Mitsubishi Electric WD-60C8 - Manuals

5 Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water....

6 Package Contents Please take a moment to review the following list of items to ensure that you have received everything. Special Features of Your TV Your new high-definition widescreen television has many special features that make it the perfect center of your home entertainment system, including...

1. Television Overview 7 TV Front Panel A/V Reset If you wish to reset the A/V (Audio/Video) settings back to the factory defaults: • To reset all settings at once, press GUIDE and FORMAT on the control panel at the same time. • To reset the defaults for individual inputs, use the Reset selection on...

8 1. Television Overview Front-Panel Indicators LAMP Indicator LED Color TV Condition Additional Information None Normal TV on or standby condition. Normal operation. Green TV just powered off and lamp is cooling. Starts to blink 60 seconds after turning off TV. TV can be turned back on before blink...

1. Television Overview 9 TV Back Panel 1. ANT 1/ANT 2 (Antenna) If you are connecting an antenna or direct cable service without a cable box, connect the main antenna or cable source to ANT 1 . Use ANT 2 for a second source. ANT 1 and ANT 2 can each receive digital and analog over-the-air channels f...

10 1. Television Overview 7. HDMI™ Inputs (High-Definition Multimedia Interface) The HDMI inputs support uncompressed standard and high-definition digital video formats and PCM digital stereo audio. Use the HDMI inputs to connect to CEA-861 HDMI com-pliant devices such as a high-definition receiver ...

11 TV Set-Up Getting Started Review the important safety, installation, and oper- 1. ating information at the beginning of this book.Choose a location for your TV. 2. • Allow at least four inches of space on all sides of the TV to help prevent overheating. Over-heating may cause premature failure of...

12 2. TV Setup remote control to select from icons for the TV inputs. See “Choosing a Viewing Source,” page 26. • Program Listings. Press GUIDE to see ChannelView™ listings for programs on ANT 1 and ANT 2 . See “ChannelView Channel List- ings,” page 29 • Picture Formats. Press FORMAT to cycle throug...

2. TV Setup 13 Initial TV Setup Use the Setup menu for basic TV setup options. Press 1. MENU to open the Main menu. Press 2. to highlight the Setup icon and display the Setup menu. Memorizing Channels For ANT 1 and ANT 2 To start channel memorization With the 1. Setup menu displayed, press to high- ...

14 2. TV Setup Setup Procedure Setup Procedure for TV Inputs Power on the TV. 1. Connect your devices to the TV, making note 2. of which TV input is used for each device. See chapter 3, “TV Connections.” Note: If you wish to use an HDMI device’s CEC capa- bilities, follow the steps in Appendix E. Fi...

2. TV Setup 15 Controlling A/V Receiver Sound Volume Use one of the methods below to control sound volume from an A/V receiver. With a Standard TV Setup Recommended Method: • Program the TV’s remote control for your A/V receiver and enable the Audio Lock feature. See page 68.Program the TV’s remote ...

16 2. TV Setup About Home-Theater Control Systems This summary offers some examples of the control methods available using the TV’s remote control . You may wish to use one or more of these methods in your home theater after completing Auto Input Sensing. Source device connected directly to the TV R...

2. TV Setup 17 Connecting a Computer to the TV Use one of the connection methods listed below based on your computer’s video output. Computer Video Output Video Connection Audio Connection Digital DVI DVI-to-HDMI cable or an HDMI cable with an HDMI-to-DVI adapter Stereo audio cables Note: If the com...

18 2. TV Setup Tip: Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a reminder that the TV is powered on and the lamp is in use. The lamp is in use whenever the TV is powered on, even if the screen appears dark. Computer Video Adjustments Power ...

19 3 TV Connections HDMI 3D GLASSES EMITTER AVR AUDIO OUTPUT DIGITAL AUDIO OUTPUT L R AUDIO L R (480i / 480p / 720p / 1080i) L R DVI/PC INPUT VIDEO AUDIO R L Y Pb Pr AUDIO Pb Y/ VIDEO Pr VIDEO: 480i/480p/720p/1080i/1080p AUDIO: PCM STEREOPC: VGA, W-VGA, SVGA, W-SVGA, XGA, W-ZGA, SXGA, 720p/ 1080p 1 ...

20 3. TV Connections HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Required: HDMI-to-HDMI cable. Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and audio through the single cable. Mitsubishi recommends you use category 2 ...

3. TV Connections 21 Wall Outlet Cable (no cable box) It is very important to connect the incoming cable for your primary viewing source to ANT 1 . Connect the primary incoming coaxial lead cable to 1. ANT 1 on the TV back panel. For an optional secondary antenna source, connect 2. an antenna (or ca...

22 3. TV Connections Figure 8. Connecting a VCR to an Antenna or Wall Outlet Cable VCR to an Antenna or Wall Outlet Cable Required: Two-way RF splitter, two coaxial cables, right and left analog audio cables, either S-video or compos-ite video cable. Connect the incoming cable or antenna to 1. IN on...

3. TV Connections 23 Older Cable Box Required: One coaxial cable. Note: This connection is not recommended. The other connections described in this chapter provide better quality audio and video to the TV and allow NetCommand to work with the cable box. Connect the incoming cable to 1. IN on cable b...

24 3. TV Connections A/V Receiver (Sound System) Using the TV’s Audio Output Most setups require either a digital audio cable or analog stereo audio cables. To send audio from TV channels received on ANT 1 , ANT 2 , or devices con- nected directly to the TV, you must use one of the con-nections show...

3. TV Connections 25 A: Y Pb Pr Component Video Connection Required: Component video and analog stereo audio cables supplied with the camcorder. Connect component video cables from 1. VIDEO OUT on the camcorder to the TV’s Y Pb Pr component jacks on the front panel.Connect left (white) and right (re...

26 TV Operation and Features 4 Choosing a Viewing Source Input Selection menu Choose a viewing source from the Input Selection menu. The current TV input appears as a full-color icon in this menu. Press 1. INPUT to display the Input Selection menu. If there are only two inputs to the TV, INPUT switc...

4. TV Operation and Features 27 1. POWER: Turns TV power on and off. 2. Slide Switch: Selects the A/V device to be oper- ated by the remote control. Set the slide switch to TV for operation of the TV, and NetCommand- controlled devices. Control of additional devices requires programing (see Appendix...

28 4. TV Operation and Features 21. MENU: Displays the main TV menu. When a sub- menu is open, backs up one menu level. 22. EXIT: Closes TV on-screen menus/displays. 23 . F1–F4 For devices under NetCommand control: Perform NetCommand “Learning” to assign your choice of functions to the F1 – F4 keys....

4. TV Operation and Features 29 ChannelView Channel Listings ChannelView screen ChannelView™ shows memorized channels on ANT 1 or ANT 2 . It displays channel names and program information as sent by broadcasters or your local cable service provider and may be incomplete . No program information is d...

30 4. TV Operation and Features Press the INFO key to see the on-screen status display. The most common displays are shown here. You will rarely, if ever, see all status indicators at the same time. Status Display Tuesday 9:10 PM Sleep 30 min 14 13 MUTE Signal Strength 16 15 On-screen status display...

4. TV Operation and Features 31 Using Fav Channels See the current Fav bank number Press INFO . View channels in current Fav bank 1. Press the FAV key. Wait for the TV to tune to a channel in the current Fav bank. 2. Press the FAV key repeatedly to cycle through the channels available in the current...

32 4. TV Operation and Features TV Signals and Display Formats Signal Definitions 480i: Traditional interlaced signals from ANT-1 and ANT 2 , composite VIDEO , component Y Pb Pr , and HDMI jacks. 480p: Progressive-scan DVD signals on component Y Pb Pr and HDMI jacks. 720p and 1080i: High-definition ...

4. TV Operation and Features 33 Viewing Camera Files JPEG Photos and the USB Photo Port Connect your 1. USB card reader or USB drive to the TV’s USB Photo port.The USB Photo menu displays while files are being read. Wait until you see the completion message on screen before continuing. Note: Some ma...

34 4. TV Operation and Features Media Setup Menu Media Setup menu In the Media Setup menu you can adjust the slide show display, number of repetitions, or display interval. • Select either Auto or Manual advance. During manual operation, press or ENTER to advance to the next slide. • For automatic a...

4. TV Operation and Features 35 This section provides Instructions for viewing 3D video using the TV’s 3D feature. The 3D options are found in the Setup > 3D menu described on page 47 . Initial Set-Up Check if your HDMI 3D video source device outputs 1. a 1080p 60 Hz signal. This information will...

36 5 TV Menus Remote Control Keys for the TV Menu System 1 2 4 5 6 7 3 Key Function 1 MENU Display or close the Main menu or move back one menu level. 2 EXIT Close all menus and return to TV viewing. 3 (Adjust Left/Right Keys) Move through screens to select menu options. • Change settings. • Scroll ...

5. TV Menus 37 AV Menu An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point. The AV menu contains sub-menus for audio and video adjustments AV Menu Options Video See the de...

5. TV Menus 39 AV menu, Video options Note: See “Computer Video Adjustments” on page 18 for additional adjustments for computer images. Video Menu Mitsubishi recommends you assign names to TV inputs before making video adjustments (use the Inputs > Name menu). Otherwise, adjustments will be reset...

40 5. TV Menus SharpEdge (835 Series TVs) On, Off SharpEdge™ adds special edge enhancements to make the image appear sharper. Saved by input. Deep Field Imager (736 or 835 Series TVs) On DeepField™ Imager dynamically enhances black levels in portions of the screen to provide strong contrast with det...

5. TV Menus 41 Audio Menu To make audio adjustments: From the Audio menu: • Press 1. to highlight an option Press 2. to display the submenu and adjust. Press 3. MENU to return to the AV menu. While watching TV: • Press the AUDIO key repeatedly to display the audio option you want to change. Press to...

42 5. TV Menus Captions Menu Captions on Analog Channels The TV can decode captions from ANT 1 / ANT 2 and the VIDEO composite and S-VIDEO jacks. Broadcasters can send either standard closed captions or text service. Stan-dard closed captions follow the dialogue of the program and display in a small...

5. TV Menus 43 Setup Menu Options Language EnglishSpanish Display on-screen menus in either English or Spanish. Note: To listen to audio in other languages (when available), see the section on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog signal) or Language (digital sig...

44 5. TV Menus Setup Menu Options Edit Use the Edit menu to edit channel options when ANT 1 or ANT 2 is the current source, To highlight a channel number to edit: • Press CH / to jump to the next page of channel numbers. Press and hold CH / to speed through pages. • Press to move through all channel...

5. TV Menus 45 Setup Menu, continued Clock Use either the manual or auto method to set the clock. Set the clock if you wish to: • Use the TV’s Timer function.• Maintain accurate ChannelView listings. Setup Menu Options Clock Settings Manual. To set the clock manually: Select 1. Manual . Set the time...

46 5. TV Menus Setup Menu, continued Timer Use the Timer to set a time for the TV to turn on auto-matically. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the requested time, the TV will automatically tune to the designated channel. • The TV clock mus...

5. TV Menus 47 Setup menu, Energy options Setup Menu Options Energy Energy Mode Fast Power On Use the Energy Mode option to select the level of power consump-tion while the TV is turned off.The default setting is Fast Power On . Low Power uses less energy, but TV power-on takes longer and some TV fe...

48 5. TV Menus Inputs Menu Inputs Menu Options Name Cable Box, Camcorder, CD/Audio, DVD (DVD, DVD2, Blu-Ray), DVR, Game (Game, PS, Xbox, Wii), MP3 Player, PC, Satellite, VCR, AVROn/Off ( ANT 1 and ANT 2 only) Delete (deactivated HDMI only) Control On, Control Off (CEC- enabled HDMI devices; operates...

5. TV Menus 49 TV locks available from the Lock menu are: Parent Lock by Ratings Restricts access to programming based on V-Chip rating signals sent by the broadcaster. Other Time Lock by Time Restricts TV use by time of day. Control Panel Lock Control Panel Disables the buttons on the TV’s control ...

50 5. TV Menus Lock Menu, continued Parent Menu Options (U.S.-based rating system) Option Name and Description Lock Off, On Disables or enables program blocking based on V-Chip signals and the U.S. rating system. TV Rating TV-Y Youth. For children under 7. Highlight the rating level you wish to chan...

52 6 NetCommand IR Control About NetCommand IR Control Note: To learn about NetCommand for HDMI devices, available on all TV models, see Appendix E, “NetCommand HDMI Control of CEC Devices,” page 77. • NetCommand IR home-theater control is avail-able on the following models: WD-65736, WD-73736 - WD-...

6. NetCommand IR Control (736 and 835 Series TVs) 53 IR Emitter Placement An IR emitter cable is included with the TV. The NetCommand system uses emitters connected to the IR—NetCommand Output jack to control other devices such as DVD players, cable boxes, satellite receivers, and VCRs. Connect the ...

54 6. NetCommand IR Control (736 and 835 Series TVs) To perform this procedure, you need: The remote controls for both the TV and the • device you want to control.The IR emitter cable supplied with the TV. • Note: To set up an A/V receiver, see “Set Up NetCom- mand Control of an A/V Receiver” later ...

6. NetCommand IR Control (736 and 835 Series TVs) 55 Refer to this chart when “learning” device keys. “Learn” some, all, or none of the keys used for each device type. The chart has space for you to write in functions you assign to the F1 – F4 keys. NetCommand Specialized Device Keys See the followi...

56 6. NetCommand IR Control (736 and 835 Series TVs) Key Name in Learning Screen Special Operation Description and Setup How to Use Power On Manual Power On/Off Use for devices that have only one POWER key. Press 1. INPUT to display the Input Selection menu.Press 2. to highlight the icon for the dev...

6. NetCommand IR Control (736 and 835 Series TVs) 57 Key Name in Learning Screen Special Operation Description and Setup How to Use Guide Displaying the Disc Menu (DVD or high-defini-tion disc format) “Learn” the DISC MENU , TOP MENU, or other key as named on the original remote in the Guide learn- ...

58 6. NetCommand IR Control (736 and 835 Series TVs) Several types of A/V receiver control are described here using the Inputs > AV Receiver menu. Controlling power and volume is described on this • page.For most equipment setups, see “A/V Receiver • Control: Automatic Audio Switching” on the opp...

6. NetCommand IR Control (736 and 835 Series TVs) 59 Setting Up NetCommand Control of an A/V Receiver, continued Perform one of these setups to enable the A/V receiver to switch automatically to the correct audio input when you select a device in the TV’s Input Selection menu. To set up control of a...

6. NetCommand IR Control (736 and 835 Series TVs) 61 Setting Up NetCommand Control of an A/V Receiver, continued Audio Switching Setup 2: Automatic A/V Receiver Switching to a Surround Sound Device Use this setup to send digital surround sound directly from a device to an A/V receiver. Under 1. Lear...

6. NetCommand IR Control (736 and 835 Series TVs) 63 Setting Up NetCommand Control of an A/V Receiver, continued Press 3. ENTER and the highlighted Input label will start flashing to indicate readiness for “learning.”While the 4. Input text is flashing, press and hold the key on the A/V receiver’s r...

64 Appendices Appendix A: Specifications Component Video (Y/Pr/Pb) up to 3 sets CEA-770.1 & CEA 770.2 480i, 480p, CEA 770.3 720p and 1080i (TV analog component video standards) RCA Pin Plug Y: 1.0 Vp-p (includes sync), 75-ohm Pr: 700 mV p-p, 75-ohmPb: 700 mV p-p, 75-ohm 1 dedicated set of compon...

Appendices 65 Bypassing the Parental Lock After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus. If you forget your pass code, you can view the locked TV without entering your pass code. When ...

Appendices 67 This appendix explains programming the TV’s remote control to operate other A/V devices. This is distinct from NetCommand control. The TV’s remote control can operate other devices by three different methods: • Remote Control Programming: You must move the slide switch to the position ...

68 Appendices IMPORTANT You may need to reprogram the remote control after changing the batteries. Programming the Remote Control Move the slide switch at the top of the remote to 1. the position for the product you want to control. Refer to the table below. Only one of each device type can be contr...

Appendices 69 Programming Codes Audio Amplifiers Make Code Acurus 30765 Adcom 31100, 30577 Altec Lansing 31742 Aragon 30765 Bel Canto Design 31583 Bose 30674 Carver 30892 Cary Audio Design 31879 Classe 31461 Curtis Mathes 30300 Durabrand 31561 Flextronics 31879 GE 30078 Halcro 31934 Harman/Kardon 30...

70 Appendices Programming Codes, continued CD Players Make Code Grundig 30157 Hafler 30173 Harman/Kardon 31202, 30173, 30157, 30100, 30083 Hitachi 30032 Inkel 30180, 30157 Integra 30101 Jerrold 30003 JVC 31294, 30072, 30032 Kenwood 30626, 30190, 30037, 30029, 30028, 30000 KLH 31711, 31318 Koss 31317...

Appendices 75 CAUTION BURN DANGER! HOT SURFACES INSIDE! Touch lamp cartridge handle only. Do not touch lamp or lamp car- tridge housing. Keep lamp cartridge horizontal during removal. Do not tilt as glass may come out and cause injury. Replace lamp car- tridge only with the same part number 915B4030...

76 Appendices Lamp-Cartridge Replacement Removing the Old Lamp Cartridge Turn off TV power and allow the lamp to cool for at 1. least one hour before proceeding.After the lamp has cooled, remove the cover of the 2. lamp compartment, located on the back of the TV.Refer to figures 1 and 2. Use a #2 (l...

Appendices 77 Turn on the device and allow it to complete the 1. power-on sequence (boot up).Connect the device to one of the TV’s HDMI inputs. 2. When the TV detects the connection, the Auto Input Sensing screen will appear and provide additional instructions. You will see one of the following scre...

78 Appendices Figure 4 (NetCommand HDMI Control is off). • The TV’s NetCommand for HDMI Control is turned off. Action: Follow the instructions in “Enabling or Disabling the TV’s NetCommand HDMI Control” on the previous page. Note: You may not see the screen in figure 2 if the HDMI device has previou...

Appendices 79 Resolving CEC Conflicts, Changing HDMI Connections, Removing HDMI Devices Because each manufacturer selects which CEC func-tions to support, some devices can conflict with other devices. If control conflicts arise, you can: Turn off CEC in the other device’s setup menu. • Turn off TV c...

80 Appendices Appendix F: Troubleshooting Reset Name When to Use How to Use Resulting Action Format When the picture shape seems incorrect, use FORMAT to change the shape of the picture. Press the FORMAT key to cycle through the available formats to find the best format for the current picture. The ...

Appendices 81 Reset Name When to Use How to Use Resulting Action System Reset If the TV does not turn on or off, does not respond to the remote control or control-panel buttons, or has audio but no video. Press the SYSTEM RESET button on the control panel. The TV will turn off and the green LED will...

82 Appendices General TV Operation Symptom Remarks 1. A fan is running even while the TV is powered off. The room is too warm. When the TV is off, internal components continue to draw power and must be cooled by the fan. 2. The fan gets louder after the TV is shut off. Normal operation. The fan spee...

Appendices 83 TV Power On/Off Symptom Remarks 1. TV takes an excessively long time to power on. • When switched on, the TV needs time to boot up, just as a computer does. Also, the TV’s lamp requires a few moments to heat up to full brightness. • TV Energy Mode is set to Low Power. Change TV Energy ...

84 Appendices Picture Symptom Remarks 1. Picture does not look like a high-definition picture. Not all signals are high-definition signals. To receive high-defini-tion programming from your cable or satellite provider, you must subscribe to the provider’s high-definition service. Some over-the-air b...

86 Appendices Appendix F: Troubleshooting, continued NetCommand IR ControlSymptom Remarks 1. Cannot see the menu from the A/V Receiver. A/V Receiver Set Up for Audio-Only Switching • The A/V Receiver is not connected to any video input of the TV. To check the A/V Receiver menu, temporarily plug into...

Appendices 87 Appendix F: Troubleshooting, continued NetCommand IR ControlSymptom Remarks 5. There is no sound or picture from the A/V receiver for my DVD player or other device connected to the A/V receiver; the A/V receiver should be sending video to the TV over an HDMI cable.(A/V Receiver Set Up ...

88 Trademark and License Information LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTAB...

Trademark and License Information 89 Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all softwar...

90 Warranty Mitsubishi DLP Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising fr...

92 Index Index A Adjust Keys (Up/Down/Left/Right) 27 , 36 Anamorphic Picture Format 32Antenna Connecting 21Signal Strength for Digital Chan- nels 30 Antenna Inputs (ANT 1, ANT 2) 9Audio Lock (A/V receiver control) 68Audio Output Jacks 9Auto Input Sensing 13Auto-Off (Sleep Timer) 26Auto-On (Timer) 46...

Website: www.mitsubishi-tv.com E-mail: [email protected] For questions, call Consumer Relations at 800-332-2119 To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides Visit our website www.mitsuparts.com or call 800-553-7278 SYSTEM RESET If the TV does not respond ...