Mazda 2009 MX-5 Miata - Manuals

Black plate (7,1) 1 Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Interior Overview .......................................................................... 1-2 Interior Equipment (View A) .................................................... 1-2Interior E...

Black plate (8,1) Interior Equipment (View A) Door-lock knob .................................................................................................. page 3-31DSC OFF switch ............................................................................................... page 5-25Passenger a...

Black plate (11,1) Front Hood .................................................................................................................. page 3-42Windshield wiper blades .................................................................................... page 8-25Convertible top (Power retra...

Black plate (12,1) Rear Trunk lid ............................................................................................................ page 3-33Antenna ............................................................................................................. page 6-15Doors and keys .........

Black plate (13,1) 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags. Seats ............................................................................................... 2-2 Seats ..........................................

Black plate (14,1) Seats WARNING Do not modify or replace the frontseats: Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodifications could damage ...

Black plate (15,1) q Seat Recline WARNING Do not drive with either front seatreclined: Sitting in a reclined position while thevehicle is moving is dangerousbecause you do not get the fullprotection from seat belts. Duringsudden braking or a collision, youcan slide under the lap belt andsuffer serio...

Black plate (16,1) CAUTION When returning a rear-reclinedseatback to its upright position,make sure you hold onto theseatback with your other hand whileoperating the lever. If the seatback isnot supported, it will flip forwardsuddenly and could cause injury. q Height Adjustment (Driver's Seat) í By ...

Black plate (17,1) WARNING Ø Be careful when using the seatwarmer. The heat from the seatwarmer may be too hot for somepeople, as indicated below, andcould cause a low-temperatureburn. Ø Infants, small babies, elderlypeople, and physicallychallenged people Ø People with delicate skin Ø People who ar...

Black plate (18,1) Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and suddenstops. Mazda recommends that the driver and passenger always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the waywhe...

Black plate (19,1) WARNING Always wear your seat belt and make sure all occupants are properly restrained: Not wearing a seat belt is extremely dangerous. During a collision, occupants notwearing seat belts could hit someone or things inside the vehicle or even be thrownout of the vehicle. They coul...

Black plate (20,1) CAUTION Belt retraction may become difficult if the belts and seat belt guides are soiled, so tryto keep them clean. For more details about cleaning the seat belts, refer to “ Cleaning the Lap/Shoulder Belt Webbing ” (page 8-55). Seat belt guide q Pregnant Women and Persons with S...

Black plate (21,1) q Automatic Locking Mode To enable seat belt automatic locking mode, pull it all the way out and connect it asinstructed on the child-restraint system. It will retract down to the child-restraint systemand stay locked on it. If the LATCH lower anchors are not used alone for LATCH ...

Black plate (22,1) Seat Belt WARNING Always wear the seat belt with itcorrectly routed in its guide: Wearing a seat belt without the seatbelt routed in its guide is dangerousbecause the seat belt would not beable to provide adequate protectionin an accident, which could result inserious injury. Seat...

Black plate (23,1) WARNING Positioning the Lap Portion of the SeatBelt: The lap portion of the seat belt worntoo high is dangerous. In a collision,this would concentrate the impactforce directly on the abdominal area,causing serious injury. Wear the lapportion of the belt snugly and as lowas possibl...

Black plate (24,1) Seat Belt Pretensioner andLoad Limiting Systems For optimum protection, the driver andpassenger seat belts are equipped withpretensioner and load limiting systems.For both these systems to work properlyyou must wear the seat belt properly. Pretensioners: In moderate or severe fron...

Black plate (26,1) Seat Belt Extender If your seat belt is not long enough, evenwhen fully extended, a seat belt extendermay be available to you at no charge fromyour Authorized Mazda Dealer.This extender will be only for you and forthe particular vehicle and seat. Even if itplugs into other seat be...

Black plate (27,1) NOTE When not in use, remove the seat belt extenderand store it in the vehicle. If the seat beltextender is left connected, the seat beltextender might get damaged as it will notretract with the rest of the seat belt and caneasily fall out of the door when not in use andbe damaged...

Black plate (28,1) Driver seated/Passenger not seated The belt minder is a supplementalwarning to the seat belt warning function.If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, the warning light/beepoperates to give you further remindersaccording to the...

Black plate (29,1) Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children small enough to usethem. You are required by law to use a child-restraint system for children in the U.S. and Canada.Check your local and state or provincial laws for specific requirem...

Black plate (30,1) To reduce the chance of injuries caused by the deployment of the passenger air bag, thereare two methods to deactivate the passenger air bag for a child's safety as follows ― however the surest way to avoid the passenger air bag not deploying is to use the key andturn off the pass...

Black plate (31,1) Follow the manufacturer's instructions and always keep the child-restraint systembuckled down: An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Makesure any child-restrai...

Black plate (32,1) Seating a child in a child-restraint system on the passenger seat is dangerous: This vehicle is equipped with both a passenger seat weight sensor and a passengerair bag deactivation indicator light (page 2-43). Even with the passenger seat weightsensors, seating a child in a child...

Black plate (33,1) Never use one seat belt on more than one person at a time: Using one seat belt for more than one person at a time is dangerous. A seat beltused in this way cannot spread the impact forces properly and the two passengerscould be crushed together and seriously injured or even killed...

Black plate (37,1) LATCH Child-Restraint System Your Mazda is equipped with LATCH lower anchors for attachment of specially designedLATCH child-restraint systems behind the passenger seat that slide through the passengerseat when it is in the fully rearward position. Only LATCH junior seats and infa...

Black plate (40,1) Supplemental Restraint System (SRS) Precautions The front and side supplemental restraint systems (SRS) include up to 4 air bags. Please verify the air bags equipped on your vehicle by locating the “ SRS AIRBAG ” location indicators. These indicators are visible in the area where ...

Black plate (41,1) Carefully consider which child-restraint system is necessary for your child and follow theinstallation directions in this Owner's Manual as well as the child-restraint systemmanufacturer's instructions.Do not use a child-restraint system which employs an upper tether because there...

Black plate (44,1) Supplemental Restraint System Components Driver/Passenger dual stage inflators and air bagsCrash sensor, and diagnostic module (SAS unit)Seat belt pretensioner and load limiting systems (page 2-12)Front air bag sensorSide crash sensorsAir bag/seat belt pretensioner system warning ...

Black plate (45,1) How the SRS Air Bags Work Your Mazda is equipped with the following types of SRS air bags. SRS air bags aredesigned to work together with the seat belts to help to reduce injuries during an accident.The SRS air bags are designed to provide further protection for passengers in addi...

Black plate (47,1) q Air Bag/Seat Belt Pretensioner System Warning Light If the air bag/seat belt pretensioner system is working properly, the warning lightilluminates when the ignition switch is turned to the ON position or after the engine iscranked. The warning light turns off after a specified p...

Black plate (48,1) SRS Air Bag Deployment Criteria This chart indicates the applicable SRS equipment that will deploy depending on the typeof collision.(The illustrations are the representative cases of collisions.) SRS equipment Types of collision A severe frontal/near frontal collision A severe si...

Black plate (49,1) Limitations to SRS Air Bag In severe collisions such as those described previously in “ SRS Air Bag Deployment Criteria ” , the applicable SRS air bag equipment will deploy. However, in some accidents, the equipment may not deploy depending on the type of collision and its severit...

Black plate (51,1) Passenger Air Bag Deactivation Switch WARNING Do not deactivate the passenger air bag unnecessarily: Unnecessary deactivation of the passenger air bag is dangerous. If turned offunnecessarily, the passenger will not receive the added protection of the air bag.Serious injuries or e...

Black plate (53,1) q To Deactivate the Passenger Air Bag Before driving, always confirm that the passenger air bag deactivation switch is in theappropriate position according to your requirements. WARNING Do not leave the key in the front passenger air bag deactivation switch: (With advanced key) Un...

Black plate (54,1) The passenger front and side air bags and also the seat belt pretensioner system will remaindeactivated until the passenger air bag deactivation switch is turned to the ON position. q To Ready the Passenger Air Bag Before driving, always confirm that the passenger air bag deactiva...

Black plate (55,1) Driver and Passenger Occupant Classification System First, please read “ Supplemental Restraint System (SRS) Precautions ” (page 2-28) carefully. q Driver Seat Slide Position Sensor Your vehicle is equipped with a driver seat slide position sensor as a part of thesupplemental rest...

Black plate (56,1) Passenger air bag deactivation indicator light This indicator light illuminates to remind you that the passenger front and side air bags andseat belt pretensioner will not deploy during a collision. If the passenger weight sensors are normal, the indicator light illuminates when t...

Black plate (57,1) WARNING Do not decrease the total seated weight on the passenger seat: When an adult or large child sits on the passenger seat, decreasing the total seatedweight on the passenger seat from the total seated weight of approximately 42 kg(93 lbs) required for air bag deployment is da...

Black plate (58,1) Do not increase the total seated weight on the passenger seat: When an infant or small child sits on the passenger seat, increasing the total seatedweight on the passenger seat from the total seated weight of approximately 30 kg(66 lbs) is dangerous. The passenger seat weight sens...

Black plate (59,1) NOTE l The system requires about 10 seconds to alternate between turning the passenger front and sideair bags and seat belt pretensioner system on or off. l The passenger air bag deactivation indicator light may illuminate repeatedly if luggage or otheritems are put on the passeng...

Black plate (60,1) Monitoring and Maintenance q Constant Monitoring The following components of the air bag systems are monitored by a diagnostic system: l Crash sensors, and diagnostic module (SAS unit) l Front air bag sensor l Air bag modules l Side crash sensors í l Air bag/Seat belt pretensioner...

Black plate (61,1) WARNING Do not operate a vehicle with damaged air bag/seat belt pretensioner systemcomponents: Expended or damaged air bag/seat belt pretensioner system components must bereplaced after any collision which caused them to deploy or damage them. Only atrained Authorized Mazda Dealer...

Black plate (63,1) 3 Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustmentof various parts. Advanced Keyless Entry and Start System ................................ 3-2 Advanced Keys í ...................................................................... 3-...

Black plate (64,1) Advanced Keys í The advanced keyless functions (advanced keyless entry and start system) enables thefollowing operations while the advanced key is being carried (page 3-7). l Locking/unlocking the doors, and opening the trunk lid, without operating the key. l Starting the engine w...

Black plate (67,1) q Advanced Key Maintenance CAUTION Ø Make sure the battery is installedwith the correct pole facingupward. Battery leakage couldoccur if it is not installed correctly. Ø When replacing the battery, becareful not to bend the electricalterminals or get oil on them. Alsobe careful no...

Black plate (69,1) CAUTION Ø Be careful not to allow the rubberring shown in the figure to bescratched or damaged. Ø If the rubber ring detaches,reattach it before inserting a newbattery. Rubber ring q Service If you have a problem with the advancedkeyless functions, consult an AuthorizedMazda Deale...

Black plate (70,1) Opening the trunk lid The operational range for opening thetrunk lid is an area of up to 80 cm (2.6 ft)from the center of the trunk lid. Exterior transmitter Operational range Starting the engine The operational range for starting theengine includes nearly the entire cabinarea. Op...

Black plate (72,1) q Opening the Trunk Lid withRequest Switch The trunk lid can be opened by pressingthe request switch on the under side of thetrunk lid above the license plate while theadvanced key is being carried. Request switch NOTE l If the advanced key is left in the trunk, thetrunk lid will ...

Black plate (74,1) Starting the engine NOTE l Engine-starting is controlled by the sparkignition system.This system meets all CanadianInterference-Causing Equipment Standardrequirements regulating the impulseelectrical field strength of radio noise. l The advanced key must be carried becausethe adva...

Black plate (76,1) CAUTION When leaving the vehicle, make surethe ignition switch is turned to theLOCK position. NOTE l When turning the ignition switch to theLOCK position, the ignition switch has tobe pushed in from the ACC position andturned. Without being pushed in, theignition switch stops at t...

Black plate (77,1) Transmitter Lock button Unlock button Trunk button Operation indicator light Panic button NOTE The unlock button can be used to open thepower windows. Refer to Opening the PowerWindows from Outside (page 3-38). The operation indicator light flashes whenthe buttons are pressed. Loc...

Black plate (79,1) Declaration of Conformity Knowing Your Mazda Advanced Keyless Entry and Start System 3-17 MX-5_8Z78-EA-08K_Edition1 Page79Thursday, October 23 2008 1:52 PM Form No.8Z78-EA-08K

Black plate (80,1) q Auxiliary Key Function Use the auxiliary key stored in theadvanced key in the event of a deadtransmitter battery or malfunction. Removing the auxiliary key Pull out the auxiliary key from theadvanced key. Locking, unlocking the doors The doors can be locked/unlocked usingthe aux...

Black plate (81,1) Warning and Beep Sounds q System Malfunction Warning Beep If any malfunction occurs in the advancedkeyless function, the KEY warning light(red) in the instrument cluster illuminatescontinuously and beep sounds will beheard. CAUTION If the KEY warning light (red) remainsilluminated...

Black plate (82,1) q Request Switch InoperableWarning Beep If the request switch for a front door ispressed under the following conditionswhile the advanced key is being carried, abeep will be heard 6 times to indicate thatthe front doors cannot be locked. l A door is open (door ajar included). l Th...

Black plate (84,1) When Warning Indicator/Beep is Activated Under the following conditions, warning beeps are heard and a warning/indicator light inthe instrument cluster illuminates to notify the driver of improper operation of theadvanced key to prevent theft of the vehicle (page 3-19). Warning Wh...

Black plate (85,1) Keys (without Advanced Key) WARNING Do not leave the key in your vehiclewith children and keep them in a placewhere your children will not find orplay with them: Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. ...

Black plate (86,1) Key extend/retract method (Retractabletype key) To extend the key, press the releasebutton. To retract the key, rotate it into the holderwhile pressing the release button. Keyless Entry System (withRetractable Type Key) í This system remotely locks and unlocksthe doors, and opens ...

Black plate (88,1) NOTE (Without theft-deterrent system) The hazard warning lights will flash twice toindicate that both doors are unlocked. (With theft-deterrent system) The hazard warning lights only flash when thetheft deterrent system is turned off.The hazard warning lights do not flash unlessth...

Black plate (89,1) CAUTION Ø Install the battery with the positivepole ( ) facing down. Battery leakage could occur if it is notinstalled correctly. Ø When replacing the battery, becareful not to bend the electricalterminals or get oil on them. Alsobe careful not to get dirt in thetransmitter as it ...

Black plate (92,1) Door Locks WARNING Always take all children and pets withyou or leave a responsible person withthem: Leaving a child or a pet unattendedin a parked vehicle is dangerous. Inhot weather, temperatures inside avehicle can become high enough tocause brain damage or even death. Do not l...

Black plate (93,1) q Locking, Unlocking with Door-Lock Knob To lock any door from the inside, push thedoor-lock knob.To unlock, pull it out.This does not operate the other doorlocks. Lock Unlock To lock any door with the door-lock knobfrom the outside, push the door-lock knobto the lock position and...

Black plate (94,1) Locking, unlocking with key Both doors lock automatically when thedriver's door is locked with the key. Bothdoors unlock when the driver's door isunlocked and the key is held in the unlockposition for one second or longer. Unlock Lock NOTE Holding the key in the unlocked position ...

Black plate (95,1) Trunk Lid WARNING Never allow a person to ride in thetrunk: Allowing a person to ride in the trunkis dangerous. In addition, the personin the trunk could be seriouslyinjured or killed during suddenbraking or a collision. Keep the trunk closed when driving: Exhaust gas entering the...

Black plate (96,1) CAUTION Do not open the trunk while thepower retractable hardtop isopening/closing. The powerretractable hardtop and trunk lidmechanisms could be damaged. Opening the trunk lid with the requestswitch (with advanced key) The trunk lid can be opened by operatingthe request switch on...

Black plate (97,1) With the switch in the OFF position, theremote release button cannot be operated. To open the trunk lid when the switch isin the OFF position, do one of thefollowing: l Press the request switch on the trunklid. l Press the trunk button on thetransmitter. l Open the trunk with the ...

Black plate (99,1) Power Windows The ignition switch must be in the ONposition for the power windows tooperate. WARNING Make sure the opening is clear beforeclosing a window: Closing power windows aredangerous. A person's hands, head,or even neck could be caught by thewindow and result in serious in...

Black plate (101,1) Opening Because nobody likes getting into a veryhot car, we have introduced a way to get ahead start on cooling it, even before youput your seat belts on and insert your keyin the ignition. If you see the vehicle is ina secure area, you can open the bothwindows as you approach th...

Black plate (102,1) Fuel-Filler Lid and Cap WARNING When removing the fuel-filler cap,loosen the cap slightly and wait for anyhissing to stop. Then remove it: Fuel spray is dangerous. Fuel canburn skin and eyes and cause illnessif ingested. Fuel spray is releasedwhen there is pressure in the fueltan...

Black plate (104,1) Hood WARNING Always check that the hood is closedand securely locked: A hood that is not closed andsecurely locked is dangerous as itcould fly open while the vehicle ismoving and block the driver's visionwhich could result in a seriousaccident. q Opening the Hood 1. With the vehi...

Black plate (105,1) Convertible Top (Soft Top) í Windshield header Top latch assembly Top storage area Convertible top's handles Label (The label indicates the position where convertible top is to be held when lowering or raising it.) q Convertible Top Precautions WARNING Sit in the seat with the se...

Black plate (106,1) l Before lowering or raising theconvertible top, stop in a safe place offthe right-of-way and park on a levelsurface. l Make sure nothing is on the convertibletop or near the back window whenraising or lowering the convertible top.Even small objects may interfere andcause damage....

Black plate (108,1) q Raising the Convertible Top 1. Make sure the parking brake is applied. 2. Fully open the left and right windows. 3. Turn off the engine. 4. Pull the unlock lever outward to disengage the lock. Unlock lever 5. Standing outside of the vehicle, hold the convertible top along the c...

Black plate (109,1) CAUTION Driving with the convertible top notfully locked could damage theconvertible top.If the red indicator is visible on thelock release button, the convertibletop is not locked. After locking theconvertible top, verify that the redindicator is not visible. Locked position Unl...

Black plate (110,1) Convertible Top (Power Retractable Hardtop) í The power retractable hardtop opens/closes electrically by operating switches in thevehicle. When opening/closing the hardtop, the hardtop, deck and window glass operatetogether. The hardtop is stored in the storage area under the dec...

Black plate (111,1) q Power Retractable Hardtop Precautions WARNING Always confirm that there are no people around the vehicle before operating thehardtop: If the hardtop were to operate unexpectedly, it could result in an accident andserious injury from someone getting caught in the mechanism. Alwa...

Black plate (112,1) l Before opening or closing the hardtop, stop in a safe place off the right-of-way and parkon a level surface. l When opening the hardtop, make sure objects inside the vehicle are not blown away bythe wind. l Secure all loose objects inside before driving with the hardtop down. l...

Black plate (116,1) 10. Move the top latch slowly to make sure the anchor engages with thestriker, then rotate the top latch to thelock position until a click sound isheard. Striker Anchor CAUTION Driving with the hardtop not fullylocked could damage the hardtop.If the red indicator is visible on th...

Black plate (117,1) CAUTION Ø Do not drive the vehicle with thehardtop open halfway. Ø Do not perform the procedure in astrong wind as it could cause anunexpected accident. Ø Two adults are required toperform the procedure, especiallywhen lifting up the hardtop. Donot do it alone so as not to causei...

Black plate (120,1) 13. Lift up the deck using two adults, one on each side of the vehicle, and openthe deck completely. CAUTION Ø Lift the deck using two adults.Doing it alone could result ininjury or the deck lid mechanismbeing twisted which could damageit. Ø Do not let go of the deck lid onboth s...

Black plate (122,1) To the outside of the vehicle Rope Links NOTE Always route the one end of the rope to insideof the vehicle. If it is not inside the vehicle, itwill be difficult to service the hardtop at anAuthorized Mazda Dealer. 3. Do the same procedure on the other side. 4. Close the deck unif...

Black plate (125,1) Immobilizer System (withAdvanced Key) The immobilizer system allows the engineto start only with an advanced key thesystem recognizes. If someone attempts to start the enginewith an unrecognized advanced key, theengine will not start, thereby helping toprevent the theft of your v...

Black plate (128,1) q Operation Arming The system is armed when the ignitionswitch is turned from the ON position tothe ACC or LOCK position. The securityindicator light in the instrument clusterflashes every 2 seconds until the system isdisarmed. Disarming The system is disarmed when the ignitionsw...

Black plate (133,1) Theft-Deterrent System í If the theft deterrent system detects aninappropriate entry into the vehicle, whichcould result in the vehicle or its contentsbeing stolen, the alarm alerts thesurrounding area of an abnormality bysounding the horn and flashing the hazardwarning lights.Re...

Black plate (134,1) NOTE Locking the doors with the inside door-lockknob will not arm the system. q To Turn off an Armed System An armed system can be turned off by anyone of the following methods: l Unlock a door with the key. l Press the unlock button on the keylessentry system transmitter. l Inse...

Black plate (135,1) Steering Wheel WARNING Never adjust the steering wheel whilethe vehicle is moving: Adjusting the steering wheel whilethe vehicle is moving is dangerous.Moving it can very easily cause thedriver to abruptly turn to the left orright. This can lead to loss of controlor an accident. ...

Black plate (136,1) 2. Depress the mirror switch in the appropriate direction. Mirror switch Selector switch Outside mirror After adjusting the mirror, lock the controlby placing the selector switch in themiddle position. Folding the mirror Fold the outside mirror rearward until it isflush with the ...

Black plate (137,1) NOTE For the manual day/night mirror, perform theadjustment with the day/night lever in the dayposition. Reducing glare from headlights Manual day/night mirror Push the day/night lever forward for daydriving. Pull it back to reduce glare ofheadlights from cars at the rear. Night ...

Black plate (139,1) 4 Before Driving Your Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ........................................ 4-2 Fuel Requirements .................................................................... 4-2Emission Control System ............

Black plate (140,1) Fuel Requirements Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,which will reduce exhaust emissions and keep spark plug fouling to a minimum. Your Mazda will perform best with fuel listed in the table. Fuel Octane Rating * (Anti-knock index) Pre...

Black plate (141,1) Emission Control System Your vehicle is equipped with an emission control system (the catalytic converter is part ofthis system) that enables your vehicle to comply with existing exhaust emissionsrequirements. WARNING Never park over or near anything flammable: Parking over or ne...

Black plate (142,1) Engine Exhaust (Carbon Monoxide) WARNING Do not drive your vehicle if you smell exhaust gas inside the vehicle: Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which iscolorless, odorless, and poisonous. When inhaled, it can cause loss of consciousnessand...

Black plate (143,1) Before Getting In l Be sure the windows, outside mirrors,and outside lights are clean. l Inspect inflation pressures andcondition of tires. l Look under the vehicle for any sign offluid leaks. l If you plan to back up, make surenothing is in your way. NOTE Engine oil, engine cool...

Black plate (144,1) Break-In Period No special break-in is necessary, but a fewprecautions in the first 1,000 km (600miles) may add to the performance,economy, and life of your Mazda. l Do not race the engine. l Do not maintain one constant speed,either slow or fast, for a long period oftime. l Do n...

Black plate (145,1) Hazardous Driving WARNING Be extremely careful if it is necessary todownshift on slippery surfaces: Downshifting into lower gear whiledriving on slippery surfaces isdangerous. The sudden change in tirespeed could cause the tires to skid.This could lead to loss of vehiclecontrol a...

Black plate (146,1) Floor Mat WARNING Make sure the floor mats are hookedon the retention pins to prevent themfrom bunching up under the footpedals: Using a floor mat that is not securedis dangerous as it will interfere withthe accelerator and brake pedaloperation, which could result in anaccident. ...

Black plate (147,1) Winter Driving l Carry emergency gear, including tirechains, window scraper, flares, a smallshovel, jumper cables, and a small bagof sand or salt. Ask an Authorized Mazda Dealer toperform the following precautions: l Have the proper ratio of antifreeze inthe radiator.Refer to Eng...

Black plate (148,1) q Tire Chains Check local regulations before using tirechains. CAUTION Ø Chains may affect handling. Ø Do not go faster than 50 km/h (30mph) or the chain manufacturer'srecommended limit, whichever islower. Ø Drive carefully and avoid bumps,holes, and sharp turns. Ø Avoid locked-w...

Black plate (149,1) Overloading WARNING Be careful not to overload your vehicle: The gross axle weight rating (GAWR)and the gross vehicle weight rating(GVWR) of your vehicle are on theMotor Vehicle Safety Standard Labelon the driver's door frame. Exceedingthese ratings can cause an accidentor vehicl...

Black plate (150,1) Driving on Uneven Road Your vehicle's suspension and underbody can be damaged if driven on rough/uneven roadsor over speed bumps at excessive speeds. Use care and reduce speed when traveling onrough/uneven roads or over speed bumps. Use care not to damage the vehicle's underbody,...

Black plate (151,1) Trailer Towing The Mazda MX-5 is not designed fortowing. Never tow a trailer with yourMazda MX-5. Before Driving Your Mazda Towing 4-13 MX-5_8Z78-EA-08K_Edition1 Page151Thursday, October 23 2008 1:53 PM Form No.8Z78-EA-08K

Black plate (153,1) 5 Driving Your Mazda Explanation of instruments and controls. Starting and Driving ..................................................................... 5-2 Ignition Switch .......................................................................... 5-2Starting the Engine ............

Black plate (154,1) Ignition Switch Auxiliary key (with advanced key) NOTE When starting the engine using the advancedkey, refer to Starting the Engine (page 3-10). When starting the engine with theauxiliary key, perform the followingprocedure. 1. Remove the auxiliary key from the advanced key (page...

Black plate (155,1) Automatic Transmission Vehicle WARNING Remove the key only when the vehicleis parked: Removing the key from the ignitionswitch while the vehicle is moving isdangerous. Removing the key allowsthe steering wheel to lock. You willlose steering control and a seriousaccident could occ...

Black plate (156,1) ACC (Accessory) The steering wheel unlocks and someelectrical accessories will operate. ON This is the normal running position afterthe engine is started. The warning lights(except brakes) should be inspectedbefore the engine is started (page 5-40). NOTE When the ignition switch ...

Black plate (157,1) 6. After starting the engine, let it idle for about 10 seconds. NOTE l In extremely cold weather or after thevehicle has not been driven in several days,let the engine warm up without operatingthe accelerator. l Whether the engine is cold or warm, itshould be started without use ...

Black plate (158,1) WARNING Do not coast with the engine stalled orturned off, find a safe place to stop: Coasting with the engine stalled orturned off is dangerous. Braking willrequire more effort, and the brake'spower-assist could be depleted if youpump the brake. This will causelonger stopping di...

Black plate (159,1) Setting the parking brake Depress the brake pedal and then firmlypull the parking brake lever fully upwardswith sufficient force to hold the vehicle ina stationary position. Releasing the parking brake Depress the brake pedal and pull theparking brake lever upwards, then pressthe...

Black plate (160,1) NOTE Having to add brake fluid is sometimes anindicator of leakage. Consult an AuthorizedMazda Dealer as soon as possible even if thebrake light is no longer illuminated. WARNING Do not drive with the brake systemwarning light illuminated. Contact anAuthorized Mazda Dealer to hav...

Black plate (162,1) q Brake Pad Wear Indicator When the disc brake pads become worn,the built-in wear indicators contact thedisc plates. This causes a screeching noiseto warn that the pads should be replaced. When you hear this noise, consult anAuthorized Mazda Dealer as soon aspossible. WARNING Do ...

Black plate (163,1) (6-speed transmission) Vehicles with 6-speed transmission areequipped with a device to prevent shiftingto R (reverse) by mistake. Push the shiftlever downward and shift to R. WARNING Do not use sudden engine braking onslippery road surfaces or at highspeeds: Shifting down while d...

Black plate (164,1) For cruising Gear 5-speed transmission 6-speed transmission 1 to 2 15 km/h (9 mph) 18 km/h (11 mph) 2 to 3 29 km/h (18 mph) 32 km/h (20 mph) 3 to 4 47 km/h (29 mph) 44 km/h (27 mph) 4 to 5 61 km/h (38 mph) 56 km/h (35 mph) 5 to 6 ― 68 km/h (42 mph) Downshifting When you must slow...

Black plate (165,1) Automatic Transmission Controls Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ACC or ON position). Indicates the shift lever can be shifted freely into any position. Various Lockouts: NOTE The Sport AT has an option that is not inclu...

Black plate (166,1) q Transmission Ranges The shift lever must be in P or N tooperate the starter. P (Park) P locks the transmission and prevents therear wheels from rotating. WARNING Always set the shift lever to P and setthe parking brake: Only setting the shift lever to the Pposition without usin...

Black plate (167,1) q Shift-Lock System The shift-lock system prevents shiftingout of P unless the brake pedal isdepressed. To shift from P: 1. Depress and hold the brake pedal. 2. Start the engine. 3. Move the shift lever. NOTE l When the ignition switch is in the LOCKposition, the shift lever cann...

Black plate (168,1) NOTE If the gears cannot be shifted down whendriving at higher speeds, the gear positionindicator will flash twice to signal that thegears cannot be shifted down. Shifting You can shift gears up and down byoperating the shift lever or the steeringshift switches. NOTE l If the ste...

Black plate (169,1) Manually Shifting down (M6 → M5 → M4 → M3 → M2 → M1) To shift down to a lower gear, tap the shiftlever forward ( ) once. To shift down to a lower gear with thesteering shift switches, press either of theDOWN switches away from you oncewith your thumb. DOWN switches WARNING Do not...

Black plate (171,1) On a steep downgrade , downshifting helps maintain safe speed and prolongsbrake life. q Direct Mode í Direct mode can be used for temporarilyswitching gears by operating the steeringshift switch while the vehicle is beingdriven with the selector lever in the Drange.While in direc...

Black plate (172,1) Climbing steep grades from a stop To climb a steep grade from a stoppedposition: 1. Depress the brake pedal. 2. Shift to D or M1, depending on the load weight and grade steepness. 3. Release the brake pedal while gradually accelerating. Descending steep grades When descending a s...

Black plate (173,1) Cruise Control í With cruise control, you can set andautomatically maintain any speed of morethan about 30 km/h (19 mph). WARNING Do not use the cruise control under thefollowing conditions: Using the cruise control under thefollowing conditions is dangerousand could result in lo...

Black plate (174,1) 3. Press down the cruise control SET/- switch and release it at the speed youwant. Release the acceleratorsimultaneously. Cruise control switch Do not continue to hold the switch. Untilyou release it, speed will continue to drop(unless you continue to accelerate) andyou'll miss t...

Black plate (175,1) To increase speed using acceleratorpedal Depress the accelerator pedal to accelerateto the desired speed.Press down the cruise control SET/-switch and release it immediately. Cruise control switch NOTE Accelerate if you want to speed up temporarilywhen the cruise control is on. G...

Black plate (177,1) q TCS/DSC Indicator Light This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS or DSC isoperating, the indicator light flashes. If the light stays on, the TCS or DSC mayhave a malfunction and they may notoperate correctly...

Black plate (178,1) CAUTION Ø The DSC may not operate correctlyunless the following are observed: Ø Use tires of the correct sizespecified for your Mazda on allfour wheels. Ø Use tires of the samemanufacturer, brand and treadpattern on all four wheels. Ø Do not mix worn tires. Ø The DSC may not oper...

Black plate (179,1) q DSC OFF Switch Press the DSC OFF switch to turn off theTCS/DSC. The DSC OFF indicator lightwill illuminate. Press the switch again to turn the TCS/DSC back on. The DSC OFF indicatorlight will go out. NOTE l When DSC is on and you attempt to free thevehicle when it is stuck, or ...

Black plate (182,1) q Tire Pressure Monitoring SystemWarning Light This warning light illuminates for a fewseconds when the ignition switch is turnedto the ON position. Thereafter, the warning light illuminatesand a beep is heard when tire pressure istoo low in one or more tires, and flasheswhen the...

Black plate (184,1) If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture.Refer to Vehicle with run-flat tires onpage 7-3. Vehicles with Instant Mobility System(IMS) emergency flat tire repair kit If an emergency tire repair is needed,repair th...

Black plate (185,1) q Tires and Wheels CAUTION When inspecting or adjusting the tireair pressures, do not apply excessiveforce to the stem part of the wheelunit. The stem part could bedamaged. Changing tires and wheels The following procedure allows theTPMS to recognize a tire pressure sensor'suniqu...

Black plate (187,1) Meters and Gauges Speedometer ...................................................................................................... page 5-36Odometer, Trip Meter, Average Fuel Economy Display, Outside Temperature Displayand Selector .................................................

Black plate (188,1) q Speedometer The speedometer indicates the speed ofthe vehicle. q Odometer, Trip Meter, AverageFuel Economy Display, OutsideTemperature Display and Selector The ignition switch must be in the ONposition.Each time the selector is pressed thedisplay switches in the order of trip m...

Black plate (189,1) The trip meter records the total distancethe vehicle is driven until the meter isagain reset. Return it to “ 0.0 ” by holding the selector depressed for 1 second ormore. Use this meter to measure tripdistances and to compute fuelconsumption. NOTE l Only the trip meters record ten...

Black plate (190,1) Automatic Transmission Red zone CAUTION Do not run the engine with thetachometer needle in the RED ZONE.This may cause severe enginedamage. q Engine Coolant Temperature Gauge The engine coolant temperature gaugeshows the temperature of the enginecoolant. If the needle is near H, ...

Black plate (191,1) q Engine Oil Pressure Gauge Normal range Engine oil pressure is normal when theengine oil pressure gauge needle pointswithin the normal range. If the needle on the gauge doesn't moveafter starting the engine, follow steps 1through 3. If the engine oil pressure gauge moves toL (lo...

Black plate (192,1) Warning/Indicator Lights Warning/Indicator lights will appear in any of the highlighted areas Signal Warning/Indicator Lights Page Brake System Warning Light 5-42 Charging System Warning Light 5-43 Check Engine Light 5-44 ABS Warning Light 5-42 Air Bag/Seat Belt Pretensioner Syst...

Black plate (195,1) NOTE l When the engine is jump-started to chargethe battery, uneven rpm occurs and the ABSwarning light may illuminate. If this occurs,it is the result of the weak battery and doesnot indicate an ABS malfunction.Recharge the battery. l (With DSC vehicles) The brake assist system ...

Black plate (196,1) q Check Engine Light This indicator light illuminates when theignition switch is turned to the ONposition and turns off when the engine isstarted. If this light illuminates while driving, thevehicle may have a problem. It isimportant to note the driving conditionswhen the light i...

Black plate (198,1) Driver seated/Passenger seated The seat belt warning function remindsthe passenger to fasten the seat beltaccording to the chart below. Condition Vehicle speed Between 0 ― 20 km/h (0 ― 12 mph) 20 km/h (12 mph) or more Seat belt(Driver) Seat belt(Passenger) Indicator Beep : Fasten...

Black plate (201,1) If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture.Refer to Vehicle with run-flat tires onpage 7-3. Vehicles with Instant Mobility System(IMS) emergency flat tire repair kit If an emergency tire repair is needed,repair th...

Black plate (202,1) WARNING Do not drive the vehicle with the KEYwarning light illuminated: If the KEY warning light remainsilluminated, do not continue to driveusing the advanced key system. Parkthe vehicle in a safe place and usethe auxiliary key to continue drivingthe vehicle. Have the vehicleins...

Black plate (203,1) NOTE The advanced key can be set so that the KEYindicator light (green) does not flash even ifthe battery power is low.Refer to Setting Change (FunctionCustomization)(page 3-21). q Security Indicator Light This indicator light starts flashing every 2seconds when the ignition swit...

Black plate (204,1) Gear position indicator The gear position indicator displays thegear in use while in either manual shift ordirect mode. q TCS/DSC Indicator Light í This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS or DSC isoperating, ...

Black plate (205,1) Cruise Set Indicator Light (Green) The indicator light illuminates green whena cruising speed has been set. q Turn-Signal/Hazard WarningIndicator Lights When operating the turn signal lights, theleft or right turn signal indicator lightflashes to indicate which turn signal lighti...

Black plate (207,1) Lighting Control q Headlights To turn on the lights, turn the headlightswitch on the end of the control lever. Switch Position Headlights Off Off On TaillightsParking lightsLicense lightsSide-marker lightsDashboardillumination Off On On NOTE To prevent discharging the battery, do...

Black plate (208,1) q Headlight High-Low Beam Push the lever forward for high beam.Pull back to original position for lowbeam. High beam Low beam q Flashing the Headlights To flash the headlights, pull the lever fullytoward you. The headlight switch doesnot need to be on, and the lever will returnto...

Black plate (209,1) Turn and Lane-ChangeSignals q Turn Signal Move the signal lever down (for a leftturn) or up (for a right turn) to the stopposition. The signal will self-cancel afterthe turn is completed. If the indicator light continues to flashafter a turn, manually return the lever toits origi...

Black plate (210,1) Windshield Wipers andWasher The ignition switch must be in the ONposition. WARNING Use only windshield washer fluid orplain water in the reservoir: Using radiator antifreeze as washerfluid is dangerous. If sprayed on thewindshield, it will dirty thewindshield, affect your visibil...

Black plate (211,1) q Windshield Washer Pull the lever toward you and hold it tospray washer fluid. OFF Washer NOTE With the wiper lever in the OFF or INTposition, the wipers will operate continuouslyuntil the lever is released. If the washer does not work, inspect thefluid level (page 8-23). If it'...

Black plate (212,1) Horn To sound the horn, press the mark on the steering wheel. Hazard Warning Flasher The hazard warning lights should alwaysbe used when you stop on or near aroadway in an emergency. The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they mu...

Black plate (214,1) NOTE FCC ID: NZLOBIHL3CANADA:4112A-OBIHL3This device complies with FCC rules part 15.Operation is subject to the followingconditions:1- This device may not cause any harmfulinterference and2- This device must accept any interferencethat may be received including interferencethat ...

Black plate (216,1) Continue to press and hold the HomeLinkbutton while you press and release ― every two seconds ( “ cycle ” ) your hand- held transmitter until the frequency signalhas successfully been accepted byHomeLink. (The indicator light will flashslowly and then rapidly.)Proceed with “ Prog...

Black plate (217,1) 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audiosystem. Climate Control System ............................................................... 6-2 Operating Tips .......................................................................

Black plate (218,1) Operating Tips q Operating the Climate ControlSystem Operate the climate control system withthe engine running. NOTE To prevent the battery from being discharged,do not leave the fan control dial on for a longperiod of time with the ignition switch in theON position when the engi...

Black plate (219,1) Vent Operation Button q Adjusting the Vents Directing airflow You can direct air flow by rotating the vent. Opening/closing vents The two outside vents can be opened and closed with center button. NOTE When using the air conditioner, mist may come out from the vents. This is not ...

Black plate (220,1) q Selecting the Airflow Mode You will feel more comfortable by using the OPEN MODE when opening the roof. Dashboard Vents Floor Vents Defroster and Floor Vents Defroster Vents Dashboard Vents (OPEN MODE) Dashboard and Floor Vents (OPEN MODE) Floor Vents (OPEN MODE) 6-4 Interior C...

Black plate (221,1) Types of the Climate Control System Manual type and automatic type climate control systems are explained separately. Checkyour vehicle's climate control type and read the appropriate pages.Manual Type ..................................................................................

Black plate (222,1) Manual Type í Mode selector dial Temperature control dial Fan control dial Air intake selector A/C switch Some models. q Control Switches Temperature control dial Hot Cold This dial controls temperature. Turn itclockwise for hot and counterclockwisefor cold. Fan control dial Slow...

Black plate (223,1) Mode selector dial Turn the mode selector dial to selectairflow mode (page 6-4). NOTE Turn the mode selector dial to an OPENMODE position for maximum comfort whilethe roof is open. A/C switch í Press the A/C switch to turn the airconditioner on. The indicator light on theswitch w...

Black plate (224,1) Recirculated air mode (indicator lightilluminated) Outside air is shut off. Air within thevehicle is recirculated. This mode can be used when driving on adusty road or in similar conditions. It alsohelps to provide quicker cooling of theinterior. WARNING Do not use the recirculat...

Black plate (225,1) CAUTION When using the air conditioner whiledriving up long hills or in heavytraffic, closely monitor thetemperature gauge (page 5-38).The air conditioner may cause engineoverheating. If the gauge indicatesoverheating, turn the air conditioneroff (page 7-18). NOTE l When maximum ...

Black plate (228,1) q Control Switches Temperature control dial Hot Cold This dial controls temperature. Turn itclockwise for hot and counterclockwisefor cold. NOTE Turn the dial completely left to set thetemperature to maximum cooling, andcompletely right for maximum heating. Fan control dial Fast ...

Black plate (229,1) NOTE l The air conditioner may not function whenthe outside temperature approaches 0 °C(32 °F). l (Type B) When the mode is set to , or with the fan control dial in a position otherthan 0 and the temperature control dial inthe maximum cold position, the air intakeselector switche...

Black plate (230,1) q Windshield Defrosting and Defogging Set the mode selector dial to theposition and turn the fan control dial tothe desired speed.The outside air position is automaticallyselected. The air conditioner willautomatically turn on and directdehumidified air to the front windshieldand...

Black plate (231,1) Antenna q AM/FM Radio Antenna To remove the antenna, turn itcounterclockwise.To install the antenna, turn it clockwise.Make sure the antenna is securelyinstalled. Remove Install CAUTION To prevent damage to the antenna,remove it before entering a car washfacility or passing benea...

Black plate (232,1) Operating Tips for AudioSystem WARNING Do not adjust the audio controlswitches while driving the vehicle: Adjusting the audio while driving thevehicle is dangerous as it coulddistract your attention from thevehicle operation which could lead toa serious accident. Always adjust th...

Black plate (237,1) l Completely read the instruction manualand cautions for CD-R/CD-RWs. l Do not use discs with cellophane tapeadhering, partially peeled off labels, oradhesive material exuding from theedges of the CD label. Also, do not usediscs with a commercially-availableCD-R label affixed. Th...

Black plate (238,1) 05 06 01 02 04 03 1 5 4 2 3 Folder No. Level1 Level2 Level3 Level4 Playback may not occur in the above hierarchy depending on the audio unit. : Track (File) : Folder l The folder order is automaticallyassigned and this order cannot beoptionally set. l Any folder without an MP3 fi...

Black plate (239,1) Specialized glossary MP3 Abbreviation for “ MPEG Audio Layer 3 ” . A technical standard for audiocompression as decided by an ISO(International Organization forStandardization) MPEG working group.Use of MP3 allows for audio data to becompressed to approximately a tenth ofthe sour...

Black plate (240,1) Playable WMA file specification CD-R and CD-RW including WMA filescan be played with this unit. Discs whichconform to the following formats can beplayed.Playable WMA files are as follows: Item Content Specification Windows MediaAudio Version 7.0,8.0, 9.0 Samplingfrequency Bit rat...

Black plate (241,1) Audio Set CD player In-Dash CD Changer Power/Volume/Sound Controls .............................................................................. page 6-26Clock ...................................................................................................................... ...

Black plate (243,1) Standard audio-equipped model *1 *1 Bose Sound System-equipped model *1 *1 *1 Depending on the mode selected, the indication changes. 2. Turn the audio control dial to adjust the selected functions as follows: Standard audio-equipped model Indication Turn Left Turn Right Select m...

Black plate (244,1) NOTE About 5 seconds after selecting any mode, thevolume function will be automatically selected.To reset bass, treble, fade, and balance, pressthe audio control dial for 2 seconds. The unitwill beep and “ CLEAR ” will be displayed. Automatic Level Control (ALC) The automatic lev...

Black plate (246,1) q Clock Display Minute set button Hour set button Clock button Audio control dial Setting the time The clock can be set at any time when theignition switch is in the ACC or ONposition. 1. To adjust the time, press the clock button ( ) for about 2 seconds until a beep is heard.The...

Black plate (247,1) MEMO 6-31 MX-5_8Z78-EA-08K_Edition1 Page247Thursday, October 23 2008 1:53 PM Form No.8Z78-EA-08K

Black plate (248,1) q Operating the Radio Band selector button Seek tuning buttons Scan button Display Auto memory button Channel preset buttons Channel preset buttons Manual tuning dial Radio ON Press a band selector button ( ) to turn the radio on. Band selection Successively pressing the band sel...

Black plate (250,1) q Operating the Satellite Radio í Band selector button Seek tuning buttons Scan button Instant replay button Display Text button Category buttons Electronic serial number button Channel preset buttons Channel preset buttons Satellite button Manual tuning dial Information display ...

Black plate (255,1) Channel selection within a category If category is not in “ ALL ” and the channel number is displayed, turning themanual tuning dial moves the channelnumber up/down in the present category. l Turn the manual tuning dial clockwise:Channel Up l Turn the manual tuning dialcounterclo...

Black plate (256,1) l The long name is displayed first, andthree seconds later the short name isdisplayed. If there is no short name, thelong name is displayed. l To display the rest of the characters ofthe category name, press and hold thetext button (TEXT). The display scrollsthe next ten characte...

Black plate (262,1) q Operating the Compact Disc (CD) Player CD play button Display Repeat button CD eject button Play/Pause button Random button Folder up button CD slot Load button Folder down button Scan button Text button Track up/Fast-forward button Track down/Reverse button Type Playable data ...

Black plate (266,1) q Operating the In-Dash CD Changer Disc up/Folder up button Track down/Reverse button Channel preset buttons Text button Scan button Random button Disc down/Folder down button Track up/Fast-forward button Play/Pause button Load button CD slot Channel preset buttons Display CD pla...

Black plate (270,1) Message display If “ CHECK CD ” is displayed, it means that there is some CD malfunction. Checkthe CD for damage, dirt, or smudges, andthen properly reinsert. If the messageappears again, take the unit to anAuthorized Mazda Dealer for service. q Operating the Auxiliary jack You c...

Black plate (271,1) q Error Indications If you see an error indication on the display, find the cause in the chart. If you cannot clearthe error indication, take the vehicle to an Authorized Mazda Dealer. Indication Cause Solution CHECK CD CD is inserted upside down Insert the CD properly. If the er...

Black plate (272,1) Audio Control SwitchOperation í When the audio unit is turned on,operation of the audio unit from thesteering wheel is possible. NOTE Because the audio unit will be turned off underthe following conditions, the switches will beinoperable. l When the ignition switch is turned to t...

Black plate (273,1) q Changing the Source Press the mode switch ( ) to change the audio source (FM1 radio> FM2 radio>AM radio> CD player or CD changer>SIRIUS1> SIRIUS2> SIRIUS3> AUX>cyclical). NOTE CD, CD changer, and SIRIUS digital satelliteradio modes cannot be selected in ...

Black plate (274,1) q Mute Switch í Press the mute switch ( ) once to muteaudio, press it again to resume audiooutput. NOTE If the ignition switch is turned to the LOCKposition with the audio muted, the mute will becanceled.Therefore, when the engine is restarted, theaudio is not muted. To mute the ...

Black plate (275,1) CAUTION Noise may occur during playback ifthe accessory socket equipped on thevehicle is used. (If noise occurs, donot use the accessory socket.) NOTE l Before using the auxiliary jack, read themanufacturer's instructions for the productbeing connected. l Use a commercially-avail...

Black plate (276,1) Safety Certification This CD player is made and tested to meet exacting safety standards. It meets FCCrequirements and complies with safety performance standards of the U.S. Department ofHealth and Human Services. CAUTION Ø This CD player should not be adjusted or repaired by any...

Black plate (277,1) Bluetooth Hands-Free í q What is Bluetooth Hands-Free? Bluetooth Hands-Free Outline By connecting a Bluetooth equippedmobile telephone to the hands-free unitequipped on the vehicle, making andreceiving calls are possible using thevoice recognition/hands-free switchlocated on the ...

Black plate (278,1) NOTE l If the ignition switch is turned off during ahands-free call, the line is transferred to themobile telephone automatically. l If the mobile telephone is in a locationwhere radio reception is difficult such as ametal container or in the trunk, the call maynot be connected u...

Black plate (280,1) The hands-free system is activated.Functions of the hands-free telephone,such as making and receiving calls, can beused after the activation. (For details onthe telephone functions, refer to “ Basic Bluetooth Hands-Free Operation ” or “ Convenient Use of the Hands-Free System ” ....

Black plate (283,1) NOTE Depending on the device, the registrationstatus may be lost after a certain period oftime. If this occurs, repeat the entire processfrom Step 1. q Making a call using a telephonenumber NOTE Practice this while parked until you areconfident you can do it while driving in a no...

Black plate (284,1) q Help function use The help function informs the user of allthe available voice commands under thecurrent conditions. 1. Press the voice recognition/hands-free switch with a short press. 2. Say : [Beep] “ Help ” 3. Follow the prompts to receive the appropriate voice guidanceinst...

Black plate (285,1) 13. Prompt: “ Number, please. ” 14. Say: [Beep] “ XXXXXXXXXXX (Ex. “ 555-1234 ” ) ” (Say the phone number to be registered.) 15. Prompt: “ XXXXXXXXXXX (Ex. “ 555-1234 ” ) (Phone number registration). Is this correct? ” 16. Say: [Beep] “ Yes ” 17. Prompt: “ Number saved. Would you...

Black plate (286,1) q Mute The microphone can be muted during acall. 1. Press the voice recognition/hands-free switch with a short press. 2. Say: [Beep] “ Mute ” 3. Prompt: “ Microphone muted ” Canceling mute 1. Press the voice recognition/hands-free switch with a short press. 2. Say: [Beep] “ Mute ...

Black plate (287,1) NOTE Do this function only when parked. It is toodistracting to attempt while driving and youmay make too many errors to be effective. 1. Press the voice recognition/hands-free switch with a short press. 2. Say: [Beep] “ Phone book ” 3. Prompt: “ Select one of the following: new ...

Black plate (289,1) 6. Prompt: “ End of list, would you like to start from the beginning? ” 7. Say: [Beep] “ No ” 8. Prompt: “ Returning to main menu. ” Hands-Free Telephone Setting q Mobile phone Mobile phone registration For the registration of a Bluetoothequipped mobile telephone to BluetoothHand...

Black plate (291,1) 8. Say: [Beep] “ 2 ” (Say the order of priority of the mobile phone to bedeleted.) NOTE Say “ All ” to delete all mobile phones. 9. Prompt: “ Removing XXXXX... (Ex. phone B...) (Registered phone tag). Isthis correct? ” 10. Say: [Beep] “ Yes ” 11. Prompt: “ Deleted ” q Security se...

Black plate (294,1) When Bluetooth Hands-Free cannot be used Bluetooth Hands-Free cannot be usedunder the following conditions: l The mobile telephone is outside of thecommunication area. l The mobile telephone has amalfunction. l The mobile telephone is not connectedto the hands-free unit equipped ...

Black plate (296,1) Sunvisors When you need a sunvisor, lower it foruse in front. q Vanity Mirrors To use the vanity mirror, lower thesunvisor. Interior Lights q Overhead Light Switch Position Overhead Light Light off Light is on when any door is open Light on q Trunk Light Switch Position Trunk Lig...

Black plate (297,1) Cup Holder WARNING Never use a cup holder to hold hotliquids while the vehicle is moving: Using a cup holder to hold hot liquidswhile the vehicle is moving isdangerous. If the contents spill, youcould be scalded. Do not put anything other than cups ordrink cans in cup holders: Pu...

Black plate (298,1) Storage Compartments WARNING Keep storage boxes closed whendriving: Driving with the storage boxes openis dangerous. To reduce thepossibility of injury in an accident ora sudden stop, keep the storageboxes closed when driving. CAUTION Do not leave lighters or eyeglasses inthe sto...

Black plate (299,1) 3. If your vehicle has a lid, pull the latch to open. When finished, return the seat to itsoriginal position and secure it. Afterreturning the seat to its original position,make sure the seat is secured byattempting to lightly move it forward andbackward. CAUTION Do not store exc...

Black plate (300,1) Windblocker This windblocker reduces rear wind blastinto the cabin when driving with theconvertible top down.To use the windblocker, lift it upright. 6-84 Interior Comfort Interior Equipment MX-5_8Z78-EA-08K_Edition1 Page300Thursday, October 23 2008 1:54 PM Form No.8Z78-EA-08K

Black plate (301,1) 7 In Case of an Emergency Helpful information on what to do in an emergency. Parking in an Emergency ............................................................. 7-2 Parking in an Emergency .......................................................... 7-2 Flat Tire ...................

Black plate (302,1) Parking in an Emergency The hazard warning lights should alwaysbe used when you stop on or near aroadway in an emergency. The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it. Depress the hazard warni...

Black plate (303,1) Flat Tire í Either run-flat tires or conventional tiresare equipped on your Mazda dependingon the specification, therefore theprocedure for repairing a flat tire differsdepending on the type of tire. Beforedriving, make sure which type of tire isequipped on your Mazda. If you can...

Black plate (304,1) Maximum vehicle speed with apunctured run-flat tire: 90 km/h (55mph)Maximum driving distance with apunctured rum-flat tire: 80 km (49miles) CAUTION The maximum driving distance maybe shorter depending on the drivingconditions. If a run-flat tire is punctured, carefullydrive the v...

Black plate (305,1) Tool Storage Tools are stored in the locations illustrated in the diagram. Towing/Tiedown eyelet Power retractable hardtop emergency tool bag Tool bag rope Glove box Lug wrench Jack Jack Lever eyebolt hexagonal wrench Some models. Instant Mobility System (IMS) Emergency Flat Tire...

Black plate (306,1) q Jack To remove the jack 1. Turn the knob and remove the cover. 2. Turn the wing bolt and jack screw counterclockwise. Wing bolt Jack screw To secure the jack 1. Insert the wing bolt into the jack with the jack screw pointing back and turnthe wing bolt clockwise to temporarilyti...

Black plate (308,1) NOTE l The tire sealant cannot be reused. Purchasenew tire sealant at an Authorized MazdaDealer. l The emergency flat tire repair kit cannot beused in the following cases.Consult an Authorized Mazda Dealer. l The period of effective use for the tiresealant has expired. (The perio...

Black plate (309,1) NOTE The tire sealant can be used at outsidetemperatures down to _ 30°C ( _ 22°F). In extremely cold temperatures (0°C (32°F) orbelow), the tire sealant hardens easily andinjection of the sealant will be difficult. Warmthe sealant inside the vehicle before doing theinjection work...

Black plate (310,1) 10. Hold the bottom of the bottle upright, squeeze the bottle with your hands,and inject the entire amount of tiresealant into the tire. Valve NOTE The tire sealant cannot be reused. Purchase anew tire sealant kit at an Authorized MazdaDealer. 11. Pull out the injection hose from...

Black plate (311,1) 14. Install the compressor hose to the tire valve. Valve Compressor hose 15. Insert the compressor plug into the interior accessory socket and turn theignition switch to the ACC position(page 6-83). Compressor plug Center console Compressor CAUTION Ø Before pulling out the compre...

Black plate (312,1) 18. Install the tire valve cap. 19. Put the emergency flat tire repair kit in the trunk and continue driving. CAUTION Ø Drive carefully to an AuthorizedMazda Dealer and keep thevehicle speed below 80 km/h (50mph). Ø If the vehicle is driven 80 km/h (50mph) or higher, the vehicle ...

Black plate (313,1) Changing a Tire WARNING Be sure to follow the directions forchanging a tire, and never get under avehicle that is supported only by a jack: Changing a tire is dangerous if notdone properly. The vehicle can slip offthe jack and seriously injuresomeone. Never allow anyone inside a ...

Black plate (314,1) q Removing a Tire 1. Loosen the lug nuts by turning them counterclockwise one turn each, butdon't remove any until the tire has beenraised off the ground. 2. Place the jack under the jacking position closest to the tire beingchanged. Jacking position WARNING Use only the front an...

Black plate (315,1) 4. Turn the jack handle clockwise and raise the vehicle high enough so thatthe tire can be installed. Beforeremoving the lug nuts, make sure yourMazda is firmly in position and that itcannot slip or move. 5. Remove the lug nuts by turning them counterclockwise, then remove thewhe...

Black plate (316,1) To install the nut 1. Place the key on top of the nut, and be sure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench. 2. Place the lug wrench on top of the key, apply pressure, and turn it clockwise. q Mou...

Black plate (317,1) If you're unsure of how tight the nutsshould be, have them inspected at anAuthorized Mazda Dealer. Nut tightening torque N·m (kgf·m, ft·lbf) 88 ― 118 (9 ― 12, 65 ― 87) WARNING Always securely and correctly tightenthe lug nuts: Improperly or loosely tightened lugnuts are dangerous...

Black plate (318,1) Overheating If the temperature gauge indicatesoverheating, the vehicle loses power, oryou hear a loud knocking or pingingnoise, the engine is probably too hot. WARNING Turn off the ignition switch and make sure the fan is not running beforeattempting to work near the coolingfan: ...

Black plate (320,1) Starting a Flooded Engine If the engine fails to start, it may beflooded (excessive fuel in the engine). Follow this procedure: 1. If the engine does not start within five seconds on the first try, turn the key tothe LOCK position, wait ten secondsand try again. 2. Depress the ac...

Black plate (321,1) Jump-Starting Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If youfeel unsure about jump-starting, we strongly recommend that you have a competent servicetechnician do the work. WARNING Follow These Precautions Carefully: To ensure safe and co...

Black plate (324,1) NOTE l Before installing the battery cover, makesure both of the cables connecting thenegative battery terminal (right side ofbattery) are connected with the cablesrouted toward the right and back of thebattery as shown in the figure. l Verify that the covers are securely install...

Black plate (325,1) Towing Description We recommend that towing be done onlyby an Authorized Mazda Dealer or acommercial tow-truck service. Proper lifting and towing are necessary toprevent damage to the vehicle.Government and local laws must befollowed. A towed vehicle usually should have itsdrive ...

Black plate (326,1) Tiedown Hooks CAUTION Don't use the tiedown hooks underthe front and rear for towing.They are designed ONLY for tyingdown the vehicle when it's beingtransported. Using them for towingwill damage the bumper. q Tiedown Hooks 1. Remove the tiedown eyelet, lug wrench, and jack lever ...

Black plate (327,1) 3. Securely install the tiedown eyelet using the lug wrench. Front Lug wrench Lug wrench Rear 4. Hook the tying rope to the tiedown eyelet. Front Rear CAUTION Ø If the tiedown eyelet is not securelytightened, it may loosen ordisengage from the bumper whentying down the vehicle. M...

Black plate (328,1) Recreational Towing An example of “ recreational towing ” is towing your vehicle behind a motorhome.The transmission is not designed fortowing this vehicle on all 4 wheels.When doing recreational towing refer to “ Towing Description ” (page 7-25) and “ Tiedown Hooks ” (page 7-26)...

Black plate (329,1) 8 Maintenance and Care How to keep your Mazda in top condition. Introduction .................................................................................. 8-2 Introduction ............................................................................... 8-2 Scheduled Maintenan...

Black plate (330,1) Introduction Be extremely careful and prevent injury to yourself and others or damage to your vehiclewhen using this manual for inspection and maintenance. If you're unsure about any procedure it describes, we strongly urge you to have a reliableand qualified service shop perform...

Black plate (331,1) Scheduled Maintenance (USA, Canada, and Puerto Rico) Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply. l Repeated short-distance driving l Driving in dusty conditions l Driving with extended use of brakes l Driving in areas where sal...

Black plate (332,1) q Schedule 1 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60 ENGINE Drive belts I Engine valve clearance Audibly inspect every 120,000 km (...

Black plate (334,1) q Schedule 2 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 96 ×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60 ENGINE Drive belts I Engine valve clearance Audibly ...

Black plate (343,1) Owner Maintenance Schedule The owner or a qualified service technician should make these vehicle inspections at theindicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified servicetechnician as soon ...

Black plate (344,1) Owner Maintenance Precautions Improper or incomplete service may result in problems. This section gives instructions onlyfor items that are easy to perform. As explained in the Introduction (page 8-2), several procedures can be done only by aqualified service technician with spec...

Black plate (345,1) Engine Compartment Overview Engine oil dipstick Engine oil filler cap Brake fluid reservoir / Clutch fluid reservoir Washer fluid reservoir Cooling system cap Battery Engine coolant reservoir Power steering fluid cap Air filter Fuse block Maintenance and Care Owner Maintenance 8-...

Black plate (346,1) Engine Oil NOTE Changing the engine oil should be done by anAuthorized Mazda Dealer. q Recommended Oil Use SAE 5W-20 engine oil. Oil container labels provide importantinformation.A chief contribution this type of oil makesto fuel economy is reducing the amount offuel necessary to...

Black plate (347,1) The quality designation SM, or ILSACmust be on the label. 5W-20 120 100 80 60 40 20 0 –20 50 40 30 20 10 0 –10 –20 –30 q Inspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 2. Warm up the engine to normal operating temperature. 3. Turn it off and wait at lea...

Black plate (348,1) Engine Coolant q Inspecting Coolant Level WARNING Do not use a match or live flame in theengine compartment. DO NOT ADDCOOLANT WHEN THE ENGINE IS HOT: A hot engine is dangerous. If theengine has been running, parts of theengine compartment can becomevery hot. You could be burned....

Black plate (351,1) Power Steering Fluid q Inspecting Power Steering FluidLevel CAUTION To avoid damage to the powersteering pump, don't operate thevehicle for long periods when thepower steering fluid level is low. NOTE Use specified power steering fluid (page 10-4). Inspect the fluid level in the ...

Black plate (352,1) Inspect fluid level in the washer fluidreservoir; add fluid if necessary. Use plain water if washer fluid isunavailable.But use only washer fluid in cold weatherto prevent it from freezing. Body Lubrication All moving points of the body, such asdoor and hood hinges and locks, sho...

Black plate (353,1) Wiper Blades CAUTION Ø Hot waxes applied by automaticcar washers have been known toaffect the wiper's ability to cleanwindows. Ø To prevent damage to the wiperblades, don't use gasoline,kerosene, paint thinner, or othersolvents on or near them. Contamination of either the windshi...

Black plate (354,1) 3. Remove the metal stiffeners from each blade rubber and install them in thenew blade. CAUTION Ø Don't bend or discard thestiffeners. You need to use themagain. Ø If the metal stiffeners areswitched, the blade's wipingefficiency could be reduced.So don't use the driver's side me...

Black plate (355,1) Battery WARNING Wash hands after handling the battery and related accessories: Battery posts, terminals and related accessories contain lead and lead compounds,chemicals known to the State of California to cause cancer and reproductive harm. Read the following precautions careful...

Black plate (357,1) NOTE l Remove the rubber hose first, and thenbattery cover before performing batterymaintenance. Battery cover Rubber hose l Before installing the battery cover, makesure both of the cables connecting thenegative battery terminal (right side ofbattery) are connected with the cabl...

Black plate (358,1) Tires For reasons of proper performance, safety,and better fuel economy, always maintainrecommended tire inflation pressures andstay within the recommended load limitsand weight distribution. WARNING Using Different Tire Types: Driving your vehicle with differenttypes of tires is...

Black plate (359,1) q Tire Rotation To equalize tread wear, rotate the tires ifirregular wear develops. According to thescheduled maintenance charts.Refer toScheduled Maintenance on page 8-3.During rotation, inspect them for correctbalance. NOTE Because your vehicle is not equipped with aspare tire,...

Black plate (360,1) NOTE (With Tire Pressure Monitoring System) l When tires with steel wire reinforcement inthe sidewalls are used, the system may notfunction correctly even with a genuinewheel.Refer to System Error Activation on page5-32. l Be sure to install the tire pressure sensorswhenever tire...

Black plate (362,1) Light Bulbs High-mount brake lightLicense plate lightsTrunk light Reverse lightsRear turn signal lightsBrake lights/Taillights Rear side-marker lights Overhead light Headlights (Low beam) Headlights (High beam) Some models. Fog lights Front turn signal lights/Parking lights Front...

Black plate (363,1) WARNING Do not replace the xenon fusion bulbsyourself: Replacing the xenon fusion bulbsyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Consult an AuthorizedMazda Dealer when the repl...

Black plate (364,1) Low-beam bulbs (Xenon fusion bulbs) You cannot replace the low beam bulbs byyourself. The bulbs must be replaced at anAuthorized Mazda Dealer. (Halogen bulbs) 1. If you are changing the right bulb, start the engine, turn the steering wheel allthe way to the right, and turn offeng...

Black plate (365,1) 7. Remove the adapter. 8. Install the new bulb in the reverse order of the removal procedure. Front fog light bulbs í 1. Make sure the ignition is switched off, and the headlight switch is off. 2. Turn the screws and the center section of the plastic retainerscounterclockwise and...

Black plate (367,1) Front turn signal lights/Parking lights 1. If you are changing the right bulb, start the engine, turn the steering wheel allthe way to the right, and turn offengine. If you are changing the leftbulb, turn the steering wheel to the left. 2. Make sure the turn signal switch is off....

Black plate (368,1) 5. Remove the trunk lid release lock-out button connector. 6. On the side the bulb is to be replaced, pull the center section of the plasticretainers and remove them, thenremove the trunk side trim. Removal Installation 7. Disconnect the bulb from the socket. Rear turn signal lig...

Black plate (369,1) High-mount brake light Due to the complexity and difficulty ofthe procedure, the LED bulbs should bereplaced by an Authorized Mazda Dealer. License plate lights 1. Make sure the ignition is switched off, and the headlight switch is off. 2. Lift the trunk. 3. Slide the light to th...

Black plate (370,1) Trunk light 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the trim andgently insert it in the luggagecompartment light as shown in thefigure, and then remove the luggagecompartment light unit. 2. Disconnect the bulb by pulling it out. 3. Install the new bu...

Black plate (371,1) 3. Pull the fuse straight out with the fuse puller provided on the inside of theengine compartment fuse block cover. Fuse puller Fuse block cover 4. Inspect the fuse and replace it if it's blown. Normal Blown 5. Insert a new fuse of the same amperage rating, and make sure it fits...

Black plate (373,1) q Fuse Panel Description Fuse block (Engine compartment) DESCRIPTION FUSE RATING PROTECTED COMPONENT 1 FAN 30 A Cooling fan 2 FAN 7.5 A Cooling fan 3 DEFOG 20 A Rear window defroster 4 H/CLEAN ― ― 5 ROOM 15 A Overhead lights, Luggage compartment light, For protection ofvarious ci...

Black plate (376,1) How to MinimizeEnvironmental Paint Damage The paintwork on your Mazda representsthe latest technical developments incomposition and methods of application. Environmental hazards, however, canharm the paint's protective properties, ifproper care is not taken. Here are some example...

Black plate (377,1) q Water Marks Occurrence Rain, fog, dew, and even tap water cancontain harmful minerals such as salt andlime. If moisture containing theseminerals settles on the vehicle andevaporates, the minerals will concentrateand harden to form white rings. The ringscan damage your vehicle's...

Black plate (378,1) Exterior Care Follow all label and container directions when using a chemical cleaner or polish.Read all warnings and cautions. q Maintaining the Finish Washing To help protect the finish from rust anddeterioration, wash your Mazdathoroughly and frequently, at least once amonth, ...

Black plate (379,1) After washing the vehicle, dry it with aclean chamois to prevent water spots fromforming. WARNING Dry wet brakes by driving very slowlyand applying the brakes lightly untilbrake performance is normal: Driving with wet brakes isdangerous. Increased stoppingdistance or the vehicle ...

Black plate (380,1) q Underbody Maintenance Road chemicals and salt used for ice andsnow removal and solvents used for dustcontrol may collect on the underbody. Ifnot removed, they will speed up rustingand deterioration of such underbody partsas fuel lines, frame, floor pan, and exhaustsystem, even ...

Black plate (381,1) 2. Gently clean the convertible top with a synthetic neutral detergent, lots ofwater, and a soft brush. 3. Rinse it thoroughly with clean water to remove all the soap. 4. Wipe it as dry as you can before the water dries on it. 5. Then allow it to dry completely before lowering it...

Black plate (382,1) CAUTION Ø Don't use an automatic car wash. Ø Don't use strong soap, chemicaldetergents, or hot water, and don'twash the hardtop in directsunlight or when the surface iswarm. Thoroughly rinse with lukewarm or coldwater. Don't allow soap to dry on thefinish. Waxing Wax the hardtop ...

Black plate (383,1) Fabric Remove dust and loose dirt from fabricwith a whisk broom or vacuum cleaner.Clean it with a mild soap solution goodfor upholstery and carpets. Remove freshspots immediately with a fabric spotcleaner. To keep the fabric looking clean andfresh, take care of it. Otherwise its ...

Black plate (386,1) Customer Assistance (U.S.A.) Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement re...

Black plate (388,1) q California Customers 1. Mazda North American Operations participates in BBB AUTO LINE, a mediation/ arbitration program administered by the Council of Better Business Bureaus [4200Wilson Boulevard, Arlington, Virginia 22203] through local Better Business Bureaus.BBB AUTO LINE a...

Black plate (392,1) CAMVAP is fully implemented in all provinces and territories.Consumers wishing to obtain further information about the Program should contact theProvincial Administrator at 1 (800) 207-0685, or by contacting theCanadian Motor Vehicle Arbitration Plan Office at: Canadian Motor Veh...

Black plate (394,1) Customer Assistance (Mexico) Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement re...

Black plate (395,1) In order to serve you efficiently and effectively, please help us by providing the followinginformation: 1. Your name, address, and telephone number2. Year and model of vehicle3. Vehicle Identification Number (17 digits, noted on your registration or title or located on the upper...

Black plate (396,1) Importer/Distributor q U.S.A. Mazda North American Operations 7755 Irvine Center DriveIrvine, CA 92618-2922 U.S.A.P.O. Box 19734Irvine, CA 92623-9734 U.S.A.TEL: 1 (800) 222-5500 (in U.S.A.)(949) 727-1990 (outside U.S.A.) Distributor in Each Area q CANADA Mazda Canada Inc. 55 Voge...

Black plate (397,1) Triple J Saipan, Inc. (d.b.a. Triple J Motors) P.O. Box 500487 Saipan, MP 96950-0487TEL: (670) 234-7133/3051 q AMERICAN SAMOA Polynesia Motors, Inc. P.O. Box 1120, Pago Pago, AmericanSamoa 96799TEL: (684) 699-9347 Customer Information and Reporting Safety Defects Mazda Importer/D...

Black plate (398,1) Warranties for Your Mazda l New Vehicle Limited Warranty l Distributor Major Component Limited Warranty (Canada only) l Safety Restraint System Limited Warranty l Anti-perforation Limited Warranty l Federal Emission Control Warranty (U.S.A. only) l Emission Defect Warranty l Emis...

Black plate (399,1) Outside the United States and Canada Government regulations in the United States and Canada require that automobiles meetspecific emission regulations and safety standards. Therefore, vehicles built for use in theUnited States, its territories, and Canada may differ from those so...

Black plate (400,1) Outside the United States Government regulations in the United States require that automobiles meet specificemission regulations and safety standards. Therefore, vehicles built for use in the UnitedStates may differ from those sold in other countries. The differences may make it ...

Black plate (401,1) Outside Canada Government regulations in Canada require that automobiles meet specific emissionregulations and safety regulations. Therefore, vehicles built for use in Canada may differfrom those sold in other countries. The differences may make it difficult or even impossible fo...

Black plate (404,1) Cell Phones Warning WARNING Please comply with the legal regulations concerning the use of communicationequipment in vehicles in your State or Province: Use of any electrical devices such as cell phones, computers, portable radios, vehiclenavigation or other devices by the driver...

Black plate (405,1) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. NationalHighway Traffic Safety Administration for grading tires by tread wear, traction, andtemperature performance. q Tread Wear The tread wear grade is a compar...

Black plate (406,1) WARNING Keep your vehicle's tires properly inflated and not overloaded: Driving with improperly inflated or overloaded tires is dangerous. Excessive speed,underinflation, or excessive loading, either separately or in combination, can causeheat buildup and possible tire failure. T...

Black plate (407,1) Tire Labeling Federal law requires tire manufacturers to place standardized information on the sidewall ofall tires. This information identifies and describes the fundamental characteristics of the tireand also provides a tire identification number for safety standard certificati...

Black plate (411,1) q Information on Temporary Tires Please refer to the diagram below. 1. Temporary tires 2. Nominal width of tire in millimeters 3. Ratio of height to width (aspect ratio) 4. Diagonal 5. Rim diameter code 6. Load index&speed symbol T115/70D 16 90M is an example of a tire size a...

Black plate (413,1) Location of the Tire Label (Placard) You will find the tire label containing tire inflation pressure by tire size and other importantinformation on the driver's side B-pillar or on the edge of the driver's door frame. SAMPLE q Recommended Tire Inflation Pressure On the tire label...

Black plate (414,1) WARNING Always check the tire inflation pressures on a regular basis according to therecommended tire inflation pressure on the tire label and in conjunction with theinformation in this owner's manual: Driving your vehicle with under-inflated tires is dangerous.Under-inflation is...

Black plate (415,1) q Glossary of Terms Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry. Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturi...

Black plate (416,1) Tire Maintenance Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here aresome important maintenance points: q Tire Inflation Pressure Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintainrecommended pressures for ...

Black plate (417,1) CAUTION Rotate unidirectional tires and radial tires that have an asymmetrical tread patternor studs only from front to rear, not from side to side. Tire performance will beweakened if rotated from side to side. (With limited-slip differential) Don't use the following: Ø Tires no...

Black plate (418,1) q Safety Practices The way you drive has a great deal to do with your tire mileage and safety. So cultivategood driving habits for your own benefit. l Observe posted speed limits l Avoid fast starts, stops and turns l Avoid potholes and objects on the road l Do no run over curbs ...

Black plate (419,1) Vehicle Loading WARNING Do not tow a trailer with this vehicle: Towing a trailer with this vehicle is dangerous because it has not been designed totow a trailer and doing so will affect the drive system which could result in vehicledamage. This section will guide you in the prope...

Black plate (420,1) Base Curb Weight is the weight of the vehicle including a full tank of fuel and allstandard equipment. It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket e...

Black plate (421,1) SAMPLE CARGO Cargo Weight includes all weight added to the Base Curb Weight, including cargo and optional equipment. The cargo weight limit decreases depending on the number of vehicle occupants. The cargoweight limit can be calculated by subtracting the total weight of the vehic...

Black plate (422,1) Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg(849 lbs) for the “ combination weight of occupants and cargo should never exceed ” : The cargo weight limit with one occupant is 385 kg (849 lbs) _ 68 kg (150 lbs) = 317 kg(699 lbs)The cargo wei...

Black plate (423,1) SAMPLE WARNING Exceeding Axle Weight Rating Limits: Exceeding the Safety Certification Label axle weight rating limits is dangerous andcould result in death or serious injury as a result of substandard vehicle handling,performance, engine, transmission and/or structural damage, s...

Black plate (424,1) GCW GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW). GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the vehicle - including all cargo and passengers - that the vehicle can handle without riskingdamage. The GCW must never exceed ...

Black plate (425,1) Steps for Determining the Correct Load Limit: Steps for Determining Correct Load Limit:(1) Locate the statement “ The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs ” on your vehicle's placard. (2) Determine the combined weight of the driver and pass...

Black plate (426,1) Reporting Safety Defects (U.S.A.) If you believe that your vehicle has a defect which could cause a crash or couldcause injury or death, you should immediately inform the National HighwayTraffic Safety Administration (NHTSA) in addition to notifying Mazda MotorCorporation (Your M...

Black plate (428,1) Service Publications Factory-authorized Mazda service publications are available for owners who wish to dosome of their own maintenance and repair. When requesting any of our publications through an Authorized Mazda Dealer, refer to thechart below. If they don't have what you nee...

Black plate (429,1) 10 Specifications Technical information about your Mazda. Identification Numbers ............................................................... 10-2 Vehicle Information Labels ..................................................... 10-2 Specifications ................................

Black plate (430,1) Vehicle Information Labels q Vehicle Identification Number The vehicle identification number legallyidentifies your vehicle. The number is ona plate attached to the cowl panel locatedon the left corner of the dashboard. Thisplate can easily be seen through thewindshield. q Motor ...

Black plate (431,1) q Engine Number Forward Identification Numbers 10-3 MX-5_8Z78-EA-08K_Edition1 Page431Thursday, October 23 2008 1:54 PM Form No.8Z78-EA-08K

Black plate (432,1) Specifications q Engine Item Specification Type DOHC-16V in-line, 4-cylinder Bore×Stroke 87.5 × 83.1 mm (3.44 × 3.27 in) Displacement 1,999 ml (1,999 cc, 122.0 cu in) Compression ratio 10.8 q Electrical System Item Classification Battery 12V-36AH/5HR Spark-plug number L3G2 18 110...

Black plate (437,1) 11 Index 11-1 MX-5_8Z78-EA-08K_Edition1 Page437Thursday, October 23 2008 1:54 PM Form No.8Z78-EA-08K

Black plate (443,1) W Windows Power windows .......................... 3-37 Windshield Washer ........................... 5-59Windshield Wipers ............................ 5-58 Blades replacement .................... 8-25 Winter Driving .................................... 4-9 Index 11-7 MX-5_8Z78-...