Mitsubishi Electric PFD-P250500VM-A - Manuals

Page 2 - Кнопка контроллера ДУ

2 1 [Room temperature adjustment] Button 2 [Timer/continuous] Button 3 [Selecting operation] Button 4 [Time selection] Button [Time-setting] Button 5 [Louver] Button 6 [Fan speed adjustment] Button 7 [Up/down airflow direction] Button 8 [Ventilation] Button 9 [Checking/built-in] Button 0 [Test run] ...

Page 5 - Safety precautions; Symbols used in the text; : Indicates an action that must be avoided.; Carefully read the labels affixed to the main unit.; Make sure that there is a main power switch.; Contents

5 GB D F I NL E P GR RU TR 1. Safety precautions s Before operating the unit, make sure you read all the “Safetyprecautions”. s “Safety precautions” lists important points about safety.Please be sure to follow them. Symbols used in the text Warning: Describes precautions that should be observed avoi...

Page 6 - Local; Ensure that the drain trap is properly water-sealed.; Names and functions of various parts; Turn off the power supply when the filter is changed.; ”) display that flashes in the

6 GB D F I NL E P GR RU TR TIMER SET PAR-20MAA ON/OFF TEST RUN FILTER CHECK TEST TEMP. Normal Local C 3 2 E C A 1 6 8 7 4 B • Ensure that the drain trap is properly water-sealed. - If the drain trap is modified, or is not water-sealed, the trap will not function and a water leak may occur. Inject wa...

Page 8 - Caring for the unit; How to clean; Washing it in hot water (more than 50; The smart way to use; Clean the filter thoroughly; Selecting Normal and Local Operation; Selecting Local operation; Control of Indoor Unit Inlet or Outlet Temperature; CHECK

8 GB D F I NL E P GR RU TR 7. Caring for the unit Always have filter maintenance performed by a service person.Before care-taking, turn the power supply OFF. Caution: • Before you start cleaning, stop operation and turn OFF the power supply.Remember that the fan is rotating inside at high speed, pos...

Page 10 - Checking Drainage; Adjust parallel of the fan and motor pulleys in accordance with; Cleaning the Indoor Unit Heat Exchanger; ; Parallel

10 GB D F I NL E P GR RU TR 10. Checking Drainage Check that water is able to drain smoothly. If water is unable to drain smoothly, check for blockage of the grooves in the drain pan and the piping trap by paper particles etc.Carefully clean the grooves in the drain pan and the piping trap to preven...

Page 11 - Table 1 Maintenance and Checks

11 GB D F I NL E P GR RU TR Unit Parts Fan motor Bearing Fan belt Air filter Drain pan Drain hose LinearexpansionvalveHeatexchanger Float switch Displaylamp Compres-sor Fan motor LinearexpansionvalveHeatexchanger Pressureswitch Cooling fanfor inverter Check frequency 6 months 3 months 6 months 1 yea...

Page 12 - Warranty and Servicing; Table 2 Maintenance and Check Frequencies; Outdoors

12 GB D F I NL E P GR RU TR 16. Specifications Notes: *1 Cooling capacity indicates the maximum value at operation under the following condition. Cooling: Indoor: 27 ° C DB/19 ° C WB Outdoor: 35 ° C DB *2 The operating noise is the data that was obtained in an anechoic room. • Both indoor and outdoo...

Page 13 - Printed in Japan

WT04232X01 Printed in Japan HEAD OFFICE: MITSUBISHI DENKI BLDG., 2-2-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN