Microsoft 340 - Manuals

7. In the window listing Manufacturers/Printers , click Have Disk . 8. In the Install From Disk dialog box, type in the drive for the Phaser 340 CD-ROM or for the Printer Software for Windows diskette, and click OK .

9. A list of Tektronix printers appears. Select your printer in the list, then click Next . ■ Select Tektronix Phaser 340 if you have the standard version of the printer with 17 fonts. ■ Select Tektronix Phaser 340 600 dpi if you have the printer ’s extended features option with 69 fonts. Note If yo...

Using printer options in the Windows 95 driver In the Printers window, click the Phaser 340 printer icon with the right mouse button, then select Properties from the menu. Click the following tabs to see printing options; refer to your Windows 95 documentation for information on other tabs and optio...

Details Click the Details tab to see the following options: ■ Set the Timeout settings . ■ Not Selected: Type a value of 0 , or between 15 and 999 , in this text box to change the number of seconds Windows waits before notifying you that a printer is off-line. The default is 15 seconds. ■ Transmissi...

Paper Click the Paper tab to see the following options: ■ Select a media size in the Paper size field. ■ Select a media tray or media type in the Paper source field. ■ Letter (U.S.) ■ A4 (metric) ■ AutoSelect Tray ■ Upper ■ Lower ■ Paper ■ Transparency ■ Manual Paper ■ Manual Transparency

Graphics Click the Graphics tab to see the following options: Note Use the Print Quality selections in the Device Options tab to select 300 x 300 dpi and 600 x 300 dpi options. Note If you are using host color correction, you need to make selections in the Graphics and Device Options tabs.

Device Options Click the Device Options tab to see the following options: ■ To select TekColor printer color corrections, follow these steps: a. Highlight Color Correction in the Printer features field. b. Select a color correction in the Change setting for: Color Correction field. ■ None ■ Vivid Co...

■ To select print quality modes, follow these steps: a. Highlight Print Quality in the Printer features field. b. Select a print quality mode in the Change setting for: Print Quality field. * These options are available only with the printer’s extended features option. ■ 300x300 dpi* ■ 600x300 dpi*

PostScript Click the PostScript tab to see the following options: ■ The PostScript header contains important PostScript information that must accompany each print job; it is not a banner page printed with each job. If an option is not selected, an error message is displayed on your computer screen a...

■ Click the Advanced button to see the following options. ■ Select Use PostScript Level 2 features. Click OK when finished. Note For faster printing, select Binary communications protocol under Data format. Source: 070-9099-01 C3