Mazda MX-5 - Manuals

1-1 Form No. 8S15-EA-03G 1 Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Dashboard Overview .................................................................... 1-2 Interior Overview .............................................................................

1-3 Your Vehicle at a Glance Form No. 8S15-EA-03G Interior Overview Vanity mirror Rearview mirror Seat belts Interior light Sunvisors Seats (page 6-59) (page 6-59) (page 2-4) (page 2-2) (page 6-59) (page 3-33) J07S_8S15-EA-03G_Edition2.book Page 3 Thursday, August 21, 2003 10:04 AM

1-4 Your Vehicle at a Glance Form No. 8S15-EA-03G Exterior Overview Door and keys Outside mirrors Side-marker lights Headlights Fuel-filler lid Tires Windshield wiper blades Washer fluid Hood Front turn signal lights/Parking lights Rear turn signal lights Brake lights/Taillights Power windows Rear w...

2-1 Form No. 8S15-EA-03G 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems. Seats ................................................................................................ 2-2 Seats ..................................

2-2 Essential Safety Equipment Form No. 8S15-EA-03G Seats ▼ Seat Slide To move a seat forward or backward, raise the lever and slide the seat to the desired position and release the lever. Make sure the lever returns to its original position and the seat is locked in place by attempting to push it f...

2-3 Essential Safety Equipment Seats Form No. 8S15-EA-03G ▼ Seat Recline To change the seatback angle, lean forward slightly while raising the lever. Then lean back to the desired position and release the lever. Make sure the lever returns to its original position and the seatback is locked in place...

2-4 Essential Safety Equipment Form No. 8S15-EA-03G Seat Belt Systems Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and passenger always wear seat belts. All of the seat belt retractors are designed to keep the lap/sh...

2-6 Essential Safety Equipment Seat Belt Systems Form No. 8S15-EA-03G ▼ Pregnant Women and Persons with Serious Medical Conditions Pregnant women should wear seat belts. Ask your doctor for specific recommendations.The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS.The shoulder ...

2-7 Essential Safety Equipment Seat Belt Systems Form No. 8S15-EA-03G ▼ Fastening the Seat Belts 1. Grasp the buckle and tongue. 2. Slowly pull out the lap/shoulder belt. 3. Insert the tongue into the buckle until you hear a click. 4. Make sure the shoulder belt is snugly fitted against your body. 3...

2-8 Essential Safety Equipment Seat Belt Systems Form No. 8S15-EA-03G ▼ Unfastening the Seat Belts Depress the button on the buckle. To secure the passenger's seat belt when not in use, insert the belt tongue into the slot. For optimum protection, the driver and passenger seat belts are equipped wit...

2-9 Essential Safety Equipment Seat Belt Systems Form No. 8S15-EA-03G Expended Seat Belt Pretensioners:Use of front seat belts with the pretensioner system expended is dangerous.The seat belt pretensioners will only function once. After they are expended, they will not work again and both must be re...

2-10 Essential Safety Equipment Seat Belt Systems Form No. 8S15-EA-03G ▼ Air Bag/Seat Belt Pretensioner System Warning Light If the air bag/seat belt pretensioner system is OK, the warning light illuminates when the ignition switch is turned to the ON position or after the engine is cranked. After a...

2-13 Essential Safety Equipment Form No. 8S15-EA-03G Child Restraint Mazda strongly urges the use of child-restraint systems for children small enough to use them. You are required by law to use a child-restraint system for children in the U.S. and Canada.Check your local and state or provincial law...

2-16 Essential Safety Equipment Child Restraint Form No. 8S15-EA-03G The passenger lap/shoulder belt can easily be converted into the automatic locking mode, which must be done to hold the child-restraint system.Some child-restraint systems also employ specially designed LATCH attachments; refer to ...

2-20 Essential Safety Equipment Form No. 8S15-EA-03G SRS Air Bags The supplemental restraint systems (SRS) include up to 2 air bags (verify "SRS AIRBAG" location indicator marks).They are located in: • The steering wheel hub • The passenger side dashboard The air bag supplemental restraint s...

2-21 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G Air Bags without Seat Belts:Depending only on the air bags for protection during an accident is dangerous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only in collisions with f...

2-23 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G Your vehicle is equipped with a passenger air bag deactivation switch. The switch is located in the center console. The switch must be used to deactivate the passenger air bag when the occupant of the passenger seat fits into one of t...

2-24 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G When the ignition switch is turned to the ON position, the passenger air bag deactivation indicator light comes on for about 6 seconds.If the passenger air bag deactivation switch is in the OFF position, the indicator light remains on...

2-25 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G ▼ To Ready The Passenger Air Bag 1. Insert the key into the switch. 2. Turn the key counterclockwise until the key points to ON. 3. Remove the key. 4. Make sure the air bag deactivation indicator light goes off after 6 seconds when th...

2-26 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G The supplemental restraint systems (SRS) have two basic subsystems: • The air bag system with inflators and air bags. • The electric system with crash sensors and diagnostic module. The air bags are mounted in the following locations:...

2-27 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G ▼ Air Bag Activation/Deactivation Air bag activation A greater than moderate impact will cause the air bags to inflate in the following cases: Hitting a solid wall straight on at greater than about 22 km/h (14 mph). Frontal impact wit...

2-28 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G Limitations to air bag activation Depending on the severity of impact, the air bags may not inflate in the following cases: Non-activation of air bags Air bags will not normally inflate in the following cases: Impacts involving trees ...

2-29 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G ▼ Constant Monitoring The following components of the air bag systems are monitored by a diagnostic system: • SAS unit • Crash sensor • Air bag modules • Seat belt pretensioners • Related wiring • Passenger air bag deactivation switch...

2-30 Essential Safety Equipment SRS Air Bags Form No. 8S15-EA-03G ▼ Maintenance The air bag systems do not require regular maintenance. But if any of the following occurs, take your vehicle to an Authorized Mazda Dealer as soon as possible: • The air bag system warning light flashes. • The air bag s...

3-1 Form No. 8S15-EA-03G 3 Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Doors and Locks ............................................................................ 3-2 Keys ............................................................

3-2 Knowing Your Mazda Form No. 8S15-EA-03G Doors and Locks The keys operate all locks. A code number is stamped on the plate attached to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key. Also write down the code number an...

3-3 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G This system locks and unlocks the doors and opens the trunk.It can also help you signal for attention in an emergency.Press the button slowly and accurately. Keyless Entry System* To avoid damage to the transmitter, do not: • Drop it. • Get...

3-4 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Transmitter Lock button To lock the doors, press the LOCK button and the hazard warning lights will flash once. To confirm that all the doors have been locked, press the LOCK button again within 5 seconds. If they are closed and locked, t...

3-5 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G Panic button You can use the button to turn on the alarm, which allows you to signal for attention in an emergency. Turning on the alarm Pressing the button once will trigger the alarm for about 2 minutes and 30 seconds, and do the followin...

3-6 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G Replacing the transmitter battery 1. Insert a small screwdriver into the slot and gently pry open the transmitter. 2. Press the portion of the battery indicated by A and remove the battery. 3. Install a new battery (CR2025 or the equivalent...

3-7 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Service If you have a problem with the keyless entry system, consult an Authorized Mazda Dealer. If your transmitter is lost or stolen, bring all remaining transmitters to an Authorized Mazda Dealer as soon as possible for a replacement a...

3-8 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Locking, Unlocking with Key Either door can be locked/unlocked with the key.Turn the key toward the front to unlock, toward the back to lock. ▼ Locking, Unlocking with Transmitter* The doors can be locked/unlocked by operating the keyless...

3-9 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Power Door Locks* Locking, unlocking with key Both doors lock automatically when either door is locked with the key. Both doors unlock when the driver’s door is unlocked and the key is held in the unlock position a second longer. Also, bo...

3-10 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Opening and Closing the Trunk Opening the trunk lid with the key Insert the key into the slot and turn it clockwise. Opening the trunk lid with the transmitter The trunk lid can be opened by operating the keyless entry system transmitter...

3-11 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G Opening the trunk lid with the remote release lever The remote trunk lid release is mounted in the center console.To open the console, unlock it and pull the release catch. To release the trunk lid, pull up on the trunk lid release lever. ...

3-12 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Trunk Light The trunk light is on when the lid is open and off when it's closed. Your vehicle is equipped with a trunk release handle that provides a means of escape for children and adults in the event they become locked inside the trun...

3-15 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Operating the Passenger Power Window To open the window to the desired position, hold down the switch.To close the window to the desired position, pull up the switch. Close Open Right window Fuel-Filler Lid and Cap Fuel Spray:Fuel spray ...

3-17 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Opening the Hood 1. With the vehicle parked, pull the release handle to unlock the hood. 2. Pull the hood latch up and lift the hood. 3. Use the support rod to hold the hood open. ▼ Closing the Hood 1. Check under the hood area to make c...

3-18 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Convertible Top Precautions Convertible Top Top latch assembley Top storage area Windshield header Top frame Top covering Top latch Unlock button Top latch assembly detail Standing in a Moving Vehicle:Standing in the vehicle, or sitting ...

3-19 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G • Before lowering or raising the top, stop in a safe place off the right-of-way and park on a level surface. • Make sure nothing is on the top or near the back window when raising or lowering the top. Even small objects may interfere and c...

3-20 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G 5. Push the unlock buttons and fully release the top latches. 6. Lift up on the front section of the top to release it from the windshield header. 7. Fold back the front and carefully lower it to the storage area, then put the latches in t...

3-21 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G 5. Insert the top covering’s rear edge into the groove in the body molding. ▼ Raising the Convertible Top 1. Park the vehicle on a level surface and firmly set the parking brake. 2. Lower the side windows, then turn off the ignition. 3. Pu...

3-22 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G 9. If the rear window defroster coupler is disconnected, connect the coupler. ▼ Taking Care of the Top Refer to convertible top maintenance (page 8-45) for information on taking care of the top. Make sure the top is securely locked by push...

3-23 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G ▼ Detachable Hardtop Precautions Detachable Hardtop* Top latch assembly Side latch assembly Rear deck latch Rear deck stud Rear window defroster coupler Standing in a Moving Vehicle:Standing in the vehicle, or sitting on the convertible to...

3-25 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G 5. Push the unlock buttons and fully release the side latches. 6. Disconnect the rear window defroster coupler. 7. Slide the hardtop rearward while pressing down on the rear deck latches to unlock the latches. 8. Lift the hardtop straight ...

3-27 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G 4. Unlock the top latches and the side latches on the hardtop. 5. Align the rear deck latches with the rear deck studs and set the hardtop squarely onto the body. 6. Slide the hardtop forward while pressing down on the rear deck latches to...

3-28 Knowing Your Mazda Doors and Locks Form No. 8S15-EA-03G 7. Push each top latch up with the palm of your hand until the lock buttons click and the latches are locked. 8. Push each side latch down with the palm of your hand until the lock buttons click and the latches are locked. 9. Reconnect the...

3-29 Knowing Your Mazda Form No. 8S15-EA-03G Security System The optional immobilizer system allows the engine to start only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent the theft of your veh...

3-32 Knowing Your Mazda Form No. 8S15-EA-03G Mirrors ▼ Outside Mirrors Check the mirrors’ angles before driving. Power control mirror The ignition switch must be in the ACC or ON position. To adjust: 1. Move the selector switch to the left or right to choose the mirror. 2. Depress the mirror switch ...

4-1 Form No. 8S15-EA-03G 4 Before Driving Your Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ......................................... 4-2 Fuel Requirements ..................................................................... 4-2Emission Control System .....

4-2 Before Driving Your Mazda Form No. 8S15-EA-03G Fuel and Engine Exhaust Precautions Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Your Mazda will perform best with fuel listed in the ...

4-3 Before Driving Your Mazda Fuel and Engine Exhaust Precautions Form No. 8S15-EA-03G Your vehicle is equipped with an emission control system (the catalytic converter is part of this system) that enables your vehicle to comply with existing exhaust emissions requirements. Emission Control System P...

4-5 Before Driving Your Mazda Form No. 8S15-EA-03G Before Starting the Engine • Be sure the windows, outside mirrors, and outside lights are clean. • Inspect inflation pressures and condition of tires. • Look under the vehicle for any sign of a leak. • If you plan to back up, make sure nothing will ...

4-6 Before Driving Your Mazda Form No. 8S15-EA-03G Driving Tips No special break-in is necessary, but a few precautions in the first 1,000 km (600 miles) may add to the performance, economy, and life of your Mazda. • Don’t race the engine. • Don’t maintain one constant speed for long. • Don’t drive ...

4-7 Before Driving Your Mazda Driving Tips Form No. 8S15-EA-03G When driving on ice or in water, snow, mud, sand, or similar hazard: • Be cautious and allow extra distance for braking. • Avoid sudden braking and quick steering. • If your vehicle is not equipped with ABS, brake with the pedal by usin...

4-8 Before Driving Your Mazda Driving Tips Form No. 8S15-EA-03G • Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt. Ask an Authorized Mazda Dealer to perform the following precautions: • Have the proper ratio of antif...

4-9 Before Driving Your Mazda Driving Tips Form No. 8S15-EA-03G ▼ Tire Chains Check local regulations before using tire chains. Install the chains on the rear tires.Don’t use chains on the front tires.Use only SAE Class "S" chains, and make sure they fit. Installing the chains 1. Remove the ...

4-11 Before Driving Your Mazda Form No. 8S15-EA-03G Towing Never tow a trailer with your Mazda. Trailer Towing J07S_8S15-EA-03G_Edition2.book Page 11 Thursday, August 21, 2003 10:04 AM

5-1 Form No. 8S15-EA-03G 5 Driving Your Mazda Explanation of instruments and controls. Starting and Driving ..................................................................... 5-2 Ignition Switch .......................................................................... 5-2Starting the Engine .......

5-2 Driving Your Mazda Form No. 8S15-EA-03G Starting and Driving ▼ Ignition Switch Positions LOCK The steering wheel locks to protect against theft. Only in this position can the key be removed. Manual transmission To turn the key from the ACC to the LOCK position, push the key in at the ACC positio...

5-3 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ACC (Accessory) The steering wheel unlocks and some electrical accessories will operate. ON This is the normal running position after the engine is started. The warning lights (except brakes) should be inspected before the engine is st...

5-4 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G 5. Turn the ignition switch to the START position and hold (up to 10 seconds at a time) until the engine starts. 6. After starting the engine, let it idle for about 10 seconds. ▼ Foot Brake Your Mazda has power-assisted brakes that adj...

5-5 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ▼ Parking Brake Setting the parking brake Depress the brake pedal, then pull the brake handle fully upward. Driving with the Engine Off:Continuing to drive when the engine is stalled or turned off is dangerous.Braking will require more...

5-6 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G Releasing the parking brake Depress the brake pedal, then pull the handle up and press the button. Lower the handle to the release position while holding in the button. ▼ Brake System Warning Light This warning has the following functi...

5-8 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ▼ ABS Warning Light* The warning light stays on for a few seconds when the ignition switch is turned to the ON position. If the ABS warning light stays on while you’re driving, the ABS control unit has detected a system malfunction. If...

5-10 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ▼ Recommendations for Shifting Upshifting For normal acceleration, we recommend these shift points. For cruising Downshifting When you must slow down in heavy traffic or on a steep upgrade , downshift before the engine starts to overw...

5-11 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ▼ Transmission Ranges The shift lever must be in P or N to operate the starter. P (Park) P locks the transmission and prevents the rear wheels from rotating. R (Reverse) In position R, the vehicle moves only backward. You must be at a...

5-12 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G 1 (Low) Use the 1 position for maximum power in hard-pulling situations, or for climbing and descending very steep grades.Do not exceed 59 km/h (36 mph) in the 1 position. ▼ Shift-Lock System The shift-lock system prevents shifting ou...

5-13 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ▼ Overdrive Overdrive operation In D, the transmission automatically shifts to overdrive, which improves fuel economy and reduces noise. To allow engine braking when going down a steep grade, make sure the overdrive button is in the o...

5-14 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ▼ Driving Tips Passing For extra power when passing another vehicle or climbing steep grades, depress the accelerator fully. The transmission will shift to a lower gear, depending on vehicle speed. Climbing steep grades from a stop To...

5-15 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G With cruise control, you can set and automatically maintain any speed of more than about 40 km/h (25 mph). ▼ Cruise Set Indicator Light This light comes on when a cruising speed is set. ▼ Activation/Deactivation To activate the system...

5-16 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ▼ To Set Speed 1. Activate the cruise control system. 2. Accelerate to the desired speed, which must be more than 40 km/h (25 mph). 3. Turn the control knob to SET/COAST and release it at the speed you want. Release the accelerator at...

5-17 Driving Your Mazda Starting and Driving Form No. 8S15-EA-03G ▼ To Decrease Cruising Speed Turn the control knob to SET/COAST and hold it. The vehicle will gradually slow.Release the knob at the speed you want. ▼ To Resume Cruising Speed at More Than 40 km/h (25 mph) If some other method besides...

5-18 Driving Your Mazda Form No. 8S15-EA-03G Instrument Cluster and Indicators 1 Speedometer .............................................................................................................. 5-192 Odometer, Trip Meter and Selector ...........................................................

5-19 Driving Your Mazda Instrument Cluster and Indicators Form No. 8S15-EA-03G ▼ Speedometer The speedometer indicates the speed of the vehicle. ▼ Odometer, Trip Meter and Selector The ignition switch must be in the ON position.The display mode can be changed from odometer to trip meter A to trip me...

5-20 Driving Your Mazda Instrument Cluster and Indicators Form No. 8S15-EA-03G ▼ Tachometer The tachometer shows engine speed in thousands of revolutions per minute (rpm). ▼ Engine Coolant Temperature Gauge The engine coolant temperature gauge shows the temperature of the engine coolant. If the need...

5-21 Driving Your Mazda Instrument Cluster and Indicators Form No. 8S15-EA-03G ▼ Fuel Gauge The fuel gauge shows approximately how much fuel is in the tank. We recommend keeping the tank over 1/4 full. When the low fuel warning light illuminates or when the needle is near E, refuel as soon as possib...

5-22 Driving Your Mazda Instrument Cluster and Indicators Form No. 8S15-EA-03G ▼ Dashboard Illumination When the headlight switch is in the or position, rotate the thumb-wheel to adjust the brightness of the dashboard lights. Dim Bright J07S_8S15-EA-03G_Edition2.book Page 22 Thursday, August 21, 200...

5-23 Driving Your Mazda Form No. 8S15-EA-03G Warning/Indicator Lights and Beeps Warning/Indicator Lights Signal Warning/Indicator Lights Page Brake System Warning Light 5-25 Charging System Warning Light 5-26 Check Engine Light 5-27 ABS Warning Light 5-27 Air Bag/Seat Belt Pretensioner System Warnin...

5-26 Driving Your Mazda Warning/Indicator Lights and Beeps Form No. 8S15-EA-03G ▼ Charging System Warning Light This warning light comes on when the ignition switch is turned to the ON position and goes off when the engine is started. If the warning light comes on while driving, it indicates a malfu...

5-27 Driving Your Mazda Warning/Indicator Lights and Beeps Form No. 8S15-EA-03G ▼ Check Engine Light If this light comes on while driving, the vehicle may have a problem. It is important to note the driving conditions when the light came on and consult an Authorized Mazda Dealer. The check engine li...

5-28 Driving Your Mazda Warning/Indicator Lights and Beeps Form No. 8S15-EA-03G ▼ Air Bag/Seat Belt Pretensioner System Warning Light If the air bag/seat belt pretensioner system is OK, the warning light illuminates when the ignition switch is turned to the ON position or after the engine is cranked...

5-29 Driving Your Mazda Warning/Indicator Lights and Beeps Form No. 8S15-EA-03G ▼ Immobilizer System Warning Light* If the immobilizer system is working properly, the light will come on when the ignition switch is turned to the ON or START position. The light will go out when confirmation by the imm...

5-30 Driving Your Mazda Warning/Indicator Lights and Beeps Form No. 8S15-EA-03G ▼ Turn-Signal/Hazard Warning Indicator Lights When operating the turn-signal lights, the left or right turn-signal indicator light flashes to indicate which turn-signal light is operating (page 5-32). When operating the ...

5-31 Driving Your Mazda Form No. 8S15-EA-03G Switches and Controls ▼ Headlights To turn on the lights, turn the headlight switch on the end of the control lever. ▼ Lights-On Reminder If lights are on and the key is removed from the ignition switch, a beep will sound when any door is opened. ▼ Headli...

5-32 Driving Your Mazda Switches and Controls Form No. 8S15-EA-03G ▼ Turn Signal Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed. If the indicator light continues to flash after a turn, manually retur...

5-34 Driving Your Mazda Switches and Controls Form No. 8S15-EA-03G ▼ Windshield Wipers Turn the wipers on by pulling the lever down. INT — Intermittent I — Normal II — Fast One-touch wipers For a single wiping cycle, push the lever forward and release it. ▼ Windshield Washer Pull the lever toward yo...

5-35 Driving Your Mazda Switches and Controls Form No. 8S15-EA-03G The rear window defroster clears frost, fog, and thin ice from the rear window. The ignition switch must be in the ON position. Press the switch to turn on the rear window defroster, the indicator light will illuminate. Press the swi...

6-1 Form No. 8S15-EA-03G 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audio system. Climate Control System ................................................................ 6-2 Operating Tips ................................................................

6-2 Interior Comfort Form No. 8S15-EA-03G Climate Control System ▼ Operating the Climate Control System Operate the climate control system with the engine running. ▼ Clearing the Air Inlet Clear all obstructions like leaves, snow and ice from the hood and the air inlet in the cowling grille to impro...

6-3 Interior Comfort Climate Control System Form No. 8S15-EA-03G ▼ Adjusting the Vents Directing airflow You can direct air flow by moving the adjustment knob. Vent Operation NOTE When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a result of humid ai...

6-4 Interior Comfort Climate Control System Form No. 8S15-EA-03G ▼ Selecting the Airflow Mode Dashboard and Floor Vents Defroster Vents Floor Vents Dashboard Vents Defroster and Floor Vents J07S_8S15-EA-03G_Edition2.book Page 4 Thursday, August 21, 2003 10:04 AM

6-5 Interior Comfort Climate Control System Form No. 8S15-EA-03G ▼ Control Switches Temperature control dial This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold. Fan control dial This dial allows variable fan speeds.0—Fan off1—Low speed2—Medium low speed3—Medium h...

6-6 Interior Comfort Climate Control System Form No. 8S15-EA-03G Mode selector dial Turn the mode selector dial to select airflow mode (page 6-4). A/C switch* Push the switch to turn the air conditioner on. The indicator light on the switch will illuminate when the fan control dial is set at positio...

6-7 Interior Comfort Climate Control System Form No. 8S15-EA-03G ▼ Heating 1. Set the mode selector dial to the position. 2. Set the air intake selector to the position. 3. Set the temperature control dial to the hot position. 4. Set the fan control dial to the desired speed. 5. If dehumidified heat...

6-8 Interior Comfort Climate Control System Form No. 8S15-EA-03G ▼ Ventilation 1. Set the mode selector dial to the position. 2. Set the air intake selector to the position. 3. Set the temperature control dial to the desired position. 4. Set the fan control dial to the desired speed. ▼ Windshield De...

6-9 Interior Comfort Form No. 8S15-EA-03G Audio System ▼ Power Antenna The antenna automatically rises when the radio is turned on, and lowers when it is turned off. ▼ Radio Reception AM characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere. There...

6-10 Interior Comfort Audio System Form No. 8S15-EA-03G Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signals cannot travel beyond the horizon. Therefore, FM stations cannot be received at the great di...

6-11 Interior Comfort Audio System Form No. 8S15-EA-03G Strong signal noise This occurs very close to a transmitter tower. The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver. Station drift noise When a vehicle reaches the area of two strong sta...

6-13 Interior Comfort Audio System Form No. 8S15-EA-03G • The MD player can also play MDLPs that have been recorded in MDLP mode. (MDLPs bearing the identification logo as shown below). • When inserting the MD, make sure the MD label is facing up, and the MD is oriented to the insertion slot in the ...

6-16 Interior Comfort Audio System Form No. 8S15-EA-03G Type A ......................................................................................................................... 6-17 Type B ..........................................................................................................

6-18 Interior Comfort Audio System Form No. 8S15-EA-03G ▼ Power/Volume/Sound Controls Power ON/OFF Turn the ignition switch to the ACC or ON position. Press the power/volume dial to turn the audio system on.Press the power/volume dial again to turn the audio system off. Volume adjustment To adjust t...

6-19 Interior Comfort Audio System Form No. 8S15-EA-03G With automatic level control *1 Depending on the mode selected, the indication changes. *2 If your vehicle is not equipped with rear speakers, adjust the power/volume dial so level is even. Without automatic level control *1 If your vehicle is ...

6-21 Interior Comfort Audio System Form No. 8S15-EA-03G Turn the audio control dial to select the desired mode. The selected mode will be indicated. BEEP setting The beep-sound when operating the audio system can be set on or off. J07S_8S15-EA-03G_Edition2.book Page 21 Thursday, August 21, 2003 10:0...

6-22 Interior Comfort Audio System Form No. 8S15-EA-03G ▼ Clock Setting the time The clock can be set at any time when the ignition switch is in the ACC or ON position. 1. To adjust the time, press the clock button ( ) for about 2 seconds until a beep is heard.The clock’s current time will flash. 2....

6-23 Interior Comfort Audio System Form No. 8S15-EA-03G Exact hour adjustment 1. To set the exact hour, press the clock button ( ) for about 2 seconds until a beep is heard.The clock’s current time will flash. 2. Press the clock button ( ) again and the time will be adjusted as follows:(Example) 12:...

6-24 Interior Comfort Audio System Form No. 8S15-EA-03G ▼ Operating the Radio Radio ON Press a band selector button ( ) to turn the radio on. Band selection Successively pressing the band selector button ( ) switches the bands as follows: FM1 → FM2 → AM. The selected mode will be indicated. If FM st...

6-25 Interior Comfort Audio System Form No. 8S15-EA-03G Seek tuning Pressing the seek tuning button ( , ) will cause the tuner to seek a higher or lower frequency automatically. Scan tuning Press the scan button ( ) to automatically sample strong stations. Scanning stops at each station for about 5 ...

6-26 Interior Comfort Audio System Form No. 8S15-EA-03G ▼ Operating the Cassette Tape Player* Cassette tape insert Insert the cassette tape into the slot, open edge to the right and cassette tape will begin play and "TAPE" will be displayed. At the end of the cassette tape, the unit automati...

6-27 Interior Comfort Audio System Form No. 8S15-EA-03G Ejecting the cassette tape Press the cassette tape eject button ( ) to eject the cassette tape. Fast-forward/Rewind Press the fast-forward button ( ) to fast-forward.Press the rewind button ( ) to rewind. To stop this operation and play the cas...

6-28 Interior Comfort Audio System Form No. 8S15-EA-03G ▼ Operating the Mini Disc (MD) Player* Inserting the MD Insert the MD, label-side up with the arrow pointed to the slot. The auto-loading mechanism will set the MD and begin play. There will be a short lapse before play begins while the player ...

6-30 Interior Comfort Audio System Form No. 8S15-EA-03G ▼ Operating the Compact Disc (CD) Player* Inserting the CD Insert the CD into the slot, label-side up. The auto-loading mechanism will set the CD and begin play. There will be a short lapse before play begins while the player reads the digital ...

6-31 Interior Comfort Audio System Form No. 8S15-EA-03G Track search Press the track up button ( ) once to skip forward to the beginning of the next track.Press the track down button ( ) once to skip back to the beginning of the current track. Music scan This feature helps to find a program by playi...

6-33 Interior Comfort Audio System Form No. 8S15-EA-03G Normal insertion 1. Press the load button ( ). 2. When "In" is displayed, insert the CD. Inserting CDs into desired tray number 1. Press and hold the load button ( ) for about 2 seconds until a beep is heard. 2. Press the channel preset...

6-35 Interior Comfort Audio System Form No. 8S15-EA-03G Music scan This feature helps to find a program by playing about the first 10 seconds of each track. Press the scan button ( ) during play to start scan play operation (the track number will flash).Press the scan button ( ) once again to cancel...

6-36 Interior Comfort Audio System Form No. 8S15-EA-03G ▼ Error Indications If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer. Indication Cause Solution CHECK MD MD is inserted upside d...

6-39 Interior Comfort Audio System Form No. 8S15-EA-03G Setting procedure 1. Begin with the audio unit off and the ignition switch is in the ACC position. 2. Press the auto memory button ( ) and the channel preset button 6 simultaneously for about 2 seconds until "CODE" is displayed. 3. Agai...

6-40 Interior Comfort Audio System Form No. 8S15-EA-03G Canceling code number 1. Begin with the audio unit off and the ignition switch is in the ACC position. 2. Press the auto memory button ( ) and the channel preset button 6 simultaneously for about 2 seconds until "CODE" is displayed. 3. ...

6-41 Interior Comfort Audio System Form No. 8S15-EA-03G Changing code number To change the code number, first cancel the number. Then set the new number by following the setting procedures. System activation When the power supply is disconnected or interrupted, the antitheft system is activated and ...

6-43 Interior Comfort Audio System Form No. 8S15-EA-03G Audio sound adjustment 1. Press the audio control dial to select the function. The selected function will be indicated. * If your vehicle is not equipped with rear speakers, adjust the power/volume dial so level is even. 2. Turn the audio contr...

6-56 Interior Comfort Audio System Form No. 8S15-EA-03G Disc search Press the disc up button ( ) to skip forward to the beginning of the next CD.Press the disc down button ( ) to skip back to the beginning of the previous CD. Music scan This feature helps to find a program by playing about the first...

6-59 Interior Comfort Form No. 8S15-EA-03G Interior Equipment When you need a sunvisor, lower it for use in front or swing it to the side. ▼ Vanity Mirror To use the vanity mirror, lower the sunvisor. ▼ Overhead Light Sunvisors Interior Light OFF Light off Center Light on when any door is open ON Li...

6-60 Interior Comfort Interior Equipment Form No. 8S15-EA-03G The ignition switch must be in the ACC or ON position.Press the lighter in and release it. When ready for use, it automatically pops out. To remove, open and pull up the ashtray. Lighter • Don’t touch the metal part of the lighter, you ma...

6-62 Interior Comfort Interior Equipment Form No. 8S15-EA-03G ▼ Glove Box To open the glove box, pull the latch toward you.Insert the key and turn it clockwise to lock, counterclockwise to unlock. ▼ Center Console To open, pull the release catch. The center console has a lockable lid, insert the key...

7-1 Form No. 8S15-EA-03G 7 In Case of an Emergency Helpful information on what to do in an emergency. Parking in an Emergency ............................................................. 7-2 Parking in an Emergency ........................................................... 7-2 Flat Tire .............

7-3 In Case of an Emergency Form No. 8S15-EA-03G Flat Tire Spare tire and tools are stored in the locations illustrated in the diagram. Spare Tire and Tool Storage Lug wrench Spare tire Jack handle Jack J07S_8S15-EA-03G_Edition2.book Page 3 Thursday, August 21, 2003 10:04 AM

7-4 In Case of an Emergency Flat Tire Form No. 8S15-EA-03G ▼ Jack To remove the jack Turn the wing bolt counterclockwise. To secure the jack Perform the removal procedure in reverse. ▼ Spare Tire Your Mazda has a temporary spare tire.The temporary spare tire is lighter and smaller than a conventiona...

7-5 In Case of an Emergency Flat Tire Form No. 8S15-EA-03G To remove the spare tire Turn the tire hold-down bolt counterclockwise with the lug wrench. If you have a flat tire, drive slowly to a level spot that is well off the road and out of the way of traffic to change the tire.Stopping in traffic ...

7-6 In Case of an Emergency Flat Tire Form No. 8S15-EA-03G 1. Park on a level surface off the right-of- way and firmly set the parking brake. 2. Put a vehicle with an automatic transmission in Park (P), a manual transmission in Reverse (R) or 1, and turn off the engine. 3. Turn on the hazard warning...

7-7 In Case of an Emergency Flat Tire Form No. 8S15-EA-03G 3. Insert the jack handle into the jack. 4. Turn the jack handle clockwise and raise the vehicle high enough so that the spare tire can be installed. Before removing the lug nuts, make sure your Mazda is firmly in position and that it cannot...

7-8 In Case of an Emergency Flat Tire Form No. 8S15-EA-03G ▼ Locking Lug Nuts* If your vehicle has optional antitheft wheel lug nuts, one on each wheel will lock the tires and you must use a special key to unlock them. This key is attached to the lug wrench and is stored with the spare tire. Registe...

7-9 In Case of an Emergency Flat Tire Form No. 8S15-EA-03G 3. Install the lug nuts with the beveled edge inward; tighten them by hand. 4. Turn the jack handle counterclockwise and lower the vehicle. Use the lug wrench to tighten the nuts in the order shown. If you’re unsure of how tight the nuts sho...

7-11 In Case of an Emergency Form No. 8S15-EA-03G Overheating If the temperature gauge indicates overheating, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot. If the temperature gauge indicates overheating: 1. Drive safely to the side of the road...

7-13 In Case of an Emergency Form No. 8S15-EA-03G Emergency Starting If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. Depress the accelerator all the way and hold it there. 2. Turn the ignition switch to the START position and hold it there—fo...

7-16 In Case of an Emergency Form No. 8S15-EA-03G Emergency Towing We recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed. A towed vehi...

7-17 In Case of an Emergency Emergency Towing Form No. 8S15-EA-03G ▼ Tiedown Hooks-Front ▼ Tiedown Hooks-Rear An example of “ recreational towing ” is towing your vehicle behind a motorhome.The transmission is not designed for towing this vehicle on all 4 wheels.When doing recreational towing refer ...

8-1 Form No. 8S15-EA-03G 8 Maintenance and Care How to keep your Mazda in top condition. Introduction ................................................................................... 8-2 Introduction ............................................................................... 8-2 Scheduled Mai...

8-2 Maintenance and Care Form No. 8S15-EA-03G Introduction Be extremely careful and prevent injury to yourself and others or damage to your vehicle when using this manual for inspection and maintenance. If you’re unsure about any procedure it describes, we strongly urge you to have a reliable and qu...

8-3 Maintenance and Care Form No. 8S15-EA-03G Scheduled Maintenance Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply.If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2). • Repeated short-distance driving • Driving in...

8-4 Maintenance and Care Scheduled Maintenance Form No. 8S15-EA-03G ▼ Schedule 1 I : Inspect and repair, clean, adjust, or replace if necessary. R: Replace L : Lubricate C: Clean ENGINE COOLING SYSTEM FUEL SYSTEM IGNITION SYSTEM CHASSIS and BODY * According to state / provincial and federal regulati...

8-5 Maintenance and Care Scheduled Maintenance Form No. 8S15-EA-03G ▼ Schedule 2 I : Inspect and repair, clean, adjust, or replace if necessary. R: Replace C: Clean ENGINE COOLING SYSTEM FUEL SYSTEM IGNITION SYSTEM ELECTRICAL SYSTEM * According to state / provincial and federal regulations, failure ...

8-7 Maintenance and Care Scheduled Maintenance Form No. 8S15-EA-03G Emission control and related systems The ignition and fuel systems are highly important to the emission control system and to efficient engine operation. Don’t tamper with them.All inspections and adjustments must be made by an Auth...

8-10 Maintenance and Care Form No. 8S15-EA-03G Owner Maintenance The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service...

8-13 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Recommended Oil Oil container labels provide important information. The quality designation SG, SH, SJ, SL, or ILSAC must be on the label. Engine oil viscosity, or thickness, has an effect on fuel economy and cold-weather operation (...

8-14 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G 5. Pull it out again and examine the level. It’s OK between L and F.But if it’s near or below L, add enough oil to bring the level to F. 6. Make sure the O-ring is positioned properly before reinserting the dipstick. The distance betwe...

8-15 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G Check the oil level and fill to the F mark if necessary. Oil capacity (General reference only, refer to Specifications section for capacities.) Changing oil filter Because you need a special tool to retighten the filter, an Authorized ...

8-16 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G Inspect the antifreeze protection and coolant level in the coolant reservoir at least once a year—at the beginning of the winter season—and before traveling where temperatures may drop below freezing. Inspect the condition and connecti...

8-17 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G To change coolant 1. Remove the cooling system cap. 2. Only when the engine is cool, remove the radiator drain plug and drain the coolant into a suitable container. Properly dispose of the used coolant. 3. Flush out the system with run...

8-18 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Inspecting Brake Fluid Level Inspect the fluid level in the reservoir regularly. It should be kept at MAX.The level normally drops with accumulated distance, a condition associated with wear of brake linings. If it is excessively low...

8-19 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Inspecting Clutch Fluid Level Inspect the level in the clutch fluid reservoir regularly. It should be kept at MAX. ▼ Adding Clutch Fluid If the fluid level is low, add fluid until it reaches MAX.Before adding fluid, thoroughly clean ...

8-20 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Inspecting Power Steering Fluid Level Inspect the fluid level at each engine oil change. Add fluid if necessary; it does not require periodic changing. The level must be kept between the H and L marks.Visually examine the lines and h...

8-21 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Inspecting Automatic Transmission Fluid Level The automatic transmission fluid level should be inspected regularly. Measure it as described below.The volume of fluid changes with the temperature. For that reason, it is best to examin...

8-22 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G Fluid cold scale When the vehicle has not been driven but the engine is idling, and the outside temperature is above 20°C (70°F), the fluid level should be close to, but not above, the bottom notch on the dipstick. Fully insert the dip...

8-23 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G Inspect fluid level in the washer fluid reservoir; add fluid if necessary. Use plain water if washer fluid is unavailable.But use only washer fluid in cold weather to prevent it from freezing. All moving points of the body, such as doo...

8-24 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G This air filter may be cleaned with compressed air and reused, or replaced, depending on its condition. Unless it is very dirty, simply shake it to remove foreign particles. Each time you inspect it, wipe inside the air cleaner housing...

8-25 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G Contamination of either the windshield or the blades with foreign matter can reduce wiper effectiveness. Common sources are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping prop...

8-26 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G 2. Hold the end of the rubber and pull until the tabs are free of the metal support. 3. Remove the metal stiffeners from the blade rubber and install them in new blades. 4. Carefully insert the new blade rubber. Then install the blade ...

8-27 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G The battery is in the trunk. ▼ Battery Maintenance To get the best service from a battery: • Keep it securely mounted. • Keep the top clean and dry. • Keep terminals and connections clean, tight, and coated with petroleum jelly or term...

8-28 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G For reasons of proper performance, safety, and better fuel economy, always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution. ▼ Tire Inflation Pressure Inspect all tire pr...

8-29 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Tire Rotation To equalize tread wear, rotate the tires every 12,000 km (7,500 miles)/8,000 km* (5,000 miles) or sooner if irregular wear develops. During rotation, inspect them for correct balance. * Unique driving conditions for USA...

8-30 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Replacing a Tire If a tire wears evenly, a wear indicator will appear as a solid band across the tread.Replace the tire when this happens. You should replace it before the band is across the entire tread. ▼ Temporary Spare Tire Inspe...

8-31 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Replacing a Wheel When replacing a wheel, make sure the new one is the same as the original factory wheel in diameter, rim width, and offset. Proper tire balancing provides the best riding comfort and helps reduce tread wear. Out-of-...

8-33 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G Your Mazda’s headlights and fog lights have replaceable halogen bulbs. ▼ Replacing Exterior Light Bulbs Replacing a headlight bulb 1. Make sure the ignition switch is turned off and the headlight switch is off. 2. Lift the hood and fin...

8-34 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G Replacing a fog light bulb* Due to the complexity and difficulty of the procedure, the bulbs should be replaced by an Authorized Mazda Dealer. Front turn signal lights/Parking lights 1. Turn the socket and bulb assembly counterclockwis...

8-35 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G Brake lights/Taillights, Rear turn signal lights, Reverse lights 1. Pull the center section of the plastic retainer and remove the retainers and remove the trunk end trim. 2. Turn the socket and bulb assembly counterclockwise and remov...

8-36 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G 4. Install the new bulb in the reverse order of removal. ▼ Replacing Interior Light Bulbs Overhead light 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the trim and gently insert it in the overhead light as shown...

8-38 Maintenance and Care Owner Maintenance Form No. 8S15-EA-03G ▼ Fuse Panel Description Fuse block (Engine compartment) DESCRIPTION FUSE RATING PROTECTED COMPONENT 1 HEAD 40A Headlights, Rear defroster, Auto antenna 2 FUEL INJ 30A Fuel injection 3 MAIN 100A For protection of all circuits 4 IG KEY ...

8-40 Maintenance and Care Form No. 8S15-EA-03G Appearance Care The paintwork on your Mazda represents the latest technical developments in composition and methods of application. Environmental hazards, however, can harm the paint’s protective properties, if proper care is not taken. Here are some ex...

8-41 Maintenance and Care Appearance Care Form No. 8S15-EA-03G ▼ Water Marks Occurrence Rain, fog, dew, and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicle and evaporates, the minerals will concentrate and harden to form...

8-42 Maintenance and Care Appearance Care Form No. 8S15-EA-03G Follow all label and container directions when using a chemical cleaner or polish. Read all warnings and cautions. ▼ Maintaining the Finish Washing To help protect the finish from rust and deterioration, wash your Mazda thoroughly and fr...

8-43 Maintenance and Care Appearance Care Form No. 8S15-EA-03G Pay special attention to removing salt, dirt, mud, and other foreign material from the underside of the fenders, and make sure the drain holes in the lower edges of the doors and rocker panels are clean. Insects, tar, tree sap, bird drop...

8-44 Maintenance and Care Appearance Care Form No. 8S15-EA-03G ▼ Bright-Metal Maintenance • Use tar remover to remove road tar and insects. Never do this with a knife or similar tool. • To prevent corrosion on bright-metal surfaces, apply wax or chrome preservative and rub it to a high luster. • Dur...

8-45 Maintenance and Care Appearance Care Form No. 8S15-EA-03G ▼ Aluminum Wheel Maintenance A protective coating is provided over the aluminum wheels. Special care is needed to protect this coating. ▼ Convertible Top Maintenance The convertible top is made of a special high-grade material, but if it...

8-46 Maintenance and Care Appearance Care Form No. 8S15-EA-03G Appearance(Polyvinyl only) Dress the top once a month after washing and drying it well. For best results, use a water-based leather treatment or vinyl top dressing. This will help maintain good appearance and material condition of the to...

8-47 Maintenance and Care Appearance Care Form No. 8S15-EA-03G ▼ Dashboard Precautions Prevent caustic solutions such as perfume and cosmetic oils from contacting the dashboard. They’ll damage and discolor it. If these solutions get on the dashboard, wipe them off immediately. ▼ Cleaning the Upholst...

8-48 Maintenance and Care Appearance Care Form No. 8S15-EA-03G ▼ Cleaning the Window Interiors If the windows become covered with an oily, greasy, or waxy film, clean them with glass cleaner. Follow the directions on the container. Don’t scrape or scratch the inside of the rear window. You may damag...

9-2 Customer Information and Reporting Safety Defects Form No. 8S15-EA-03G Customer Assistance Your complete and permanent satisfaction is our business. We are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.If you have any...

9-3 Customer Information and Reporting Safety Defects Customer Assistance Form No. 8S15-EA-03G In order to serve you efficiently and effectively, please help us by providing the following information: 1. Your name, address, and telephone number 2. Year and model of vehicle 3. Vehicle Identification ...

9-4 Customer Information and Reporting Safety Defects Customer Assistance Form No. 8S15-EA-03G ▼ Satisfaction Review Process Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In...

9-5 Customer Information and Reporting Safety Defects Customer Assistance Form No. 8S15-EA-03G Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer’s service facilities, personnel and equipment. We urge you to follow the above three steps in se...

9-6 Customer Information and Reporting Safety Defects Customer Assistance Form No. 8S15-EA-03G ▼ Regional Offices Provincial Administrators may be reached locally as listed below: Province/Territory CAMVAP Number British Columbia & Yukon Territories (604) 681-0312 Alberta & Northwest Territo...

9-7 Customer Information and Reporting Safety Defects Customer Assistance Form No. 8S15-EA-03G Your complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.If you have any questions or ...

9-8 Customer Information and Reporting Safety Defects Form No. 8S15-EA-03G Mazda Importer/Distributors ▼ U.S.A. Mazda North American Operations 7755 Irvine Center DriveIrvine, CA 92618-2922 U.S.A.P.O. Box 19734Irvine, CA 92623-9734 U.S.A.TEL:1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A...

9-9 Customer Information and Reporting Safety Defects Form No. 8S15-EA-03G Warranty • New Vehicle Limited Warranty • Distributor Major Component Limited Warranty (Canada only) • Safety Restraint System Limited Warranty • Anti-perforation Limited Warranty • Federal Emission Control Warranty (U.S.A. o...

9-13 Customer Information and Reporting Safety Defects Form No. 8S15-EA-03G Cell Phones Cell Phones Warning Use of Cell Phones and Other Devices by Driver:Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicl...

9-14 Customer Information and Reporting Safety Defects Form No. 8S15-EA-03G Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. National Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature ...

9-15 Customer Information and Reporting Safety Defects Uniform Tire Quality Grading System (UTQGS) Form No. 8S15-EA-03G These grades will be added to the sidewalls of passenger vehicle tires over the next several years according to a schedule established by the NHTSA and the tire manufacturers. The ...

9-16 Customer Information and Reporting Safety Defects Form No. 8S15-EA-03G Reporting Safety Defects Reporting Safety Defects NOTE If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to: Mazda North American Operations7755, Irvine Center DriveIrvine, Californ...

9-17 Customer Information and Reporting Safety Defects Form No. 8S15-EA-03G Service Publications Factory-authorized Mazda service publications are available for owners who wish to do some of their own maintenance and repair. When requesting any of our publications through an Authorized Mazda Dealer,...

10-1 Form No. 8S15-EA-03G 10 Specifications Technical information about your Mazda. Identification Numbers ............................................................... 10-2 Vehicle Information Labels ..................................................... 10-2 Specifications ..........................

10-2 Form No. 8S15-EA-03G Identification Numbers ▼ Vehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the left top side of the dashboard. This plate can easily be seen through the windshield. ▼ Motor Vehicle Safety St...

10-3 Identification Numbers Form No. 8S15-EA-03G ▼ Engine Number Front J07S_8S15-EA-03G_Edition2.book Page 3 Thursday, August 21, 2003 10:04 AM

10-4 Form No. 8S15-EA-03G Specifications ▼ Engine ▼ Electrical System ▼ Lubricant Quality * Refer to the recommended SAE viscosity numbers on page 8-13 . Specifications Item Model Type DOHC-16V in-line, 4-cylinder Bore×Stroke 83×85mm (3.3×3.4 in) Displacement 1,840 ml (1,840 cc, 112.2 cu in) Compres...

10-5 Specifications Form No. 8S15-EA-03G ▼ Capacities (Approximate Quantities) Check oil and fluid levels with dipsticks or reservoir gauges. ▼ Dimensions * With license plate holder ▼ Weights ▼ Air Conditioner Item Unit L US qt Imp qt Engine oil With oil filter 3.8 4.0 3.3 Without oil filter 3.6 3....

10-6 Specifications Form No. 8S15-EA-03G ▼ Light Bulbs Exterior light Interior light ▼ Tires Check the tire pressure label for tire size and inflation pressure. Refer to Tire Inflation Pressure on page 8-28 Standard tire Temporary spare tire ▼ Fuses Refer to the fuse rating on page 8-36 Light bulb W...

11-1 Form No. 8S15-EA-03G 11 Index J07S_8S15-EA-03G_Edition2.book Page 1 Thursday, August 21, 2003 10:04 AM