Miele DA 2270 - Manuals

Technical safety ~ Before installation, check the cooker hood for visible signs of damage. Donot install and use a damagedappliance. It could be dangerous. ~ Before connecting the appliance to the mains supply, make sure that thevoltage and frequency details given onthe data plate correspond with th...

~ Do not connect the appliance to the mains electricity supply by amulti-socket adapter or an extensionlead. These do not guarantee therequired safety of the appliance (e.g.danger of overheating). ~ For appliances with an external fan motor (...EXT models) the connection ofthe two units must be made...

In order to ensure safe operation, andto prevent gases given off by theheating appliances from being drawnback into the room when the cookerhood and the heating appliance are inoperation simultaneously, anunderpressure in the room of 0.04 mbar(4 pa) is the maximum permissible. Ventilation can be mai...

Correct use ~ Never use an open flame beneath the cooker hood. To avoid the dangerof fire, do not flambé or grill over anopen flame.When switched on, the cooker hoodcould draw flames into the filter. Fatparticles drawn into the cooker hoodpresent a fire hazard. ~ When using the cooker hood over a ga...

The cooker hood works with . . . air extraction: The air is drawn in and cleaned by thegrease filters and directed outside. If the on-site ventilation system doesnot have a non-return flap , then the non-return flap supplied with theappliance must be fitted in the exhaustsocket in the motor unit. Th...

Joystick This is used to operate the fan settingsand the lighting. To switch the fan on ^ Press the joystick once to the right. The fan will come on at power level lI.The second fan power level indicatorlamp will light up. To select a power level ^ Press the joystick repeatedly to theright to select...

Filter operating hours counter The number of hours the appliance hasbeen in operation is stored in memory. The operating hours counter tells youwhen the grease filters or charcoalfilters need to be cleaned or replaced. Resetting the grease filter operatinghours counter After 30 hours of operation (o...

Activating and altering the charcoalfilter operating hours counter (in recirculation mode) The charcoal filters must be fitted forthe cooker hood to be used inrecirculation mode. On delivery, the operating hours counterfor the charcoal filter is deactivated . For recirculation mode, the operatinghou...

A range of Miele branded cleaning andconditioning agents are available toorder through your Miele Dealer /Chartered Agent, the Miele Spare PartsDepartment, or via the internet onwww.miele-shop.com. , Before any cleaning or maintenance work is carried out,disconnect the cooker hood from themains supp...

^ To take out the grease filters, releasethe locking clip on the filter, lower thefilter 45°, unhook it at the back andremove it. To avoid damaging the filters or thehob below, make sure you hold thefilters securely at all times whenhandling them. Cleaning the grease filters by hand ^ Clean the filt...

^ When removing the filters forcleaning, also clean off any residuesof oil or fat from the now accessiblehousing to prevent the risk of thesecatching fire. When putting the grease filters back inposition, ensure that the locking clipsare facing down towards the hob. ^ If a grease filter is inadverte...

Changing a halogen lamp Before any cleaning or maintenancework is carried out, disconnect thecooker hood from the mains supply. ^ Remove the grease filter. ^ Remove the charcoal filters if thecooker hood is being used inrecirculation mode. , Exercise caution when changing halogen lamps. They get ver...

In the event of a fault which you cannotcorrect yourself, or if the appliance isunder guarantee, please contact: – Your Miele Dealer / Chartered Agent or – The Miele Service Department (see back cover for address). When contacting your Dealer or Miele,please quote the model and serialnumber of your ...

*Cut-out dimensions A depth T of at least 25 mm must be provided at the back of the building-inniche. Safety distance between hob andcooker hood When planning the installation heightof your cooker hood, the minimum safety distance between the top of acooker or hob and the bottom of thecooker hood is...

Fitting the non-return flap (not needed for recirculation mode) ^ If a non-return flap is not present inthe venting system, the non-returnflap supplied must be fitted onto theexhaust socket in the motor unit. Theflaps must open upwards.DA 2250, DA 2270: 1 non-return flapDA 2210: 2 non-return flaps B...

Preparation for extraction ^ When using C 150 mm ducting, secure the exhaust connectionsupplied to exhaust ducting withhose clips. ^ If using C 125 mm ducting, fit the reducing collar into the exhaustconnection, and secure the exhaustducting to the reducing collar with ahose clip. (See "Connecti...

Recirculation If site conditions are not suitable for thecooker hood to be used with airextraction, the appliance must be setup for recirculation. For this, conversion kit DUU 151(available from your Miele dealer or theMiele Spare Parts Dept.) is required.One conversion kit is required for theDA 225...

Fitting the joystick 1. Screw the spring into the holder and tighten by hand. Whilst doing socounterhold the joystick with an SW 9spanner. Do not turn the spanner! 2. Then fit the middle section onto the spring and tighten by hand whilstcontinuing to counterhold thejoystick. Do not turn the spanner....

Electrical connection ^ If the cooker hood is to be connectedto an external motor (EXT models):Use the connection cable with 6 poleplug to connect the cooker hood andthe external motor. ^ Connect the appliance to the mainsvia a fused spur or fused socket asappropriate. Before connecting the applianc...

Important: To avoid the danger oftoxic fumes, please observe theWarning and Safety instructions.This is especially crucial when usingthe cooker hood at the same time asanother heating appliance whichrelies on air from the same room.The cooker hood should be installedaccording to local and nationalbu...

– If the exhaust air is to be ducted into the open air, the installation of atelescopic wall vent or roof vent(available as an optional accessory)is recommended. – If the exhaust air is to be ducted into a vent flue, the ducting must bedirected in the flow direction of theflue. Important: If the exh...

Silencer (optional accessory) To achieve even further reductions innoise levels, a special silencer can befitted in the ducting system. ...with air extraction: The silencer not only reduces noisefrom the fan, but also sounds fromoutside (e.g. traffic noise).For this reason the silencer must bepositi...

All electrical work should beundertaken by a suitably qualifiedand competent person in strictaccordance with current nationaland local safety regulations(BS 7671 in the UK). Installation, repairs and other workby unqualified persons could bedangerous, for which themanufacturer cannot be held liable....

The Miele DSM 400 control module canbe used to combine the cooker hoodwith other components. It enables the following: Potential free connection This can be used to operate a furtherappliance via the On/Off button s on the cooker hood. The potential free contact on theDSM 400 a can, for example, be ...

Total connected load*DA 2250, DA 2270. . . . . . . . . . . . 300 WDA 2210. . . . . . . . . . . . . . . . . . . . 780 W– Fan motor DA 2250, DA 2270 . . . . . . . . . . 200 WDA 2210 . . . . . . . . . . . . . . . 2 x 290 W – Hob lighting DA 2250, DA 2270 . . . . . . . . 2 x 50 WDA 2210 . . . . . . . . ...