Mazda 2008 SPEED3 - Manuals

Black plate (7,1) 1 Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Dashboard and Interior Overview .............................................. 1-2 Exterior Overview ......................................................................... 1-4 1-1 Mazda3_8...

Black plate (8,1) *Refer to Navigation System at the separate manual (if equipped). Power window lock switch ................................................................................ page 3-19Power window switches ..................................................................................

Black plate (10,1) 4 Door 1-4 Your Vehicle at a Glance The equipment and installation position varies by vehicle Exterior Overview Mazda3_8X41-EA-07F_Edition1 Page10Wednesday, April 25 2007 1:4 PM Form No.8X41-EA-07F

Black plate (15,1) 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags. Seats ............................................................................................... 2-2 Front Seats ....................................

Black plate (16,1) Front Seats WARNING Do not modify or replace the frontseats: Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodifications could d...

Black plate (17,1) Always sit in a passenger seat properlywith the seatback upright and feet onthe floor: If your vehicle is equipped with frontpassenger seat weight sensors,sitting in the front passenger seatimproperly out of position or with theseatback reclined too far while thevehicle is moving ...

Black plate (18,1) q Height Adjustment (Driver's Seat) í By moving the seat lever up or down, theseat bottom height can be adjusted. Down Up q Lumbar Support Adjustment(Driver's Seat) í To adjust the lumbar support, pull thelever forward. q Head Restraint WARNING Always drive with the head restraint...

Black plate (19,1) q Seat Warmer í The front seats are electrically heated. Theignition switch must be in the ONposition. Press the switch to turn the seat warmeron or off. When the switch is in the ONposition, the indicator light will come on. NOTE The seat temperature is regulatedautomatically by ...

Black plate (20,1) Never allow a passenger to sit or standon the folded seatback while thevehicle is moving: Driving with a passenger on thefolded seatback is dangerous.Allowing a child to sit up on thefolded seatback while the vehicle ismoving is particularly dangerous. Ina sudden stop or even a mi...

Black plate (24,1) Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and suddenstops. Mazda recommends that the driver and all passengers always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the w...

Black plate (25,1) WARNING Always wear your seat belt and make sure all occupants are properly restrained: Not wearing a seat belt is extremely dangerous. During a collision, occupants notwearing seat belts could hit someone or things inside the vehicle or even be thrownout of the vehicle. They coul...

Black plate (26,1) CAUTION Belt retraction may become difficult if the belts and rings are soiled, so try to keepthem clean. For more details about cleaning the seat belts, refer to “ Cleaning the Lap/Shoulder Belt Webbing ” (page 8-64). q Pregnant Women and Persons with Serious Medical Conditions P...

Black plate (27,1) q Automatic Locking Mode Always use the automatic locking mode to keep the child-restraint system from shifting toan unsafe position in the event of an accident. To enable seat belt automatic locking mode,pull it all the way out and connect it as instructed on the child-restraint ...

Black plate (28,1) Seat Belt (Except Center-Rear Position) NOTE When using the center-rear seat belt, refer to “ Center-Rear Position Seat Belt ” (page 2-19). q Fastening the Seat Belt 1. Grasp the tongue. 2. Slowly pull out the lap/shoulder belt. Tongue Belt 3. Insert the tongue into the buckle unt...

Black plate (29,1) q Unfastening the Seat Belt Depress the button on the buckle. If thebelt does not fully retract, pull it out andcheck for kinks or twists. Then make sureit remains untwisted as it retracts. Button NOTE If a belt does not fully retract, inspect it forkinks and twists. If it is stil...

Black plate (30,1) Front Seat Belt Pretensionerand Load Limiting Systems For optimum protection, the driver andfront passenger seat belts are equippedwith pretensioner and load limitingsystems. For both these systems to workproperly you must wear the seat beltproperly. Pretensioners: In moderate or ...

Black plate (35,1) Sedan (Behind head restraint on leftside) (A) (C) Hatchback (Left side of luggagecompartment) (A) (C) To pull out the seat belt, slide tongueswith your finger, and slowly pull out theseat belt from the recess. NOTE Pulling out the seat belt all the way out willswitch it to automat...

Black plate (36,1) WARNING Do not use a seat belt extender unlessit is necessary: Using a seat belt extender when notnecessary is dangerous. The seat beltwill be too long and not fit properly.In an accident, the seat belt will notprovide adequate protection and youcould be seriously injured. Only us...

Black plate (37,1) Seat Belt Warning Light/Beep The seat belt warning light illuminatesand a beep sound will be heard if thedriver's seat belt is not fastened when theignition switch is turned to the ONposition. Conditions of operation Condition Result The driver's seat belt is notfastened when the ...

Black plate (38,1) Driver seated/Front passenger seated The seat belt warning function remindsthe front passenger to fasten the seat beltaccording to the chart below. Condition Vehicle speed Between 0 ― 20 km/h (0 ― 12 mph) 20 km/h (12 mph) or more Seat belt(Driver) Seat belt(Passenger) Indicator Be...

Black plate (39,1) Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children small enough to usethem. You are required by law to use a child-restraint system for children in the U.S. and Canada.Check your local and state or provincial laws for specific requirem...

Black plate (40,1) WARNING Use the correct size child-restraint system: For effective protection in vehicle accidents and sudden stops, a child must beproperly restrained using a seat belt or child-restraint system depending on age andsize. If not, the child could be seriously injured or even killed...

Black plate (42,1) Never use one seat belt on more than one person at a time: Using one seat belt for more than one person at a time is dangerous. A seat beltused in this way cannot spread the impact forces properly and the two passengerscould be crushed together and seriously injured or even killed...

Black plate (48,1) With seat warmer Without seat warmer WARNING Do not seat a child in a child-restraintsystem on the front passenger seat ifthe front passenger air bagdeactivation indicator light does notilluminated: While it is always better to install anychild-restraint system on the rearseat, it...

Black plate (49,1) LATCH Child-Restraint Systems Your Mazda is equipped with LATCH lower anchors for attachment of specially designedLATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise theseat will bounce around and put the child in danger. Most LATCH child-restraint...

Black plate (52,1) WARNING Use the tether and tether anchor onlyfor a child-restraint system: Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether ortether anchor and result in injury. Always attach the tether strap to th...

Black plate (54,1) Supplemental Restraint Systems (SRS) Precautions The front and side supplemental restraint systems (SRS) include up to 6 air bags. Please verify which kinds of air bags are equipped on your vehicle by locating the “ SRS AIRBAG ” location indicators. These indicators are visible in...

Black plate (55,1) WARNING Seat belts must be worn in air bag equipped vehicles: Depending only on the air bags for protection during an accident is dangerous.Alone, air bags may not prevent serious injuries. The appropriate air bags can beexpected to inflate only in the first collision with frontal...

Black plate (58,1) Supplemental Restraint System Components The supplemental restraint systems (SRS) have two basic subsystems: l The air bag system with inflators and air bags. l The electrical system with crash sensors and diagnostic module. The air bags are mounted in the following locations: l T...

Black plate (59,1) q Front Air Bag System Components (1) (6) (10) (7) (6) (9) (5) (4) (3) (2) (8) (1) Driver seat slide position sensor (page 2-47)(2) Front seats(3) Front dual stage inflators and air bags(4) Front air bag sensor(5) Front passenger air bag deactivation indicator light (page 2-47)(6)...

Black plate (60,1) q Side and Curtain Air Bag System Components í 4 Door 5 Door (4) (1) (1) (3) (2) (3) (4) (1) (1) (2) (1) Side and curtain inflators and air bags(2) Front seats(3) Crash sensors and diagnostic module (SAS unit)(4) Side crash sensor 2-46 Essential Safety Equipment í Some models. SRS...

Black plate (61,1) How the Air Bags Work q How the Front Air Bags Work When air bag crash sensors detect a frontal impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the front air bags and after the inflation, the front air bagsquickly ...

Black plate (62,1) Front passenger seat weight sensors Vehicles equipped with front passenger seat weight sensors are also equipped with a frontpassenger air bag deactivation indicator light is also equipped (page 2-33). These sensorsare located under both of the front passenger seat rails. These se...

Black plate (64,1) WARNING Do not decrease the total seated weight on the passenger seat: When an adult or large child sits on the front passenger seat, decreasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 42 kg (93 lb) required for air bag deplo...

Black plate (65,1) Do not increase the total seated weight on the passenger seat: When an infant or small child sits on the front passenger seat, increasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 30 kg (66 lb) is dangerous. The front passenger...

Black plate (66,1) NOTE l The system requires about 10 seconds to alternate between turning the front passenger front andside air bags and seat belt pretensioner system on or off. l The front passenger air bag deactivation indicator light may illuminate repeatedly if luggage orother items are put on...

Black plate (67,1) q Air Bag Activation/Deactivation NOTE If the front passenger seat weight sensors detect a total seated weight on the front passenger seat isless than approximately 42 kg (93 lb), the front passenger front and side air bags and seat beltpretensioner may not deploy (page 2-47), but...

Black plate (69,1) l Side impacts involving trees or polescan cause severe cosmetic damage butmay not have enough impact force toactivate the side and curtain air bags. l Vehicle roll-over may not provideenough side force to deploy the sideand curtain air bags. l Side impacts with two-wheeledvehicle...

Black plate (70,1) The diagnostic module continuouslymonitors the system's readiness. Thisbegins when the ignition switch is turnedto the ON position and continues whilethe vehicle is being driven. q Air Bag/Front Seat BeltPretensioner System Warning Light If the air bag/front seat belt pretensioner...

Black plate (71,1) l The air bag system warning beepsound will be heard. l The air bags have deployed. l Front passenger air bag deactivationindicator light does not illuminatewhen the ignition switch is turned tothe ON position or does not illuminateas indicated in the chart. For moredetails about ...

Black plate (73,1) 3 Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustmentof various parts. Doors and Locks ........................................................................... 3-2 Keys ....................................................................

Black plate (74,1) Keys WARNING Do not leave the keys in your vehiclewith children and keep them in a placewhere your children will not find orplay with them: Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. They could play with p...

Black plate (75,1) To retract the key, rotate it into the holderwhile pressing the release button. Keyless Entry System í This system remotely locks and unlocksthe doors and the liftgate.It can also help you signal for attention.Press the buttons slowly and carefully. CAUTION To avoid damage to the ...

Black plate (76,1) q Transmitter Integrated key type Lock button Unlock button Panic button Operation indicator light Non-key type Panic button Lock button Unlock button NOTE l (U.S.A.) This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) this d...

Black plate (77,1) NOTE l All doors and the liftgate cannot be lockedwhen any door or the liftgate is open andthe key is in the ignition switch. l Confirm that all doors and the liftgate arelocked visually or audibly by use of thedouble click. Unlock button To unlock the driver's door, press theunlo...

Black plate (79,1) Non-key type 1. Insert a small screwdriver into the slot and gently pry open the transmitter. Back cover Slot 2. Press the portion of the battery indicated by A and remove the battery. A 3. Install a new battery (CR2025 or equivalent) into the front portion of theholder with the p...

Black plate (80,1) Door Locks WARNING Always take all children and pets withyou or leave a responsible person withthem: Leaving a child or a pet unattendedin a parked vehicle is dangerous. Inhot weather, temperatures inside avehicle can become high enough tocause brain damage or even death. Do not l...

Black plate (81,1) q Locking, Unlocking withTransmitter í The doors can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3). q Locking, Unlocking with Door-Lock Knob To lock any door from the inside, push thedoor-lock knob.To unlock, pull it ou...

Black plate (82,1) Locking, unlocking with key All doors and the liftgate lockautomatically when the driver's door islocked with the key. All doors and theliftgate unlock when the driver's door isunlocked and the key is held in the unlockposition for one second or longer. Unlock Lock NOTE Holding th...

Black plate (83,1) Liftgate (5 Door) WARNING Never allow a person to ride in theluggage compartment: Allowing a person to ride in theluggage compartment is dangerous.The person in the luggagecompartment could be seriouslyinjured or killed during suddenbraking or a collision. Do not drive with the li...

Black plate (84,1) NOTE If the vehicle battery is dead or there is amalfunction in the electrical system and theliftgate cannot be unlocked, perform thefollowing procedure as an emergency measureto unlock it: 1. Remove the cap on the interior surface of the liftgate with a flathead screwdriver. Cap ...

Black plate (85,1) Luggage compartment cover strap The luggage compartment can beaccessed by opening the liftgate when thestraps are attached to the sides of theliftgate. Strap Luggage compartment cover The luggage compartment can beaccessed by opening the luggagecompartment cover from the inside of...

Black plate (86,1) Trunk Lid (4 Door) WARNING Never allow a person to ride in thetrunk: Allowing a person to ride in the trunkis dangerous. In addition, the personin the trunk could be seriouslyinjured or killed during suddenbraking or a collision. Keep the trunk closed when driving: Exhaust gas ent...

Black plate (87,1) Opening the trunk lid with the key Insert the key into the slot and turn itclockwise. Open Opening the trunk lid with the remoterelease lever Pull up the release lever next to thedriver's seat. Release lever Closing the trunk lid Use both hands to push the trunk lid downuntil the ...

Black plate (90,1) Power Windows í The ignition switch must be in the ONposition for the power windows tooperate. WARNING Make sure the opening is clear beforeclosing a window: Closing power windows aredangerous. A person's hands, head,or even neck could be caught by thewindow and result in serious ...

Black plate (91,1) q Operating the Passenger PowerWindows The power windows may be operatedwhen the power window lock switch onthe driver's door is in the unlockedposition. The passenger windows may be opened orclosed by the power window mastercontrol switches on the driver's door. Left rear window ...

Black plate (92,1) Fuel-Filler Lid and Cap WARNING When removing the fuel cap, loosen thecap slightly and wait for any hissing tostop. Then remove it: Fuel spray is dangerous. Fuel canburn skin and eyes and cause illnessif ingested. Fuel spray is releasedwhen there is pressure in the fueltank and th...

Black plate (93,1) q Fuel-Filler Cap To remove the filler cap, turn itcounterclockwise. To close the filler cap, turn it clockwiseuntil two or more clicks are heard. Open Close CAUTION Make sure the fuel-filler cap istightened securely. The check enginelight may illuminate when the capisn't tightene...

Black plate (94,1) 2. (Type A) Insert your hand into the hood openingand slide the hood latch to the left andlift the hood. (Type B) Insert your hand into the hood openingand slide the hood latch to the right andlift the hood. Type A Type B 3. Grasp the support rod in the padded area indicated by th...

Black plate (95,1) Moonroof í The moonroof can be opened or closedelectrically only when the ignition switchis in the ON position. Tilt switch Slide switch WARNING Do not let passengers stand up orextend part of the body through theopen moonroof while the vehicle ismoving: Extending the head, arms, ...

Black plate (97,1) Immobilizer System The immobilizer system allows the engineto start only with a key the systemrecognizes. If someone attempts to start the enginewith an unrecognized key, the engine willnot start, thereby helping to prevent thetheft of your vehicle. CAUTION Ø Radio equipment like ...

Black plate (98,1) NOTE l (U.S.A.) This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) this devicemay not cause harmful interference, and (2)this device must accept any interferencereceived, including interference that maycause undesired operat...

Black plate (99,1) q Maintenance If you have a problem with theimmobilizer system or the key, consult anAuthorized Mazda Dealer. NOTE l The keys carry a unique electronic code.For this reason, and to assure your safety,obtaining replacement key requires somewaiting time. They are only availablethrou...

Black plate (100,1) q How to Arm the System 1. Remove the key from the ignition switch. 2. Make sure the hood is closed. Close and lock all doors and the liftgate/trunklid from the outside using the key. Ifyou have the keyless entry system,press the lock button on the transmitter.The hazard warning ...

Black plate (101,1) Steering Wheel WARNING Never adjust the steering wheel whilethe vehicle is moving: Adjusting the steering wheel whilethe vehicle is moving is dangerous.Moving it can very easily cause thedriver to abruptly turn to the left orright. This can lead to loss of controlor an accident. ...

Black plate (102,1) 2. Depress the mirror switch in the appropriate direction. Mirror switch Outside mirror Selector switch After adjusting the mirror, lock the controlby moving the selector switch to themiddle position. Manual control mirror To adjust, move the mirror's control lever,just inside th...

Black plate (105,1) 4 Before Driving Your Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ........................................ 4-2 Fuel Requirements .................................................................... 4-2Emission Control System ............

Black plate (106,1) Fuel Requirements Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,which will reduce exhaust emissions and keep spark plug fouling to a minimum. 2.3-liter turbocharger engine Your Mazda will perform best with fuel listed in the table. Fuel Octane R...

Black plate (108,1) Emission Control System Your vehicle is equipped with an emission control system (the catalytic converter is part ofthis system) that enables your vehicle to comply with existing exhaust emissionsrequirements. WARNING Never park over or near anything flammable: Parking over or ne...

Black plate (109,1) Engine Exhaust (Carbon Monoxide) WARNING Do not drive your vehicle if you smell exhaust gas inside the vehicle: Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which iscolorless, odorless, and poisonous. When inhaled, it can cause loss of consciousnessand...

Black plate (110,1) Before Getting In l Be sure the windows, outside mirrors,and outside lights are clean. l Inspect inflation pressures andcondition of tires. l Look under the vehicle for any sign offluid leaks. l If you plan to back up, make surenothing is in your way. NOTE Engine oil, engine cool...

Black plate (111,1) Break-In Period No special break-in is necessary, but a fewprecautions in the first 1,000 km (600miles) may add to the performance,economy, and life of your Mazda. l Don't race the engine. l Don't maintain one constant speed,either slow or fast, for a long period oftime. l Don't ...

Black plate (112,1) Hazardous Driving WARNING Be extremely careful if it is necessary todownshift on slippery surfaces: Downshifting into lower gear whiledriving on slippery surfaces isdangerous. The sudden change in tirespeed could cause the tires to skid.This could lead to loss of vehiclecontrol a...

Black plate (113,1) Rocking the Vehicle WARNING Do not spin the wheels at more than 56km/h (35 mph), and do not allowanyone to stand behind a wheel whenpushing the vehicle: When the vehicle is stuck, spinningthe wheels at high speed isdangerous. The spinning tire couldoverheat and explode. This coul...

Black plate (114,1) WARNING Use only the same size and type tires(snow, radial, or non-radial) on all fourwheels: Using tires different in size or type isdangerous. Your vehicle's handlingcould be greatly affected and resultin an accident. CAUTION Check local regulations before usingstudded tires. N...

Black plate (115,1) Driving In Flooded Area WARNING Dry wet brakes by driving very slowlyand applying the brakes lightly untilbrake performance returns to normal: Driving with wet brakes isdangerous. Increased stoppingdistance or the vehicle pulling to oneside when braking could result in aserious a...

Black plate (116,1) Turbocharger Information í The turbocharger greatly enhances engine power. Its advanced design provides improvedoperation and requires minimum additional maintenance. To get maximum performancefrom your turbocharged engine, take note of the following tips: l The turbocharged engi...

Black plate (117,1) Trailer Towing The Mazda3 is not designed for towing.Never tow a trailer with your Mazda3. Before Driving Your Mazda Towing 4-13 Mazda3_8X41-EA-07F_Edition1 Page117Wednesday, April 25 2007 1:4 PM Form No.8X41-EA-07F

Black plate (119,1) 5 Driving Your Mazda Explanation of instruments and controls. Starting and Driving ..................................................................... 5-2 Ignition Switch .......................................................................... 5-2Starting the Engine ............

Black plate (120,1) Ignition Switch q Ignition Switch Positions LOCK The steering wheel locks to protectagainst theft. Only in this position can thekey be removed. Manual transaxle To turn the key from the ACC to theLOCK position, push the button when thekey is at the ACC position, then turn thekey ...

Black plate (121,1) WARNING Remove the key only when the vehicleis parked: Removing the key from the ignitionswitch while the vehicle is moving isdangerous. Removing the key allowsthe steering wheel to lock. You willlose steering control and a seriousaccident could occur. Before leaving the driver's...

Black plate (122,1) Starting the Engine NOTE Engine-starting is controlled by the sparkignition system.This system meets all Canadian Interference-Causing Equipment Standard requirementsregulating the impulse electrical field strengthof radio noise. 1. Occupants should fasten their seat belts. 2. Ma...

Black plate (123,1) Brake System q Foot Brake Your Mazda has power-assisted brakesthat adjust automatically through normaluse. Should power-assist fail, you can stop byapplying greater force than normal to thebrake pedal. But the distance required tostop will be greater than usual. WARNING Do not co...

Black plate (124,1) q Parking Brake WARNING Before leaving the driver's seat, alwaysput the key to LOCK position, set theparking brake and make sure the shiftlever is in P with an automatictransaxle or in 1 or R with a manualtransaxle: Intentionally placing the key intoLOCK position is much moreimpo...

Black plate (125,1) q Brake System Warning Light This warning has the following functions: Parking brake warning The light comes on when the parkingbrake is applied with the ignition switchin the START or ON position. It goes offwhen the parking brake is fully released. Low brake fluid level warning...

Black plate (126,1) WARNING Do not rely on ABS as a substitute forsafe driving: The ABS cannot compensate forunsafe and reckless driving, excessivespeed, tailgating (following anothervehicle too closely), driving on ice andsnow, and hydroplaning (reduced tirefriction and road contact because ofwater...

Black plate (127,1) WARNING Do not drive with both the ABS warninglight and brake warning lightilluminated. Have the vehicle towed toan Authorized Mazda Dealer to havethe brakes inspected as soon aspossible: Driving when the brake systemwarning light and ABS warning lightare illuminated at the same ...

Black plate (128,1) (6-speed transaxle) Vehicles with 6-speed transaxle areequipped with a device to prevent shiftingto R (reverse) by mistake. Push the shiftlever downward and shift to R. WARNING Do not use sudden engine braking onslippery road surfaces or at highspeeds: Shifting down while driving...

Black plate (130,1) Automatic Transaxle Controls Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ON position). Indicates the shift lever can be shifted freely into any position. Various Lockouts: NOTE This Sport AT has an option that is not included in tr...

Black plate (131,1) q Transaxle Ranges The shift lever must be in P or N tooperate the starter. P (Park) P locks the transaxle and prevents thefront wheels from rotating. WARNING Always set the shift lever to P and setthe parking brake: Only setting the shift lever to the Pposition without using the...

Black plate (132,1) q Shift-Lock System The shift-lock system prevents shiftingout of P unless the brake pedal isdepressed. To shift from P: 1. Depress and hold the brake pedal. 2. Start the engine. 3. Move the shift lever. NOTE l When the ignition switch is in the ACC orLOCK position, the shift lev...

Black plate (134,1) Manually Shifting down (M5 * → M4 → M3 → M2 → M1) To shift down to a lower gear, tap the shiftlever forward ( ) once. * 2.3-liter engine model WARNING Do not use sudden engine braking onslippery road surfaces or at highspeeds: Shifting down while driving on wet,snowy, or frozen r...

Black plate (136,1) (2.3-liter engine model) Gear Vehicle speed M1 to M2 24 km/h (15 mph) M2 to M3 40 km/h (25 mph) M3 to M4 65 km/h (40 mph) M4 to M5 73 km/h (45 mph) Downshifting When you must slow down in heavytraffic or on a steep upgrade , downshift before the engine starts to overwork. Thisgiv...

Black plate (137,1) If the light stays illuminated after theengine is started or illuminates whiledriving, turn off the engine after parkingin a safe place, and then start the engineagain.If the light does not illuminate afterrestarting the engine, this indicates thatthe power steering is restored a...

Black plate (138,1) q Activation/Deactivation To activate the system, press the ON/OFFswitch.The cruise main indicator lightilluminates. To deactivate the system, press the switchagain.The cruise main indicator light turns off. WARNING Keep the ON/OFF switch off whencruise control is not in use: Lea...

Black plate (139,1) q To Increase Cruising Speed Follow either of these procedures. To increase speed using cruise controlswitch Press the RES/ACCEL button and hold it.Your vehicle will accelerate.Release the button at the speed you want. Your vehicle has a tap-up feature thatallows you to increase ...

Black plate (140,1) Your vehicle has a tap-down feature thatallows you to decrease your current speedin decrements of 1.6 km/h (1 mph) by amomentary tap of the SET/COASTbutton. Multiple taps will decrease yourvehicle speed 1.6 km/h (1 mph) for eachtap. q To Resume Cruising Speed atMore Than 30 km/h ...

Black plate (141,1) Traction Control System(TCS) í The Traction Control System (TCS)enhances traction and safety bycontrolling engine torque and braking.When the TCS detects driving wheelslippage, it lowers engine torque andoperates the brakes to prevent loss oftraction. This means that on a slick s...

Black plate (142,1) Dynamic Stability Control(DSC) í The Dynamic Stability Control (DSC)automatically controls braking and enginetorque in conjunction with systems suchas ABS and TCS to help control side slipwhen driving on slippery surfaces, orduring sudden or evasive maneuvering,enhancing vehicle ...

Black plate (146,1) q Tire Pressure Monitoring SystemWarning Light This warning light illuminates for a fewseconds when the ignition switch is turnedto the ON position. Thereafter, the warning light illuminatesand a beep is heard when tire pressure istoo low in one or more tires, and flasheswhen the...

Black plate (148,1) If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture. Replace thepunctured tire with the temporary sparetire (page 7-8). NOTE A tire pressure sensor is not installed to thetemporary spare tire. The warning light willflash c...

Black plate (150,1) Meters and Gauges (Black-out meter) When the ignition switch is in the ON position, the dashboard gauges illuminate. Speedometer ...................................................................................................... page 5-33Odometer, Trip Meter and Trip Meter Sel...

Black plate (151,1) q Speedometer The speedometer indicates the speed ofthe vehicle. q Odometer, Trip Meter and TripMeter Selector The display mode can be changedbetween trip meter A and trip meter B bypressing the selector while one of them isdisplayed. The selected mode will bedisplayed. Selector ...

Black plate (152,1) Odometer The odometer records the total distancethe vehicle has been driven. Trip meter The trip meter can record the totaldistance of two trips. One is recorded intrip meter A, and the other is recorded intrip meter B. For instance, trip meter A can record thedistance from the p...

Black plate (153,1) CAUTION Driving with an overheated enginecan cause serious engine damage(page 7-14). q Fuel Gauge The fuel gauge shows approximately howmuch fuel is in the tank. We recommendkeeping the tank over 1/4 full. When thelow fuel warning light illuminates orwhen the needle is near E, re...

Black plate (155,1) Warning/Indicator Lights Warning/Indicator lights will appear in any of the highlighted areas Signal Warning/Indicator Lights Page Brake System Warning Light 5-39 Charging System Warning Light 5-40 Engine Oil Pressure Warning Light 5-40 Check Engine Light 5-41 ABS Warning Light 5...

Black plate (158,1) NOTE When the engine is jump-started to charge thebattery, uneven rpm occurs and the ABSwarning light comes on. This is due to a weakbattery, not a malfunction.Recharge the battery. q Electronic Brake ForceDistribution System Warning í If the electronic brake force distributionco...

Black plate (159,1) If the light illuminates while driving: 1. Drive to the side of the road and park off the right-of-way on level ground. 2. Turn off the engine and wait 5 minutes for the oil to drain back into the oilpan. 3. Inspect the engine oil level (page 8-20). If it's low, add oil. 4. Start...

Black plate (160,1) WARNING Never tamper with the air bag/pretensioner systems and always havean Authorized Mazda Dealer performall servicing and repairs: Self-servicing or tampering with thesystems is dangerous. An air bag/pretensioner could accidentallyactivate or become disabled causingserious in...

Black plate (161,1) Once the beep sound is heard, it continuessounding even if the vehicle speed lowersto 20 km/h (12 mph) or less until theseatbelt is fastened or the beep soundperiod has passed. Driver seated/Front passenger seated The seat belt warning function remindsthe front passenger to faste...

Black plate (162,1) q Automatic Transaxle Warning Light This warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.The light illuminates when the transaxlehas a problem. CAUTION If the automatic transaxle warninglight illuminates, the transaxle hasan electrical...

Black plate (164,1) If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture. Replace thepunctured tire with the temporary sparetire (page 7-8). NOTE A tire pressure sensor is not installed to thetemporary spare tire. The warning light willflash c...

Black plate (165,1) Gear position indicator When the shift lever is in the D or Mposition, the numeral for the selected geardisplays. q TCS/DSC Indicator Light í This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS or DSC isoperating, the in...

Black plate (167,1) Beep Sounds q Air Bag/Front Seat BeltPretensioner System Warning Beep If a malfunction is detected in both the airbag/front seat belt pretensioner systemand the warning light, a warning beepsound will be heard for about 1 minute.After that, the one-minute beep will berepeated eve...

Black plate (168,1) Lighting Control q Headlights Type A (Without AUTO position) Turn the headlight switch to turn theheadlights, other exterior lights anddashboard illumination on or off. Switch Position Headlights Off Off On TaillightsParking lightsLicense lightsSide-marker lightsDashboard illumin...

Black plate (170,1) NOTE If the headlights flicker, or the brightnessweakens, the bulb-life may be depleted and areplacement is necessary. Consult anAuthorized Mazda Dealer. q Lights-On Reminder If lights are on and the key is removedfrom the ignition switch, a continuousbeep sound will be heard whe...

Black plate (171,1) Without turbocharger Front seat Rear seat Load Switch Position Driver Passenger × ― ― ― 0 × × ― ― 0 × × × ― 1 × × × × 2 × ― ― × 3 ×: Yes ― : No With turbocharger Front seat Rear seat Load Switch Position Driver Passenger × ― ― ― 0 × × ― ― 0 × × × ― 1 × × × × 1 × ― ― × 2 ×: Yes ― ...

Black plate (172,1) Fog Lights í The fog lights help you to see as well asto be seen. The headlights must be turned on to turnon the front fog lights. To turn the front fog lights on, rotate thefog light switch to the position. Fog light switch To turn the front fog lights off, rotate thefog light s...

Black plate (173,1) q Windshield Wipers Type A (With INT position) Turn the wipers on by pulling the leverdown. INT ― Intermittent 1 ― Low speed 2 ― High speed For a single wiping cycle, push the leverup to . ― Mist Variable-speed intermittent wipers í Set the lever to INT and choose theinterval tim...

Black plate (175,1) NOTE l The auto-wiper control may not operatewhen the rain sensor temperature is about _ 10 °C(14 °F) or lower, or about 85 °C (185 °F) or higher. l If the windshield is coated with waterrepellent, the rain sensor may not be able tosense the amount of rainfall correctly andauto-w...

Black plate (176,1) Rear Window Wiper andWasher (5 Door) The ignition switch must be in the ONposition. q Rear Window Wiper Turn the wiper on by turning the rearwiper/washer switch. ON ― Normal INT ― Intermittent q Rear Window Washer To spray washer fluid, turn the rear wiper/washer switch to the po...

Black plate (177,1) Fully Automatic Type Air-Conditioning Indicator light CAUTION Don't use sharp instruments orwindow cleaners with abrasives toclean the inside of the rear windowsurface. They may damage thedefroster grid inside the window. NOTE This defroster is not designed for melting snow.If th...

Black plate (178,1) Hazard Warning Flasher The hazard warning lights should alwaysbe used when you stop on or near aroadway in an emergency. The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it. Hazard warning flasher De...

Black plate (179,1) 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audiosystem. Climate Control System ............................................................... 6-2 Operating Tips .......................................................................

Black plate (180,1) Operating Tips q Operating the Climate ControlSystem Operate the climate control system withthe engine running. NOTE To prevent the battery from being discharged,do not leave the fan control dial on for a longperiod of time with the ignition switch in theACC position when the eng...

Black plate (181,1) Vent Operation Center vents Side vents q Adjusting the Vents Directing airflow Side Vents To adjust the direction of airflow, open thevents and rotate them left and right. Push Center Vents To adjust the direction of airflow, movethe adjustment knob. Knob NOTE When using the air ...

Black plate (182,1) q Selecting the Airflow Mode Floor Vents Dashboard and Floor Vents Dashboard Vents Defroster and Floor Vents Defroster Vents 6-4 Interior Comfort Climate Control System Mazda3_8X41-EA-07F_Edition1 Page182Wednesday, April 25 2007 1:5 PM Form No.8X41-EA-07F

Black plate (183,1) Types of the Climate Control System Manual type and fully automatic type climate control systems are explained separately.Check your vehicle's climate control type and read the appropriate pages.Manual Type ............................................................................

Black plate (184,1) Manual Type í Air intake selector A/C switch Mode selector dial Temperature control dial Fan control dial Some models. q Control Switches Temperature control dial Cold Hot This dial controls temperature. Turn itclockwise for hot and counterclockwisefor cold. Fan control dial This...

Black plate (185,1) Mode selector dial Turn the mode selector dial to selectairflow mode (page 6-4). NOTE l If you want to slightly adjust the airflowamount, set the mode selector dial at . l For example, when the mode selector dial isat the position between the and positions, airflow from the floor...

Black plate (186,1) This mode can be used when driving on adusty road or in similar conditions. It alsohelps to provide quicker cooling of theinterior. WARNING Do not use the recirculated air mode incold or rainy weather: Using the recirculated air mode incold or rainy weather is dangerous asit will...

Black plate (187,1) q Ventilation 1. Set the mode selector dial to the position. 2. Set the air intake selector to the outside air mode. 3. Set the temperature control dial to the desired position. 4. Set the fan control dial to the desired speed. q Windshield Defrosting and Defogging 1. Set the mod...

Black plate (188,1) Fully Automatic Type í Climate control information is displayed on the information display. AMB (Ambient Temperature) switch Windshield defroster switch Fan control dial Temperature control dial Mode selector switch OFF switch Auto switch A/C switch Air intake selector q Control ...

Black plate (189,1) OFF switch Pressing the OFF switch shuts off theclimate control system. Temperature control dial Cold Hot This dial controls temperature.Turn itclockwise for hot and counterclockwisefor cold. Fan control dial Slow Fast The fan has seven speeds. The selectedspeed will be displayed...

Black plate (190,1) Air intake selector Outside or recirculated air positions canbe selected. Press the switch to selectoutside/recirculated air positions. Recirculated air position (indicatorlight illuminated) Use this position when going throughtunnels, driving in congested traffic (highengine exh...

Black plate (191,1) 2. Use the temperature control dial to select a desired temperature. Cold Hot To turn off the system, press the OFFswitch. NOTE l Setting the temperature to maximum highor low will not provide the desiredtemperature at a faster rate. l When selecting heat, the system will restric...

Black plate (193,1) Antenna q Detachable Type To remove the antenna, turn itcounterclockwise.To install the antenna, turn it clockwise.Make sure the antenna is securelyinstalled. Remove Install Type A Type B Install Remove CAUTION Ø To prevent damage to theantenna, remove it before enteringa car was...

Black plate (194,1) Operating Tips for AudioSystem WARNING Do not adjust the audio controlswitches while driving the vehicle: Adjusting the audio while driving thevehicle is dangerous as it coulddistract your attention from thevehicle operation which could lead toa serious accident. Always adjust th...

Black plate (197,1) l If the cassette tape is loose, it mayproduce poor sound or performanceduring playback. Use a pencil orsomething similar to remove any slack. l Only cassette tapes that play no longerthan 90 minutes should be used.Cassette tape exceeding 90 minutes arethin and may easily break. ...

Black plate (200,1) Handling the In-dash CD changer l This unit may not be able to playcertain CD-R/CD-RWs made using acomputer or music CD recorder due todisc characteristics, scratches,smudges, dirt, etc., or due to dust orcondensation on the lens inside theunit. l Storing CDs in the vehicle expos...

Black plate (201,1) l If a disc has both music data (CD-DA)and MP3 files, playback of the two filetypes differs depending on how thedisc was recorded. l Packet written discs cannot be playedon this unit. l This unit does not play CDs recordedusing MP3i (MP3 interactive), MP3PRO and RIFF MP3 formats....

Black plate (202,1) l MP3 files not conforming to the MP3format containing both header framesand data frames will be skipped andnot played. l This unit will play MP3 files that haveup to eight levels. However, the morelevels a disc has, the longer it will taketo initially start playing. It isrecomme...

Black plate (204,1) MEMO 6-26 Mazda3_8X41-EA-07F_Edition1 Page204Wednesday, April 25 2007 1:5 PM Form No.8X41-EA-07F

Black plate (205,1) Audio Set l Audio information is displayed on the information display. l There are two types of In-dash CD changers. Check which In-dash CD changer yourvehicle is equipped with. CD Player Cassette Tape Player Illustration is of a representative audio unit. In-Dash CD Changer (non...

Black plate (207,1) 2. Turn the audio control dial to adjust the selected functions as follows: Indication Turn Left Turn Right Select mode Decrease bass Increase bass Decrease treble Increase treble Shift the sound to the front Shift the sound to the rear Shift the sound to the left Shift the sound...

Black plate (208,1) q Operating the Radio Seek tuning buttons Channel preset buttons Manual tuning button/Auto memory button/Electric serial number button Scan button Band selector buttons Satellite button Radio ON Press a band selector button ( ) to turn the radio on. Band selection Successively pr...

Black plate (212,1) q Operating the Cassette Tape Player í Fast-forward button Rewind button APC button: (next program) (one being played) Repeat button Cassette tape play button Program button Dolby NR button Cassette tape slot Cassette tape eject button Cassette tape insert Insert the cassette tap...

Black plate (214,1) q Operating the Compact Disc (CD) Player í Track up button Track down button Load button Scan button Repeat button CD slot CD play button CD eject button Random button Reverse button Fast-forward button Type Playable data Music CD player(non-MP3 compatible) · Music data (CD-DA) I...

Black plate (216,1) q Operating the In-Dash CD Changer í Track up button Disc up/Folder up button Disc down/Folder down button Track down button Load button Scan button Repeat button CD slot CD eject button CD play button Display button Random button Reverse button Fast-forward button Channel preset...

Black plate (220,1) Display scroll (MP3 compatible type) Only 12 characters can be displayed atone time. To display the rest of thecharacters of a long title, turn the displayfeed dial ( ) to the right. Hidden titles can be scrolled into the display onecharacter at a time. NOTE The displayable numbe...

Black plate (221,1) q Error Indications If you see an error indication on the display, find the cause in the chart. If you cannot clearthe error indication, take the vehicle to an Authorized Mazda Dealer. Indication Cause Solution CHECK CD CD is inserted upside down Insert the CD properly. If the er...

Black plate (222,1) Audio Control SwitchOperation (Steering Wheel) í When the audio unit is turned on,operation of the audio unit from thesteering wheel is possible. NOTE Because the audio unit will be turned off underthe following conditions, the switches will beinoperable. l When the ignition swit...

Black plate (223,1) NOTE Cassette tape, CD, CD changer and SIRIUSdigital satellite radio modes cannot be selectedin the following cases: l A cassette deck, CD, CD changer, orSIRIUS digital satellite radio unit is notequipped on the audio system. l A cassette tape, or CD has not beeninserted. Connect...

Black plate (224,1) Auxiliary Input You can connect portable audio units orsimilar products on the market to theauxiliary jack to listen to music or audioover the vehicle's speakers. Auxiliary jack WARNING Do not adjust the portable audio unitor a similar product while driving thevehicle: Adjusting ...

Black plate (225,1) 3. Using a coin, turn the cap counterclockwise (about 45° from theclosed position) and remove it. NOTE Do NOT discard the cap. 4. Open the tray by pulling the lower release catch. 5. Pass the connection plug cord through the hole of the tray and insert the plugin the auxiliary ja...

Black plate (227,1) Safety Certification This CD player is made and tested to meet exacting safety standards. It meets FCCrequirements and complies with safety performance standards of the U.S. Department ofHealth and Human Services. CAUTION Ø This CD player should not be adjusted or repaired by any...

Black plate (228,1) Sunvisors When you need a sunvisor, lower it foruse in front or swing it to the side. Sunvisor q Vanity Mirrors í To use the vanity mirror, lower thesunvisor. Interior Lights q Illuminated Entry System í When the illuminated entry systemoperates, the overhead light (switch is int...

Black plate (229,1) q Overhead Lights í Front Switch Position Front Overhead Lights Light off l Light is on when any door isopen l ( With illuminated entry system ) Light is on or off when theilluminated entry system is on Rear Switch Position Rear Overhead Lights Light off Light is on when any door...

Black plate (231,1) Information Display With trip computer Without trip computer Trip computer/Clock Audio display Climate control display/Ambient temperature display q Information Display Functions The information display has the following functions: l Clock l Ambient Temperature Display (Outside T...

Black plate (232,1) q Clock NOTE When the trip computer is displayed, press theCLOCK button to change the display to thetime. When the ignition switch is in the ACC orON position, the time is displayed. Time setting 1. Press the CLOCK button until the beep sounds and the displayed time flashes. 2. P...

Black plate (233,1) Without fully automatic type airconditioner When the ignition switch is in the ONposition, the ambient temperature isdisplayed. NOTE l Under the following conditions, the ambienttemperature display may differ from theactual ambient temperature depending onthe surroundings and veh...

Black plate (236,1) Lighter The ignition switch must be in the ACCor ON position.Press the lighter in and release it. Whenready for use, it automatically pops out. CAUTION Ø Don't touch the metal part of thelighter, you may burn yourself. Ø Don't hold the lighter in because itwill overheat. Ø Don't ...

Black plate (237,1) Cup Holder WARNING Never use a cup holder to hold hotliquids while the vehicle is moving: Using a cup holder to hold hot liquidswhile the vehicle is moving isdangerous. If the contents spill, youcould be scalded. Do not put anything other than cups ordrink cans in cup holders: Pu...

Black plate (238,1) Bottle Holder Bottle holders are on the inside of thefront doors. Bottle holder CAUTION Do not use the bottle holders forcontainers without caps. Thecontents may spill when the door isopened or closed. Storage Compartments WARNING Keep storage boxes closed whendriving: Driving wi...

Black plate (239,1) q Center Console To open, pull the lower release latch. Small items can be placed in the tray ofthe center console lid.To open it, pull the upper release latch. q Cargo Securing Loops (5 Door) WARNING Make sure luggage and cargo issecured before driving: Not securing cargo while ...

Black plate (240,1) Without flexible floor board To use the cargo sub-compartment,remove or lift the trunk board. Cargo sub-compartment Trunk board q Flexible Floor Board (5 Door) í The luggage compartment can beseparated vertically and/or horizontally,using the trunk board and the trunk boardloops....

Black plate (241,1) 2. Insert the trunk board loops into the trunk board slits. Front Trunk board NOTE To facilitate insertion of the trunk board loopsinto the trunk board slits, first insert thebottom of the rear trunk board into the grooveof the luggage sub-compartment. Groove Cargo sub-compartmen...

Black plate (242,1) 3. Insert the other trunk board loop into slit B until a click sound is heard. Slit B 4. Rock the trunk board to make sure the board is installed securely. CAUTION Do not place or remove luggage viathe rear passenger seat area whilethe vehicle is moving. The trunkboard or luggage...

Black plate (243,1) When placing an electrical device (e.g.cellular phone) in the tray which isconnected to the accessory socket, passthe connection plug cord through the slotin the cap. Cap slot, closed Cap slot, opened 1. Open the lid by pulling the upper release catch. 2. Remove the tray mat. 3. ...

Black plate (244,1) 7. Pass the connection plug cord through the slit in the tray mat and then set thetray mat in place. 6-66 Interior Comfort Interior Equipment Mazda3_8X41-EA-07F_Edition1 Page244Wednesday, April 25 2007 1:6 PM Form No.8X41-EA-07F

Black plate (245,1) 7 In Case of an Emergency Helpful information on what to do in an emergency. Parking in an Emergency ............................................................. 7-2 Parking in an Emergency .......................................................... 7-2 Flat Tire ...................

Black plate (246,1) Parking in an Emergency The hazard warning lights should alwaysbe used when you stop on or near aroadway in an emergency. The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it. Depress the hazard warni...

Black plate (247,1) Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram. Lug wrench Jack handle Tiedown eyelet Jack Spare tire 4 Door In Case of an Emergency Flat Tire 7-3 Mazda3_8X41-EA-07F_Edition1 Page247Wednesday, April 25 2007 1:6 PM Form No.8...

Black plate (249,1) q Jack To remove the jack 1. Turn the knob and remove the cover. 2. Turn the wing bolt and jack screw counterclockwise. Wing bolt Jack screw To secure the jack 1. Insert the wing bolt into the jack with the jack screw pointing up and turn thewing bolt clockwise to temporarilytigh...

Black plate (252,1) Changing a Flat Tire NOTE If the following occurs while driving, it couldindicate a flat tire. l Steering becomes difficult. l The vehicle begins to vibrate excessively. l The vehicle pulls in one direction. If you have a flat tire, drive slowly to alevel spot that is well off th...

Black plate (253,1) q Removing a Flat Tire 1. If your vehicle is equipped with a wheel cover, pry off the wheel coverwith the beveled end of the lug wrench. NOTE Force the end of the lug wrench firmly betweenwheel and cover, or removal will be difficult. CAUTION There is a valve-stem mark inside the...

Black plate (254,1) WARNING Use only the front and rear jackingpositions recommended in this manual: Attempting to jack the vehicle inpositions other than thoserecommended in this manual isdangerous. The vehicle could slip offthe jack and seriously injure or evenkill someone. Use only the front andr...

Black plate (255,1) q Locking Lug Nuts í If your vehicle has optional antitheftwheel lug nuts, one on each wheel willlock the tires and you must use a specialkey to unlock them. This key is attachedto the lug wrench and is stored with thespare tire. Register them with the lockmanufacturer by filling...

Black plate (256,1) 3. Install the lug nuts with the beveled edge inward; tighten them by hand. WARNING Do not apply oil or grease to lug nutsand bolts and do not tighten the lugnuts beyond the recommendedtightening torque: Applying oil or grease to lug nuts andbolts is dangerous. The lug nutscould ...

Black plate (257,1) 7. Have the flat tire repaired or replaced as soon as possible. WARNING Do not drive with any tires that haveincorrect air pressure: Driving on tires with incorrect airpressure is dangerous. Tires withincorrect pressure could affecthandling and result in an accident.When you chec...

Black plate (258,1) Overheating If the temperature gauge indicatesoverheating, the vehicle loses power, oryou hear a loud knocking or pingingnoise, the engine is probably too hot. WARNING Turn off the ignition switch and make sure the fan is not running beforeattempting to work near the coolingfan: ...

Black plate (260,1) Starting a Flooded Engine If the engine fails to start, it may beflooded (excessive fuel in the engine). Follow this procedure: 1. If the engine does not start within 5 seconds on the first try, turn the key tothe LOCK position, wait 10 secondsand try again. 2. Depress the accele...

Black plate (261,1) Jump-Starting Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If youfeel unsure about jump-starting, we strongly recommend that you have a competent servicetechnician do the work. WARNING Follow These Precautions Carefully: To ensure safe and co...

Black plate (264,1) Push-Starting Do not push-start your Mazda. WARNING Never tow a vehicle to start it: Towing a vehicle to start it isdangerous. The vehicle being towedcould surge forward when its enginestarts, causing the two vehicles tocollide. The occupants could beinjured. CAUTION Do not push-...

Black plate (265,1) Towing Description We recommend that towing be done onlyby an Authorized Mazda Dealer or acommercial tow-truck service. Proper lifting and towing are necessary toprevent damage to the vehicle.Government and local laws must befollowed. A towed vehicle usually should have itsdrive ...

Black plate (266,1) CAUTION Do not use the hooks under the rearbumper for towing and tying down,as they cannot hold the load and itwill damage the bumper. Hooks Tiedown Hook CAUTION Don't use the tiedown hook underthe rear for towing.It is designed ONLY for tying downthe vehicle when it's beingtrans...

Black plate (267,1) 3. Securely install the tiedown eyelet using the lug wrench. Lug wrench 4. Hook the tying rope to the tiedown eyelet. CAUTION If the tiedown eyelet is not securelytightened, it may loosen or disengagefrom the bumper when tying downthe vehicle. Make sure that thetiedown eyelet is ...

Black plate (269,1) 8 Maintenance and Care How to keep your Mazda in top condition. Introduction .................................................................................. 8-2 Introduction ............................................................................... 8-2 Scheduled Maintenan...

Black plate (270,1) Introduction Be extremely careful and prevent injury to yourself and others or damage to your vehiclewhen using this manual for inspection and maintenance. If you're unsure about any procedure it describes, we strongly urge you to have a reliableand qualified service shop perform...

Black plate (271,1) Scheduled Maintenance (USA, Canada, and Puerto Rico) Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply. l Repeated short-distance driving l Driving in dusty conditions l Driving with extended use of brakes l Driving in areas where sal...

Black plate (272,1) q Schedule 1 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60 ENGINE Engine valve clearance Audible inspect every 120,000 km (75,000 miles),...

Black plate (274,1) q Schedule 2 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 96 ×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60 ENGINE Engine valve clearance Audible inspect every ...

Black plate (283,1) Owner Maintenance Schedule The owner or a qualified service technician should make these vehicle inspections at theindicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified servicetechnician as soon ...

Black plate (284,1) Owner Maintenance Precautions Improper or incomplete service may result in problems. This section gives instructions onlyfor items that are easy to perform. As explained in the Introduction (page 8-2), several procedures can be done only by aqualified service technician with spec...

Black plate (285,1) Engine Compartment Overview Main fuse Automatic transaxle fluid-level dipstick (Only for automatic transaxle) Brake/Clutch fluid reservoir Engine coolant reservoir Engine oil dipstick Power steering fluid reservoir Windshield washer fluid reservoir Engine oil-filler cap Battery F...

Black plate (286,1) Engine Oil NOTE Changing the engine oil should be done by anAuthorized Mazda Dealer. q Recommended Oil Use SAE 5W-20 engine oil (Withoutturbocharger). Oil container labels provide importantinformation.A chief contribution this type of oil makesto fuel economy is reducing the amou...

Black plate (288,1) The quality designation SM, or ILSACmust be on the label. –30 –20 –10 0 10 20 30 40 50 –20 0 20 40 60 80 100 120 5W-30 q Inspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 2. Warm up the engine to normal operating temperature. 3. Turn it off and wait at lea...

Black plate (289,1) Engine Coolant q Inspecting Coolant Level WARNING Do not use a match or live flame in theengine compartment. DO NOT ADDCOOLANT WHEN THE ENGINE IS HOT: A hot engine is dangerous. If theengine has been running, parts of theengine compartment can becomevery hot. You could be burned....

Black plate (291,1) Brake/Clutch Fluid q Inspecting Brake/Clutch Fluid Level The brakes and clutch draw fluid from thesame reservoir.Inspect the fluid level in the reservoirregularly. It should be kept at MAX.The level normally drops withaccumulated distance, a conditionassociated with wear of brake...

Black plate (292,1) Power Steering Fluid q Inspecting Power Steering FluidLevel CAUTION To avoid damage to the powersteering pump, don't operate thevehicle for long periods when thepower steering fluid level is low. NOTE Use specified power steering fluid (page 10-4). Inspect the fluid level in the ...

Black plate (294,1) 4AT The volume of fluid changes withtemperature. Fluid must be checked whileidling the engine without driving atnormal operating temperature. CAUTION Ø Low fluid level causes transaxleslippage. Overfilling can causefoaming, loss of fluid, andtransaxle malfunction. Ø Use specified...

Black plate (295,1) Fully insert the dipstick. When addingfluid, inspect with the dipstick to makesure it doesn't pass full. NOTE Inspect the fluid on both sides of the dipstick ina well lit area for an accurate reading. Washer Fluid q Inspecting Washer Fluid Level WARNING Use only windshield washer...

Black plate (296,1) Inspect fluid level in the washer fluidreservoir; add fluid if necessary. To inspect the washer fluid level in thefront reservoir, pull off the cap. Then,holding your thumb over the hole in thecenter of the cap, lift it straight up. Thefluid level can be seen from the fluidcolumn...

Black plate (297,1) Wiper Blades CAUTION Ø Hot waxes applied by automaticcar washers have been known toaffect the wiper's ability to cleanwindows. Ø To prevent damage to the wiperblades, don't use gasoline,kerosene, paint thinner, or othersolvents on or near them. Ø When the wiper lever is in theAUT...

Black plate (298,1) 2. Pull down the blade rubber and slide it out of blade holder. 3. Remove the metal stiffener from each blade rubber and install them in thenew blade. CAUTION Ø Don't bend or discard the stiffener.You need to use them again. Ø If the metal stiffeners areswitched, the blade's wipi...

Black plate (299,1) CAUTION To prevent damage to the rearwindow let the wiper arm downeasily, don't let it slap down on therear window. 2. Pull down the blade rubber and slide it out of the blade holder. 3. Remove the metal stiffener from each blade rubber and install them in thenew blade. CAUTION D...

Black plate (300,1) Battery WARNING Wash hands after handling the battery and related accessories: Battery posts, terminals and related accessories contain lead and lead compounds,chemicals known to the State of California to cause cancer and reproductive harm. Read the following precautions careful...

Black plate (302,1) NOTE Remove the battery cover before performingbattery maintenance. Battery cover q Battery Maintenance To get the best service from a battery: l Keep it securely mounted. l Keep the top clean and dry. l Keep terminals and connections clean,tight, and coated with petroleum jellyo...

Black plate (303,1) Tires For reasons of proper performance, safety,and better fuel economy, always maintainrecommended tire inflation pressures andstay within the recommended load limitsand weight distribution. WARNING Using Different Tire Types: Driving your vehicle with differenttypes of tires is...

Black plate (304,1) NOTE l Always check tire pressure when tires arecold. l Warm tires normally exceed recommendedpressures. Don't release air from warm tiresto adjust the pressure. l Underinflation can cause reduced fueleconomy, uneven and accelerated tire wear,and poor sealing of the tire bead, wh...

Black plate (305,1) NOTE (With Tire Pressure Monitoring System) l When tires with steel wire reinforcement inthe sidewalls are used, the system may notfunction correctly even with a genuinewheel.Refer to System Error Activation on page5-30. l Be sure to install the tire pressure sensorswhenever tire...

Black plate (306,1) NOTE Tires degrade over time, even when they arenot being used on the road. It is recommendedthat tires generally be replaced when they are6 years or older. Heat caused by hot climatesor frequent high loading conditions canaccelerate the aging process. You shouldreplace the spare...

Black plate (307,1) Light Bulbs Side turn signal lights Rear turn signal lights License plate light Overhead light/Map lights (Front) Headlights (Low beam) Fog lights Brake lights/Taillights Reverse lights High-mount brake light Trunk light 4 Door 5 Door Overhead light (Rear) Overhead light/Map ligh...

Black plate (308,1) WARNING Do not replace the xenon fusion bulbsyourself: Replacing the xenon fusion bulbsyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Consult an AuthorizedMazda Dealer when the repl...

Black plate (309,1) 3. Perform the following procedure when replacing the left headlight bulb.Remove the clip, grasp the attachedarea of the slide mount and lift itupward, and then slide the slide mountto a position where it does not interferewith the frame. Clip Slide mount Frame Attached area 4. R...

Black plate (312,1) Brake lights/Taillights (4 Door) With LED bulb Due to the complexity and difficulty ofthe procedure, the LED bulbs should bereplaced by an Authorized Mazda Dealer. NOTE LED bulb replacement is not possible. Therear combination component must be replaced. With Non-LED bulb 1. Pull...

Black plate (314,1) 4. Disconnect the bulb from the socket. 5. Install the new bulb in the reverse order of removal. NOTE To replace the bulb, contact an AuthorizedMazda Dealer. Rear turn signal lights (5 Door) 1. Remove the cover. Left side Right side 2. Turn the socket and bulb assembly counterclo...

Black plate (315,1) Reverse lights 4 Door 1. Pull the center section of the plastic retainer and remove the retainers, andthen remove the trunk rear trim. Removal Installation 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconnect the bulb from the socket. 4. Install the ...

Black plate (317,1) 2. Disconnect the bulb by pulling it out. Edge 3. Install the new bulb in the reverse order of removal. q Replacing Interior Light Bulbs Overhead light/Map lights (Front) í Due to the complexity and difficulty ofthe procedure, the bulbs should bereplaced by an Authorized Mazda De...

Black plate (318,1) 3. Disconnect the bulb by pulling it out. 4. Install the new bulb in the reverse order of removal. Fuses Your vehicle's electrical system isprotected by fuses. If any lights, accessories, or controls don'twork, inspect the appropriate circuitprotector. If a fuse has blown, the in...

Black plate (319,1) 3. Turn the knobs counterclockwise and lower the fuse block. 4. Locate the position of the suspected fuse by using the chart inside the fuseblock cover. 5. Pull the fuse straight out with the fuse puller provided on the inside of theengine compartment fuse block cover. 6. Inspect...

Black plate (321,1) q Fuse Panel Description Fuse block (Engine compartment) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Without turbocharger DESCRIPTION FUSE RATING PROTECTED COMPONENT 1 FAN 40A Cooling fan 2 P/ST 80A Power steering 3 BTN 40A F...

Black plate (326,1) How to MinimizeEnvironmental Paint Damage The paintwork on your Mazda representsthe latest technical developments incomposition and methods of application. Environmental hazards, however, canharm the paint's protective properties, ifproper care is not taken. Here are some example...

Black plate (327,1) q Water Marks Occurrence Rain, fog, dew, and even tap water cancontain harmful minerals such as salt andlime. If moisture containing theseminerals settles on the vehicle andevaporates, the minerals will concentrateand harden to form white rings. The ringscan damage your vehicle's...

Black plate (328,1) Exterior Care Follow all label and container directions when using a chemical cleaner or polish.Read all warnings and cautions. q Maintaining the Finish Washing CAUTION When the wiper lever is in the AUTOposition and the ignition switch is inthe ON position, the wipers maymove au...

Black plate (329,1) CAUTION Ø Don't use steel wool, abrasivecleaners, or strong detergentscontaining highly alkaline orcaustic agents on chrome-platedor anodized aluminum parts. Thismay damage the protectivecoating; also, cleaners anddetergents may discolor ordeteriorate the paint. Ø To prevent dama...

Black plate (330,1) q Repairing Damage to the Finish Deep scratches or chips on the finishshould be repaired promptly. Exposedmetal quickly rusts and can lead to majorrepairs. CAUTION If your Mazda is damaged and needsmetal parts repaired or replaced,make sure the body shop appliesanti-corrosion mat...

Black plate (331,1) q Aluminum Wheel Maintenance A protective coating is provided over thealuminum wheels. Special care is neededto protect this coating. NOTE l Don't use a wire brush or any abrasivecleaner, polishing compound, or solvent onaluminum wheels. They may damage thecoating. l Only use a m...

Black plate (332,1) To keep the fabric looking clean andfresh, take care of it. Otherwise its colorwill be affected, it can be stained easily,and its fire-resistance may be reduced. CAUTION Use only recommended cleaners andprocedures. Others may affectappearance and fire-resistance. Piano black pane...

Black plate (334,1) Customer Assistance (U.S.A.) Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement re...

Black plate (338,1) CAMVAP is fully implemented in all provinces and territories.Consumers wishing to obtain further information about the Program should contact theProvincial Administrator at 1 (800) 207-0685, or by contacting theCanadian Motor Vehicle Arbitration Plan Office at: Canadian Motor Veh...

Black plate (340,1) Customer Assistance (Mexico) Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement re...

Black plate (341,1) In order to serve you efficiently and effectively, please help us by providing the followinginformation: 1. Your name, address, and telephone number2. Year and model of vehicle3. Vehicle Identification Number (17 digits, noted on your registration or title or located on the upper...

Black plate (342,1) Importer/Distributor q U.S.A. Mazda North American Operations 7755 Irvine Center DriveIrvine, CA 92618-2922 U.S.A.P.O. Box 19734Irvine, CA 92623-9734 U.S.A.TEL: 1 (800) 222-5500 (in U.S.A.)(949) 727-1990 (outside U.S.A.) Distributor in Each Area q CANADA Mazda Canada Inc. 55 Voge...

Black plate (343,1) Triple J Saipan, Inc. (d.b.a. Triple J Motors) P.O. Box 500487 Saipan, MP 96950-0487TEL: (670) 234-7133/3051 q AMERICAN SAMOA Polynesia Motors, Inc. P.O. Box 1120, Pago Pago, AmericanSamoa 96799TEL: (684) 699-9347 Customer Information and Reporting Safety Defects Mazda Importer/D...

Black plate (344,1) Warranties for Your Mazda l New Vehicle Limited Warranty l Distributor Major Component Limited Warranty (Canada only) l Safety Restraint System Limited Warranty l Anti-perforation Limited Warranty l Federal Emission Control Warranty (U.S.A. only) l Emission Defect Warranty l Emis...

Black plate (345,1) Outside the United States Government regulations in the United States require that automobiles meet specificemission regulations and safety standards. Therefore, vehicles built for use in the UnitedStates may differ from those sold in other countries. The differences may make it ...

Black plate (346,1) Outside Canada Government regulations in Canada require that automobiles meet specific emissionregulations and safety regulations. Therefore, vehicles built for use in Canada may differfrom those sold in other countries. The differences may make it difficult or even impossible fo...

Black plate (349,1) Cell Phones Warning WARNING Please comply with the legal regulations concerning the use of communicationequipment in vehicles in your country: Use of any electrical devices such as cell phones, computers, portable radios, vehiclenavigation or other devices by the driver while the...

Black plate (350,1) Type Approval of Equipment Immobilizer system 9-18 Customer Information and Reporting Safety Defects Type Approval of Equipment Mazda3_8X41-EA-07F_Edition1 Page350Wednesday, April 25 2007 1:7 PM Form No.8X41-EA-07F

Black plate (351,1) Keyless entry system Customer Information and Reporting Safety Defects Type Approval of Equipment 9-19 Mazda3_8X41-EA-07F_Edition1 Page351Wednesday, April 25 2007 1:7 PM Form No.8X41-EA-07F

Black plate (352,1) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. NationalHighway Traffic Safety Administration for grading tires by tread wear, traction, andtemperature performance. q Tread Wear The tread wear grade is a compar...

Black plate (353,1) WARNING Keep your vehicle's tires properly inflated and not overloaded: Driving with improperly inflated or overloaded tires is dangerous. Excessive speed,underinflation, or excessive loading, either separately or in combination, can causeheat buildup and possible tire failure. T...

Black plate (354,1) Tire Labeling Federal law requires tire manufacturers to place standardized information on the sidewall ofall tires. This information identifies and describes the fundamental characteristics of the tireand also provides a tire identification number for safety standard certificati...

Black plate (356,1) H “ H ” is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated. Letter Rating Speed Rating Q 99 mph R 106 mph S 112 mph T 118 mph U 124 mph H 130 mph V 149 mph W 168 * mph Y 186 * mph * For tires with a maximum speed capability over...

Black plate (358,1) q Information on Temporary Tires Please refer to the diagram below. 1. Temporary tires 2. Nominal width of tire in millimeters 3. Ratio of height to width (aspect ratio) 4. Diagonal 5. Rim diameter code 6. Load index&speed symbol T115/70D 16 90M is an example of a tire size a...

Black plate (360,1) Location of the Tire Label (Placard) You will find the tire label containing tire inflation pressure by tire size and other importantinformation on the driver's side B-pillar or on the edge of the driver's door frame. SAMPLE q Recommended Tire Inflation Pressure On the tire label...

Black plate (361,1) WARNING Always check the tire inflation pressures on a regular basis according to therecommended tire inflation pressure on the tire label and in conjunction with theinformation in this owner's manual: Driving your vehicle with under-inflated tires is dangerous.Under-inflation is...

Black plate (362,1) q Glossary of Terms Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry. Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturi...

Black plate (363,1) Tire Maintenance Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here aresome important maintenance points: q Tire Inflation Pressure Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintainrecommended pressures for ...

Black plate (364,1) CAUTION Rotate unidirectional tires and radial tires that have an asymmetrical tread patternor studs only from front to rear, not from side to side. Tire performance will beweakened if rotated from side to side. (With limited-slip differential) Don't use the following: Ø Tires no...

Black plate (365,1) q Safety Practices The way you drive has a great deal to do with your tire mileage and safety. So cultivategood driving habits for your own benefit. l Observe posted speed limits l Avoid fast starts, stops and turns l Avoid potholes and objects on the road l Do no run over curbs ...

Black plate (366,1) Vehicle Loading WARNING Do not taw a trailer with this vehicle: Towing a trailer with this vehicle is dangerous because it has not been designed totow a trailer and doing so will affect the drive system which could result in vehicledamage. This section will guide you in the prope...

Black plate (367,1) Base Curb Weight is the weight of the vehicle including a full tank of fuel and allstandard equipment. It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket e...

Black plate (368,1) SAMPLE CARGO Cargo Weight includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part ofcargo weight. The cargo weight limit decreases depending on the number of vehicle occupants. The...

Black plate (369,1) Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg(849 lbs) for the “ combination weight of occupants and cargo should never exceed ” : The cargo weight limit with one occupant is 385 kg (849 lbs) _ 68 kg (150 lbs) = 317 kg(699 lbs)The cargo wei...

Black plate (370,1) SAMPLE WARNING Exceeding Axle Weight Rating Limits: Exceeding the Safety Certification Label axle weight rating limits is dangerous andcould result in death or serious injury as a result of substandard vehicle handling,performance, engine, transmission and/or structural damage, s...

Black plate (371,1) GCW GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the vehicle and the loaded trailer - including all cargo and passengers - that the v...

Black plate (372,1) WARNING Exceeding GVWR or GAWR Specifications: Exceeding the GVWR or the GAWR specified on the certification label is dangerous.Exceeding any vehicle rating limitation could result in a serious accident, injury, ordamage to the vehicle.Do not use replacement tires with lower load...

Black plate (373,1) Steps for Determining the Correct Load Limit: Steps for Determining Correct Load Limit:(1) Locate the statement “ The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs ” on your vehicle's placard. (2) Determine the combined weight of the driver and pass...

Black plate (374,1) Reporting Safety Defects (U.S.A.) If you believe that your vehicle has a defect which could cause a crash or couldcause injury or death, you should immediately inform the National HighwayTraffic Safety Administration (NHTSA) in addition to notifying Mazda MotorCorporation (Your M...

Black plate (376,1) Service Publications Factory-authorized Mazda service publications are available for owners who wish to dosome of their own maintenance and repair. When requesting any of our publications through an Authorized Mazda Dealer, refer to thechart below. If they don't have what you nee...

Black plate (379,1) 10 Specifications Technical information about your Mazda. Identification Numbers ............................................................... 10-2 Vehicle Information Labels ..................................................... 10-2 Specifications ................................

Black plate (380,1) Vehicle Information Labels q Vehicle Identification Number The vehicle identification number legallyidentifies your vehicle. The number is ona plate attached to the cowl panel locatedon the left corner of the dashboard. Thisplate can easily be seen through thewindshield. q Motor ...

Black plate (381,1) q Tire Pressure Label q Engine Number Without turbocharger Forward With turbocharger Forward Identification Numbers 10-3 Mazda3_8X41-EA-07F_Edition1 Page381Wednesday, April 25 2007 1:7 PM Form No.8X41-EA-07F

Black plate (382,1) Specifications q Engine Item Specification Without turbocharger With turbocharger 2.0-liter engine 2.3-liter engine Type DOHC-16V in-line, 4-cylinder Bore×Stroke 87.5 × 83.1 mm (3.44 × 3.27 in) 87.5 × 94.0 mm (3.44 × 3.70 in) Displacement 1,999 ml (1,999 cc, 122.0 cu in) 2,261 ml...

Black plate (383,1) q Capacities (Approximate Quantities) Item Capacity Engine oil Without turbocharger With oil filterreplacement 4.3 L (4.5 US qt, 3.8 Imp qt) Without oil filterreplacement 3.9 L (4.1 US qt, 3.4 Imp qt) With turbocharger With oil filterreplacement 5.7 L (6.0 US qt, 5.0 Imp qt) With...

Black plate (385,1) q Light Bulbs Exterior light Light bulb Category Wattage ECE R (SAE) Headlights High beam 60 HB3 (HB3) Low beam Halogen 55 H7 (H7) Xenon fusion 35 D2S (D2S) Front turn signal lights/Side-marker lights 27/8 ― (#1157NA) Fog lights í Type A 55 H11 (H11) Type B 51 HB4 (HB4) Side turn...

Black plate (387,1) 11 Index 11-1 Mazda3_8X41-EA-07F_Edition1 Page387Wednesday, April 25 2007 1:7 PM Form No.8X41-EA-07F