Mitsubishi Electric LDT322V - Manuals

• The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power outlet, which is easily accessible. • Handle with care when transporting. Save packaging for transporting. • Please clean the holes of back cabinet to reje...

English Contents * Remember to save your original box and packing material to transport or ship the monitor. Your new LDT322V monitor box* should contain the following:• LCD monitor • Power Cord (3 m) • Video Signal Cable (4 m)• User’s Manual • Wireless Remote Control and AAA Batteries • Clamper x 2...

ON EXIT MUTE INPUT Button Location OFF EXIT button Activates the OSD menu when the OSD menu is turned-off.Acts as EXIT button to move to previous menu with OSD menu. Remote control sensor and Power indicator Receives the signal from the remote control (when using the wireless remote control). See al...

English AUDIO IN 1, 2, 3 To input audio signal from external equipment such as a com-puter, VCR or DVD player. AUDIO OUT To output the audio signal from the AUDIO IN 1,2 and 3 jack. VIDEO IN/OUT VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA are not available at the...

Wireless Remote Control POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO<S>] and [VIDEO]. AUDIO INPUT button Selects from input audio signal, [AUDIO1], [AUDI...

English Handling the remote control * Do not subject to strong shock.* Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immedi-ately. * Avoid exposure to heat and steam.* Other than to install the batteries, do not open the remote. Operatin...

1. Determine the installation location CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF.Installing your LCD display must be done by a quali fi ed technician. Contact your dealer for more information. CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.Failu...

English 7. Adjust the sound Make adjustments when adjustment of the volume is required. 8. Adjust the screen (See pages 23-31) Make adjustments when adjustment of the screen display position or distortion is required. 9. Adjust the image (See page 23-31) Make adjustments when adjustment such as the ...

13. When LDT322V is installed in portrait position Conditions LDT322V can be installed in portrait position, under the following conditions: Caution: Portrait position is effective only when wall-mounted or ceiling-mounted.The stands(legs) can not be fi tted to the monitor in portrait position. Plac...

English 1. Lay the screen face down Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Failure ...

Connections Before making connections: * First turn off the power of all the attached equipment and make connections.* Refer to the user manual included with each separate piece of equipment. Wiring Diagram LCD monitor DVD player HD or laser disk player Equipment withdigital interface Personal compu...

English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image.Some video cards may not display an image correctly. Connect the LCD Monitor to a Personal Computer • To connect the RGB 2 IN connector (mini D-sub 15 pin) on t...

Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The RGB 1 IN connector also accepts a DVI-D cable.• I...

English Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video.Refer to your DVD player owner’s manual for more information. Connect the LCD Monitor to a DVD Player • To connect the DVD/HD In connector (BNC) on the LCD monitor, ...

Connecting to a Stereo Ampli fi er You can connect your stereo ampli fi er to your LCD monitor. Refer to your ampli fi er owner's manual for more information. Connect the LCD Monitor to a Stereo Ampli fi er • Turn on the LCD monitor and the ampli fi er only after all connections have been made. • Us...

English 1. Pressing the Main Power Switch. NOTE: When the Main Power Switch is used to power off the LCD monitor, the remote control and the power button will not activate the on mode and both green and red power indicator turn off. Be sure to turn the Main Power Switch to the on mode before using t...

Power Indicator Status Power ON Green Power OFF RedRed OnGreen Blinking Power Standby Red, GreenRed Blinking* Power Standby when “SCHEDULE” is enable Diagnosis(Detecting failure) See troubleshooting on page 35 Using Power Management The LCD monitor follows the VESA approved DPM PowerManagement funct...

English Information OSD RGB1, 2, 3 Video Input mode Input signal Information Audio input mode Picture Size mode RGB2 1024 x 768 48kHz 60Hz AUDIO : 1 SIZE : FULL ) DVD/HD Video Input mode Audio input mode Picture Size mode DVD/HD AUDIO : 3 SIZE : FULL VIDEO<S>, VIDEO Video Input mode Input Sign...

English BRIGHTNESS Adjusts the overall image and background screen brightness.Press + button to increase brightness.Press - button to decrease brightness. CONTRAST Adjusts the image brightness in relation to the input signal.Press + button to increase contrast.Press - button to decrease contrast.NOT...

H POSITION Controls Horizontal Image position within the display area of the LCD.Press + button to move screen to right.Press - button to move screen to left. V POSITION Controls Vertical Image position within the display area of the LCD.Press + button to move screen to UP.Press - button to move scr...

English BALANCE Adjust the balance of L/R volume.Press + button to move the stereo sound image to right.Sound of the left side will be small.Press - button to move the stereo sound image to left. TREBLE To accentuate or reduce the high frequency sound.Press + button to increase TREBLE sound.Press - ...

AUTO SETUP * : INPUT RGB2,3 only Press "SET" button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level.Press "EXIT" button to cancel execution AUTO SETUP and then will return to the previous menu. AUTO ADJUST *...

English OSD TURN OFF The OSD control menu will stay on as long as it is use. In the OSD Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 5 -120 seconds. INFORMATION OSD Selects the information OSD di...

INPUT RESOLUTION * : INPUT RGB2,3 only Selects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768.AUTO: Determines the resolution automatically.1024x768: Determines the resolution as 1024x7681280x768: Determines the resolution as 1280x7681360x768: Determines the resolut...

NOTE 1: IMAGE PERSISTENCE Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but c...

Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are:• Power ON or OFF• Switching between input signals Connection LCD Monitor + PC NOTE: If you...

Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. Color Control Systems: Allows you to adjust the...

English Troubleshooting No picture • The signal cable should be completely connected to the display card/computer.• The display card should be completely seated in its slot.• Front Power Switch and computer power switch should be in the ON position.• Check to make sure that a supported mode has been...

No Sound • Check to see if speaker cable is properly connected.• Check to see if mute is activated.• Check to see if volume is set at minimum. Remote Control is not available • Check the Remote Control’s batteries status.• Check if batteries are inserted correctly.• Check if the Remote Control is po...

English Speci fi cations Speci fi cations (LDT322V) Product SpecificationsLCD Module Frequency Pixel ClockViewable SizeInput Signal PC-Input: VIDEO Input: AUDIO Input: RS-232C:Output Signal PC-Output: VIDEO Output: AUDIO Output: Speaker Output: Resolutions Supported Power SupplyPower Consumption Ope...

Pin Assignment 1) Analog RGB input (Mini D-SUB 15P): R G B 2 Mini D-SUB 15P 1 Video Signal RedVideo Signal GreenVideo Signal BlueGNDDDC-GNDRed-GNDGreen-GNDBlue-GND+5V (DDC)SYNC-GNDGNDDDC-SDAH-SYNCV-SYNCDDC-SCL 6789 101112131415 2345 Pin No Name 5 10 15 1 6 11 2) S-VIDEO input (MINI DIN 4P): V I D E ...