McIntosh XLS112 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY

2 IMPORTANT SAFETY INSTRUCTIONS! PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT. WARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. The lightning flash with arrowhead,within an equilateral triangle, is intendedto alert the user to the presence o...

Page 3 - Please take a short time to read the information in this; Table of Contents

3 Customer Service Technical Assistance Please Take A Moment Thank You Copyright 2004 © by McIntosh Laboratory, Inc. The serial number, purchase date and McIntosh Dealername are important to you for possible insurance claim orfuture service. The spaces below have been provided foryou to record that ...

Page 4 - woofer, a 400 watt amplifier and built-in high and; XLR Connectors; Connector Information

4 Introduction Important Information 1. The following Connecting Cable is available from the McIntosh Parts Department: Power Control Cable Part No. 170-202Six foot, 2 conductor shielded, with two 1/8 inch stereomini phone plugs. 2. For additional connection information, refer to the owner’s manual(...

Page 5 - Performance Features; The Phase Switch can be set to 0

5 Performance Features Important Information, Connector Information, Introduction and Performance Features • Patented LD/HP Technology The McIntosh Loudspeaker Element features the patentedLD/HP motor structure. This design, when compared toconventional Loudspeaker Elements, reduces distortionsignif...

Page 6 - Dimensions; Note: The XLS112 is supplied with optional adjustable feet,

6 The following dimensions can assist in determining thebest location for your XLS112 Powered Subwoofer. Thereis additional information on page 8 pertaining to installingthe XLS112. Dimensions Front View ofXLS112 withGrille Removed Rear View ofXLS112 Note: The XLS112 is supplied with optional adjust...

Page 7 - Bottom View of XLS112

7 Dimensions Top View of XLS112 Bottom View of XLS112 13 -1/10 " 33.27cm 10 -1/8 " 25.72cm 2 -7/8 " 7.30cm 9 -1/10 " 23.11cm 2" 5.08cm 15" 38.10cm 10 -5/8 " 26.99cm 2 -1/4 " 5.72cm Side View of XLS112

Page 8 - The optimal method for selecting speaker locations in-; Figure 2; Optional Feet

8 Installation Installation Locating the XLS112 Always provide adequate ventilation for the XLS112 Pow-ered Subwoofer. Cool operation ensures the longest pos-sible life for any electronic instrument. An installationshould provide at least 2 inches spacing on all sides of theXLS112, so airflow is not...

Page 9 - Rear Panel Connections

9 Rear Panel Connections Connect the XLS112 powercord to a live AC outlet. Referto information on the backpanel to determine the correctvoltage POWER CONTROL INreceives turn on/off sig-nals from a McIntoshcomponent and thePOWER CONTROL OUTsends the turn on/off sig-nal to the next McIntoshcomponent M...

Page 10 - How to Connect; Connect a power control cable from the McIntosh A/V; Connect a Balanced Audio Cable from the McIntosh; Notes: 1. If two or more McIntosh XLS112 Powered; Attach to the Front Panel the supplied Loudspeaker

10 How to Connect McIntosh Seven Channel Power Amplifier McIntosh A/V Control Center The McIntosh XLS112 Powered Subwoofer may be turnedOn or Off by two different methods. The preferred methodis to utilize the Power Control Signal from a McIntosh A/VControl Center or Audio Control Center. If the Pow...

Page 12 - Note: If the Control is set to maximun and additonal output is; When there is no Power Control Cable connected to the

12 How to Operate How to Operate Level Control Start with the LEVEL CONTROL in the center positionand perform the system level calibration on the A/V Con-trol Center or Surround Decoder forthe subwoofer level. If the subwooferlevel can not be set, adjust theXLS112’s LEVEL CONTROL toprovide adequate ...

Page 13 - Notes

Page 14 - 00 Watts Sine Wave Continuous Power

14 Specifications Specifications Driver Complement 12 inch LD/HP Woofer Frequency Response 35Hz to 200Hz (±3dB) Maximum Sound Pressure Level 115dB Power Output 400 Watts Sine Wave Continuous Power Total Harmonic Distortion (Power Ampfier) Maximum Total Harmonic Distortion at any power levelfrom 250 ...

Page 16 - Chambers Street

McIntosh Part No. 04092800 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 The continuous improvement of its products isthe policy of McIntosh Laboratory Incorporatedwho reserve the right to improve design withoutnotice. Printed in the U.S.A.