Mitsubishi Electric QS0J71GF11-T2 - Manuals

Page 2 - SAFETY PRECAUTIONS; PRÉCAUTIONS DE SÉCURITÉ

A-1 SAFETY PRECAUTIONS (Read these precautions before using this product.) Before using this product, please read the Safety Guidelines included with the base unit.Also, please read this manual, the relevant manuals, the manuals for standard programmable controllers, and the relevant safety standard...

Page 3 - CONDITIONS OF USE FOR THE PRODUCT; transportation systems,

A-2 CONDITIONS OF USE FOR THE PRODUCT (1) Although MELCO has obtained the certification for Product's compliance to the international safety standards IEC61508, EN954-1/ISO13849-1 from TUV Rheinland, this fact does not guarantee that Product will be free from any malfunction or failure. The user of ...

Page 4 - REVISIONS

A-3 REVISIONS *The manual number is given on the bottom right of the cover. © 2011 MITSUBISHI ELECTRIC CORPORATION Print date *Manual number Revision April 2011 IB(NA)-0800467-A First edition September 2011 IB(NA)-0800467-B Correction of safety precautions June 2014 IB(NA)-0800467-C Addition of desc...

Page 5 - CONTENTS

A-4 CONTENTS 1. OVERVIEW..................................................................................................... 1 1.1 Safety Programmable Controller Product List .......................................... 1 2. SPECIFICATIONS ................................................................

Page 6 - MANUAL

A-5 MANUAL The manual related to this product is shown below. Please place an order as needed. COMPLIANCE WITH THE EMC, LOW VOLTAGE, AND MACHINERY DIRECTIVES (1) Method of ensuring compliance To ensure that Mitsubishi programmable controllers maintain EMC, Low Voltage, and Machinery Directives when ...

Page 7 - Safety Programmable Controller Product List

1 1. OVERVIEW This manual describes the specifications, part names, and settings of the QS0J71GF11-T2 CC-Link IE Field Network master/local module (hereinafter referred to as the QS0J71GF11-T2), which is used with the MELSEC-QS series safety CPU module.After unpacking, confirm that the following ite...

Page 8 - Performance Specifications

2 2. SPECIFICATIONS 2.1 Performance Specifications Table 2.1 shows the performance specifications of the QS0J71GF11-T2. For the general specifications of the QS0J71GF11-T2, refer to the user's manual for the safety CPU module used. Table 2.1 Performance specifications Item Specifications Number of c...

Page 9 - Normes de sécurité; Use the product according to the following safety standards.; Module Replacement; Replace the module according to the following replacement cycle.

3 For transmission delay time or other specifications, refer to the following.MELSEC-QS CC-Link IE Field Network Master/Local Module User's Manual 2.2 Safety Standards Normes de sécurité Use the product according to the following safety standards. Utiliser le produit dans le respect des normes de sé...

Page 10 - MOUNTING AND INSTALLATION; Handling Precautions

4 3. MOUNTING AND INSTALLATION 3.1 Handling Precautions The following is a list of precautions for handling the master/local module: (1) Do not drop or apply strong shock to the module case since it is made from resin. Doing so may cause failure. (2) Do not remove the printed-circuit board of the mo...

Page 13 - Ethernet Cable Wiring; Câblage pour câble Ethernet; This section describes available network topologies.

7 5. EXTERNAL WIRING 5.1 Ethernet Cable Wiring Câblage pour câble Ethernet (1) Network topology Topologie du réseau This section describes available network topologies. Cette section présente les topologies réseau disponibles. For details on the network topologies, refer to the following.MELSEC-QS C...

Page 14 - French

8 (2) Connecting the cable Raccordement du câble PORT1 and PORT2 need not to be distinguished. Il n'y a pas de distinction particulière à faire entre PORT1 et PORT2. (a) When only one connector is used in star topology, either PORT1 or PORT2 is applicable. Si on utilise un seul connecteur en topolog...

Page 16 - EXTERNAL DIMENSIONS

10 6. EXTERNAL DIMENSIONS 27.4 23 115 98 4 (Unit: mm)

Page 19 - MEMO

Page 20 - WARRANTY

WARRANTY Please confirm the following product warranty details before using this product. 1. Limited Warranty and Product Support. a.Mitsubishi Electric Company ("MELCO") warrants that for a period of eighteen (18) months after date of delivery from the point of manufacture or one year from ...