Mitsubishi Electric SD105U - Manuals

Mitsubishi Electric SD105U – Manual in PDF format online.

Manuals:

Manual

Manual Mitsubishi Electric SD105U

Summary

Page 2 - WARNING; CAUTION; CAUTION; : TO REDUCE THE RISK OF ELECTRIC; NO USER-SERVICEABLE PARTS INSIDE

EN-2 The lightning flash with arrowhead symbol within an equilateral triangle is intended to aler t the user to the presence of uninsu-lated "dangerous voltage" within the product’s enclosure that may be of suffcient magnitude to constitute a risk of electric shock. The exclamation point wit...

Page 3 - ENGLISH; Contents; Trademark, Registered trademark; Declaration of Conformity

EN-3 ENGLISH Contents Important safeguards................................................................................................................................ 4Overview ..........................................................................................................................

Page 4 - Important safeguards

EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2....

Page 6 - Overview; Control panel; Terminal board

EN-6 Overview 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor 6 Air inlet grille 7 Air inlet grille 8 Terminal board 9 Air inlet grille 10 Speaker 11 Adjustment feet (front) 12 Lock bar 13 Foot adjustment buttons (Left/Right) Control panel 1 Power button 2 AUTO P...

Page 7 - Bottom side; This model does not have this function.

EN-7 ENGLISH Bottom side 1 Lamp cover 2 Adjustment feet (front) Caution: Do not replace the lamp immediately after using the pro-jector because the lamp would be extremely hot and it may cause burns. Remote control 1 ON button 2 STILL button 3 AUTO POSITION button 4 ENTER button 5 MENU button 6 KEYS...

Page 8 - Remote control; Battery installation

EN-8 Remote control Battery installation Use two AA (R6) size batteries. 1. Remove the back cover of the remote control by pushing the battery compar tment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -).• Load the batteri...

Page 9 - Installation; Layout of the projector; Front projection

EN-9 ENGLISH Installation Layout of the projector Image size varies depending on the distance between the screen and the projector. Front projection • The above figures are approximate and may be slightly different from the actual measurements. Front projection, ceiling mounting For ceiling mounting...

Page 10 - Basic connections; Projector + AV device

EN-10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before star ting connection. • Plug in the power co...

Page 11 - Projector + Computer; For computer with Mini D-SUB; For Macintosh

EN-11 ENGLISH Projector + Computer For computer with Mini D-SUB Important: • When you use a longer RGB cable instead of the provided cable, the image may not be projected correctly. • Some computers require additional connectors or analog RGB output adapters to be connected with this projector. Cont...

Page 12 - Preparation; Preparation for projection; After using the projector:

EN-12 Preparation Preparation for projection 1. Attach the provided power cord to the projector. 2. Plug the power cord in the wall outlet. 3. Remove the lens cap. Warning: • Do not look into the lens directly when the projector is on. • The lens cap is for protecting the lens. If you leave the lens...

Page 13 - Basic operation; next time

EN-13 ENGLISH Basic operation Power-on 1. Turn on the device connected to the projector first. 2. Plug the power cord in the wall outlet. • The POWER indicator lights up. • If the power cord is unplugged from the wall outlet before the projector is cooled down completely after use, the fans may star...

Page 14 - Instant Shut Down; Volume from the speaker; AV mute

EN-14 Basic operation (continued) Power-off Use the following procedure to turn off the projector. 1. Press the POWER button on the control panel or the OFF button on the remote control. • The message "POWER OFF? YES : PRESS AGAIN" appears on the screen. • To cancel, press any button except ...

Page 15 - Menu operation; IMAGE

EN-15 ENGLISH Menu operation Basic operation Several settings can be adjusted using the menu. Example : Auto power off time setting 1. Press the MENU button. 2. Press the W or X button to select INSTALLATION. 3. Press the ENTER button (or T button). 4. Press the S or T button to select AUTO POWER OF...

Page 16 - IMAGE; INSTALLATION

EN-16 Menu operation (continued) 1 IMAGE CONTRAST ................................................Use to adjust the image contrast. The contrast becomes higher as the value increases. BRIGHTNESS.............................................Use to adjust the image brightness. The image becomes brighte...

Page 18 - Image adjustment; To control the light level of the image :; Color temperature

EN-18 Image adjustment Image adjustment You can adjust the image using the IMAGE menu. To control the white-to-black level of the image : Adjust CONTRAST in the IMAGE menu. Press the X button to increase the contrast and the W button to reduce it. To control the light level of the image : Adjust BRI...

Page 19 - Adjustment of the image from the computer; To move the image horizontally :; Simple adjustment method

EN-19 ENGLISH Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer. However, sometimes images are not projected correctly owing to the type of the computer used. When the image from the computer isn’t projected correctly, press th...

Page 20 - Advanced feature; Still; To resume the motion in the image:; Connection

EN-20 Advanced feature Still To stop the motion in the image temporarily (or to display a still image): Press the STILL button on the remote control. • The image will freeze temporarily. To resume the motion in the image: Press any button on the remote control. Important: • Do not display a still pi...

Page 21 - Password function; To enable the password function:; To cancel the password function:

EN-21 ENGLISH Password function This projector is equipped with the password function that is designed for prevention of wrong operation by children and restriction on operation by other than specified users. MENU ACCESS ............All the buttons except for the POWER button on the projector are di...

Page 22 - Lamp replacement; Reset of the lamp operation time

EN-22 Lamp replacement When the lamp no longer functions, replace it with a new one. Caution: • Do not remove the lamp immediately after using the projector. You may get burned because the lamp very hot after use. • Before replacing the lamp, press the POWER button to turn off the lamp and wait for ...

Page 23 - Troubleshooting; Images aren’t projected on the screen.; POWER

EN-23 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. Images aren’t projected on the screen. Problem Cause and solution Power isn’t turned on. • Check the states of the indi...

Page 24 - Images aren’t projected correctly.

EN-24 Troubleshooting (continued) Images aren’t projected correctly. Problem Cause and solution Projected images are shaking.Projected images are displaced. • Check that the cable connected to the external device isn’t intermittent. • Connect the cable’s plug with the external device’s connector fir...

Page 25 - Others; Cleaning of the projector and the ventilation slots; Cleaning of the lens

EN-25 ENGLISH Others When the problems below occur after the lamp is replaced, check the following. Maintenance Warning: Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols when cleaning the projector body and lens. Flammable substances may ignite causing fire or breakdown ...

Page 26 - Indicators; Normal condition

EN-26 Indicators This projector has two indicators, each of which shows the operation condition of the projector. The following offer solutions to possible problems. If these problem persist, turn the projector off and consult your dealer. Normal condition Abnormal condition POWER STATUS CONDITION N...

Page 27 - Specifications; Kensington Lock

EN-27 ENGLISH Specifications • The specifications and outside appearance of the projector are subject to change without prior notice. Kensington Lock This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came wit...

Page 28 - Replacement part

EN-28 Specifications (continued) Connectors Dimensional drawings (unit : mm) What’s included in the box Replacement part 1 5 11 6 10 15 pin No. Spec. 1 VRED 2 VGREEN 3 VBLUE 4 NC 5 GND 6 GND 7 GND 8 GND 9 VDC5V 10 GND 11 NC 12 VSDA 13 HSYNC 14 VSYNC 15 VSCL pin No. Spec. 1 DSUB_ROUT 2 DSUB_GOUT 3 DS...

Page 30 - MITSUBISHI Projector Contact Information

MITSUBISHI Projector Contact Information Nor th AmericaMESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.caInformation Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, CanadaSales & Technical Inquires Phone : +1-(800) 450-6487 Fax : +1-(905) 475-7958 E-ma...