 3. Loosen the screws (c) using a Phillips screwdriver (+). 4. Pull up the handle. 5. Pull out the lamp box by the handle while holding the proj...
Page 34 - Troubleshooting; No image appears on the screen.; • Cancel the AV mute by pressing the MUTE button.
EN-34 POWER Off Steady red Blinking red / green STATUS Off Off Blinking orange Blinking green Steady red Off Steady or Blinking Solution • Connect the power cord to the projector. • Plug the power cord into a wall outlet. • If any objects are blocking the air inlet or outlet grille, remove them and ...
Page 36 - Kensington Lock
EN-36 Problem The exhaust vents emit warm air. No audio is output. The menu can’t be used. “TEMPERATURE!!” is displayed. The mark appears. The remote control doesn’t function easily or at all. The buttons on the control panel (except for the POWER button) don’t function. Abnormal sound is heard. Ima...
Page 37 - Specifi cations
EN-37 ENGLISH Specifi cations The specifi cations and outside appearance of the projector are subject to change without prior notice. *1 : Wireless LAN unit isn’t packaged together with the projector. Replacement part(Option / Not included in the box) Spare lamp (VLT-XD2000LP) Type Model Display Tech...
Page 39 - Connectors; Without terminal cover
EN-39 ENGLISH 1 R(RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 - - 2 TXD IN 3 RXD OUT 4 - - 5 GND - 6 - - 7 - - 8 - - 9 - - 1 5 11 6 10 15 SERIAL (D-SUB 9-pin) Pin No. Name I/O COMPUTER/COMPONENT VIDEO IN-1(Mini D-...
Page 40 - MITSUBISHI Projector Contact Information; Manufactured by Mitsubishi Electric Corporation; MITSUBISHI ELECTRIC CORPORATION
MITSUBISHI Projector Contact Information Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan MITSUBISHI ELECTRIC CORPORATION North America MESCA (Mitsubishi Electric Sales Canada Inc.)http://www.mitsubishielectric.caInformation Technologies Group, 4299 14th Ave...
Mitsubishi Electric WD-73835
Manual
Mitsubishi Electric WD-57734
Manual
Mitsubishi Electric E-20TP
Manual
Mitsubishi Electric A1SJ71E71N-B2
Manual
Mitsubishi Electric CK-35308
Manual
Mitsubishi Electric WS-65411
Manual
Mitsubishi Electric HS-S8300E(BRS)
Manual
Mitsubishi Electric DX-PC25EA
Manual
Mitsubishi Electric XL5980LU
Manual
Mitsubishi Electric XL6500U
Manual
Mitsubishi Electric 1770G
Manual
Mitsubishi Electric WT-42413
Manual
Mitsubishi Electric WD-57831
Manual
Mitsubishi Electric MSH-A18ND
Manual
Mitsubishi Electric WD-60C8
Manual
Mitsubishi Electric XL650U
Manual
Mitsubishi Electric HL2750U
Manual
Mitsubishi Electric MSZ-GE09NA
Manual
Mitsubishi Electric P40
Manual