Mazda 2006 MPV - Manuals

Black plate (7,1) 1 Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Dashboard and Interior Overview .............................................. 1-2 Exterior Overview ......................................................................... 1-4 1-1 Mazda MP...

Black plate (8,1) The equipment and installation position varies by model. Power window lock switch ................................................................................ page 3-21Power window switches .................................................................................... pag...

Black plate (10,1) The equipment and installation position varies by model. 1-4 Your Vehicle at a Glance Exterior Overview Mazda MPV_8U61-EA-05G_Edition1 Page10Tuesday, June 21 2005 9:31 AM Form No.8U61-EA-05G

Black plate (13,1) 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags andchild-restraint systems. Seats ............................................................................................... 2-2 Seat Arrangements ..............................

Black plate (14,1) Seat Arrangements Road positions (while driving) Non-road positions (Parking/Camping) 2-2 Essential Safety Equipment Seats Mazda MPV_8U61-EA-05G_Edition1 Page14Tuesday, June 21 2005 9:31 AM Form No.8U61-EA-05G

Black plate (15,1) Front Seats (ManuallyOperated Seats) WARNING Modification of the Front Seats:Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodif...

Black plate (16,1) Make sure the lever returns to its originalposition and the seat is locked in place byattempting to push it forward andbackward. q Seat Recline WARNING Reclining:Sitting in a reclined position while thevehicle is moving is dangerousbecause you don't get the fullprotection from sea...

Black plate (17,1) CAUTION When returning a rear-reclined seatbackto its upright position, make sure youhold onto the seatback with your otherhand while operating the lever. If theseatback is not supported, it will flipforward suddenly and could causeinjury. q Height Adjustment (Driver's Seat) The s...

Black plate (18,1) Height adjustment To raise a head restraint, pull it up to thedesired position.To lower the head restraint, press the stop-catch release, then push the head restraintdown. Adjust the head restraint so that the top iseven with the top of the passenger's ears,never the passenger's n...

Black plate (19,1) NOTE The table can be expanded rearward bypulling out the rear end. When collapsing the table, pull the leverunder the table. After the table iscollapsed, press the table surface to lock itin place. q Armrest The armrest can be used or placed upright. WARNING Positioning the Shoul...

Black plate (21,1) q Seat Recline WARNING Reclining:Sitting in a reclined position while thevehicle is moving is dangerousbecause you don't get the fullprotection from seat belts. Duringsudden braking or a collision, you canslide under the lap belt and sufferserious internal injuries. Formaximum pro...

Black plate (22,1) Rear height adjustment Raise or lower the back of the switch toadjust the rear height of the seat-bottom. Height adjustment Raise the seat-bottom by pulling up on thecenter of the switch. Release the switch atthe desired position. Lower the seat-bottom by pressing downon the cente...

Black plate (23,1) Removal To remove the head restraint, press thestop-catch release, then pull up on thehead restraint. q Front Passenger Seat Side Table í WARNING Using Seat Side Table While Vehicle isMoving:Using the seat side table while thevehicle is moving is dangerous. Hotliquids could cause ...

Black plate (27,1) Height adjustment To raise a head restraint, pull it up to thedesired position.To lower the head restraint, press the stop-catch release, then push the head restraintdown. Adjust the head restraint so that the top iseven with the top of the passenger's ears,never the passenger's n...

Black plate (28,1) q Third-Row Seat Access Access to the third-row seat via thesliding door When the second-row seats are together,move along the path between the slidingdoor and the side sliding seat. When the second-row seats are separated,pass between them and move to the rearof the vehicle. q Fo...

Black plate (29,1) CAUTION Lowering the seatback without stowingthe seat belt buckle could damage theseatback. 3. Raise the reclining lever and lower the seatback forward. Make sure theseatback is locked. To return the seatback to the uprightposition Raise the reclining lever and lift theseatback up...

Black plate (30,1) WARNING Lifting the Seat-Anchor Bar:Lifting the seat-anchor bar withoutfirmly supporting the seat with yourhand is dangerous. Lifting the seatunlocks the front clampsautomatically and could cause the seatto fall. Support the seat firmly whilelifting the seat-anchor bar. To remove ...

Black plate (34,1) q Head Restraint WARNING Head Restraints Adjustment:Driving with the head restraintsadjusted too low or removed isdangerous. With no support behindyour head, your neck could beseriously injured in a collision. Alwaysdrive with the head restraints insertedwhen seats are being used ...

Black plate (35,1) 1. Remove the head restraints from the third-row seat (page 2-22). 2. Pull the third-row seat's flat-folding strap and push the seatback down untilit locks. q Stowing the Third-Row Seat More storage space can be created byfolding away the third-row seat into therear seat well. Wit...

Black plate (36,1) Stowing the third-row seat 1. Insert the seat belts in the retainers. 2. Remove the head restraint and set them aside temporarily (page 2-22). 3. Pull strap A and ease the seatback toward the front of the vehicle withyour other hand and be sure it lockswith a click. Strap A 4. Pul...

Black plate (38,1) q Third-Row Seat and OpenLiftgate Position WARNING Rear Facing Third-Row Seat and aMoving Vehicle:Driving with the third-row seat facingrearward is dangerous because theliftgate cannot be securely closed.During sudden braking or a collision,passengers could be thrown out of theveh...

Black plate (40,1) 3. From inside the vehicle, carefully lower the seat towards the front until itlocks in place. Attempt to move theseat forward and backward to makesure it's securely locked in place. 4. Reinsert the head restraints. 5. Place the seat belt buckles face up. 6. Fasten the shoulder be...

Black plate (41,1) q To Fold the Seats Flat 1. Slide the second-row seat all the way back (page 2-13). 2. Fold down the second-row seatbacks rearward until they lock (page 2-14). 3. Remove the head restraints from the front seats. Refer to Head Restraint(Manually Operated Seats)(page 2-5).Refer to H...

Black plate (42,1) Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and suddenstops. Mazda recommends that the driver and all passengers always wear seat belts. All of the outboard seat belt retractors are designed to keep the lap/shoulder belts out...

Black plate (43,1) WARNING One Belt, One Passenger:Using one seat belt for more than one person at a time is dangerous. A seat belt usedin this way can't spread the impact forces properly and the two passengers could becrushed together and seriously injured or even killed. Never use one belt for mor...

Black plate (45,1) Seat Belt (Except Center,Third-Row Position) q Fastening the Seat Belts 1. Grasp the tongue. 2. Slowly pull out the lap/shoulder belt. Tongue Belt 3. Insert the tongue into the buckle until you hear a click. Buckle Tongue WARNING Positioning the Shoulder Portion ofthe Seat Belt:Im...

Black plate (46,1) q Unfastening the Seat Belts Depress the button on the buckle. Button NOTE If a belt does not fully retract, inspect itfor kinks and twists. If it is still notretracting properly, have it inspected atan Authorized Mazda Dealer. To secure the outboard-rear seat beltswhen not in use...

Black plate (49,1) Center, Third-RowPosition Seat Belt q Fastening the Seat Belt 1. Pull the tongue to the desired length. 2. Insert it into the buckle until you hear a click. Tongue Buckle 3. Adjust the belt length. To lengthen the belt, hold the tongue ata right angle to the webbing and pull.To sh...

Black plate (50,1) q Unfastening the Seat Belt Depress the button on the buckle. Button Seat Belt Extender If your seat belt is not long enough, evenwhen fully extended, a seat belt extendermay be available to you at no charge fromyour Authorized Mazda Dealer.This extender will be only for you and f...

Black plate (51,1) WARNING Using an Extender That is Too Long:Using an extender that is too long isdangerous. The seat belt will not fitproperly. In an accident, the seat beltwill not provide adequate protectionand you could be seriously injured.Don't use the extender or choose oneshorter in length ...

Black plate (52,1) Seat Belt Warning Beep If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, a beep sound will be heardfor about 6 seconds. 2-40 Essential Safety Equipment Seat Belt Systems Mazda MPV_8U61-EA-05G_Edition1 Page52Tuesday, June 21 2005 9:32 AM...

Black plate (53,1) Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children small enough to usethem. You are required by law to use a child-restraint system for children in the U.S. and Canada.Check your local and state or provincial laws for specific requirem...

Black plate (55,1) WARNING Seating Children in a Child-Restraint System on the Front Passenger Seat:If your vehicle is equipped with front passenger seat weight sensors, the vehicle is alsoequipped with an air bag deactivation indicator light (page 2-51). Even with the frontpassenger seat weight sen...

Black plate (56,1) WARNING One Belt, One Passenger:Using one seat belt for more than one person at a time is dangerous. A seat belt usedin this way can't spread the impact forces properly and the two passengers could becrushed together and seriously injured or even killed. Never use one belt for mor...

Black plate (57,1) Installing Child-RestraintSystems Accident statistics reveal that a child issafer in the rear seats (both second-rowseats and third-row center seat). The frontpassenger's seat is clearly the worst choicefor any child under 12, and with rear-facing child-restraint systems it is cle...

Black plate (59,1) Anchor bracket location Tether strap position Tether strap Anchor bracket WARNING Child-Restraint Tether Usage:Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether or tetheranchor and result in injury. ...

Black plate (60,1) Anchor bracket location 3. Hook the tether strap by following the child-restraint system manufacturer'sinstructions. Tether strap position Anchor bracket Tether strap WARNING Child-Restraint Tether Usage:Using the tether or tether anchor tosecure anything but a child-restraintsyst...

Black plate (62,1) NOTE To check if your front seats have sideair bags:Every Mazda side air bag will have a “ SRS AIRBAG ” tag on the outboard shoulder of the front seats. WARNING Front Passenger's Seat Position:As your vehicle has front air bags anddoubly so if your vehicle has side airbags, a fron...

Black plate (63,1) q Front Passenger's Seat Child-Restraint System Installation 1. Slide the seat as far back as possible. 2. Secure the child-restraint system with the lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions....

Black plate (66,1) q LATCH Child-Restraint SystemInstallation Procedure (Second-Row Seats) 1. Slide the second-row seat as far back as possible. 2. Raise the reclining lever and lower the seatback forward. 3. Raise the seatback to the most upright position. Make sure the seatback issecurely latched ...

Black plate (67,1) Tether strap position Tether strap Anchor bracket WARNING Child-Restraint Tether Usage:Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether or tetheranchor and result in injury. Use thetether and tether...

Black plate (68,1) Supplemental Restraint Systems (SRS) Precautions The front and side supplemental restraint systems (SRS) include up to 4 air bags (verify “ SRS AIRBAG ” location indicator marks). They are located in: l The steering wheel hub (driver air bag) l The front passenger dashboard (front...

Black plate (72,1) Supplemental Restraint System Components The supplemental restraint systems (SRS) have two basic subsystems: l The air bag system with inflators and air bags. l The electrical system with crash sensors and diagnostic module. The air bags are mounted in the following locations: l T...

Black plate (73,1) q Front Air Bag System Components (1) (6) (10) (7) (6) (5) (4) (3) (2) (8) (9) (1) Driver seat slide position sensor (page 2-63)(2) Front seats(3) Front dual stage inflators and air bags(4) Front air bag sensor(5) Front passenger air bag deactivation indicator light (page 2-63)(6)...

Black plate (74,1) q Side Air Bag System Components í (4) (1) (3) (2) (1) Side inflators and air bags(2) Front seats(3) Crash sensors and diagnostic module (SAS unit)(4) Side crash sensor 2-62 Essential Safety Equipment í Some models. SRS Air Bags Mazda MPV_8U61-EA-05G_Edition1 Page74Tuesday, June 2...

Black plate (75,1) How the Air Bags Work q How the Front Air Bags Work When air bag crash sensors detect a frontal impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the front air bags and after the inflation, the front air bagsquickly ...

Black plate (78,1) WARNING Increasing the Total Seated Weight on the Front Passenger Seat:When an infant or small child sits on the front passenger seat, increasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 30 kg (66 lb) is dangerous. The front p...

Black plate (79,1) CAUTION l To assure proper deployment of the front air bag and to prevent damage to the sensorsin the front seat bottoms: l Do not place sharp objects on the front seat bottoms or leave heavy luggage onthem. l Do not spill any liquids on the front seats or under the front seats. l...

Black plate (80,1) q How the Side Air Bags Work í When air bag crash sensors detect a side impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the side air bags and after the inflation, the side air bagsquickly deflate.The side air bags ...

Black plate (83,1) l Vehicle roll-over may not provideenough side force to deploy the side airbags. l Side impacts with two-wheeledvehicles may not provide enough forceto deploy the side air bags. Non-activation of side air bag A side air bag will not normally inflate inthe following cases: l Collis...

Black plate (84,1) A system malfunction is indicated whenthe warning light constantly flashes,constantly illuminates or doesn'tilluminate at all when the ignition switchis turned to the ON position. If any ofthese occur, consult an Authorized MazdaDealer as soon as possible. The systemmay not work i...

Black plate (87,1) 3 Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustmentof various parts. Doors and Locks ........................................................................... 3-2 Keys ....................................................................

Black plate (88,1) Keys WARNING Keys and Children:Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. These new kinds of keys arefascinating to children. They couldplay with power windows or othercontrols, or even make the vehiclemov...

Black plate (89,1) Key extend/retract method (Retractabletype key) To extend the key, press the releasebutton. To retract the key, press the release buttonand rotate the key into the holder. Keyless Entry System í This system remotely locks and unlocksthe doors and the liftgate.It can also help you ...

Black plate (90,1) NOTE l The keyless entry system is designedto operate up to about 2.5 m (8 ft)from the center of the vehicle, butthis may vary due to localconditions. l The system doesn't operate when theignition switch is in the ON position. l If the transmitter does not operatewhen pressing a b...

Black plate (91,1) To confirm that all doors and the liftgatehave been locked, press the lock buttonagain within 5 seconds. If they are closedand locked, the horn will sound. NOTE (Without theft-deterrent system) The hazard warning lights will flashonce to indicate that all doors and theliftgate are...

Black plate (92,1) WARNING Operating Power Sliding Doors withTransmitter:Opening or closing the power slidingdoors with the keyless entry systemtransmitter while not watching thedoors move is dangerous. People oranimals could be injured when thedoors open along the rear sides andback to the rear fen...

Black plate (93,1) CAUTION l Install the battery with the positivepole ( ) facing down. Battery leakage could occur if it is notinstalled correctly. l When replacing the battery, becareful not to bend the electricalterminals or get oil on them. Also becareful not to get dirt in thetransmitter as it ...

Black plate (94,1) 5. Put in the new battery (CR1620 or equivalent) with the positive pole ( ) facing down. 6. Align the front and back covers and snap the transmitter shut. 7. Install the key to the transmitter. q Service If you have a problem with the keylessentry system, consult an AuthorizedMazd...

Black plate (95,1) WARNING Vehicles Left Unlocked:Leaving your vehicle unlocked isdangerous as children could lockthemselves in a hot vehicle, whichcould result in death. Also, a vehicleleft unlocked becomes an easy targetfor thieves and intruders. Always closeall the windows, lock the doors andtake...

Black plate (96,1) Sliding doors To lock a sliding door from the inside,push down the door-lock knob.To unlock, pull it up. Unlock Lock To lock a sliding door with the door-lockknob from the outside, push down thedoor-lock knob and close the door. NOTE The left-side sliding door cannot beopened when...

Black plate (98,1) q Rear Door Child Safety Locks These locks are intended to help preventchildren from accidentally opening thesliding doors. Use them both whenever achild rides in the vehicle.To lock the sliding doors, slide the childsafety locks to the lock position beforeclosing the doors. Unloc...

Black plate (101,1) NOTE l The left power sliding door cannotfully open when the fuel-filler lid isopen. To fully open the left powersliding door in this situation, carryout the following procedure: 1. Close the left power sliding door.2. Close the fuel-filler lid.3. Open the left power sliding door...

Black plate (102,1) Right power sliding door switch Left power sliding door switch NOTE l If a rear power sliding door switch ispressed again while the beep soundis being heard, the operation can becanceled. l Press a rear power sliding doorswitch to stop the power slidingdoors while they are openin...

Black plate (103,1) When the doors are completely open anda door is slid by the handle 5 cm (2 in) inthe direction of closing, the doors willcompletely close automatically after thebeep sound is heard. Jam-safe equipment While a door is opening/closingelectrically and the system detects aperson or a...

Black plate (104,1) WARNING Turn Power Sliding Doors MainSwitch OFF When Working onVehicle:Leaving the power sliding doors mainswitch in the ON position whileworking on the vehicle is dangerous.If the open/close switches aremistakenly pressed, the power slidingdoors will slide and hands or headcould...

Black plate (105,1) q Locking, Unlocking withTransmitter í The liftgate can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3). q Locking, Unlocking with Door-Lock Switch í The liftgate can be locked/unlocked byoperating the door-lock switch, ...

Black plate (107,1) Rear power windows To open a window to the desired position,press the lower part of the switch.To close a window to the desired position,press the upper part of the switch. Close Open q Power Window Lock Switch With the lock switch in the unlockedposition, all power windows on ea...

Black plate (108,1) Rear Quarter Windows Open or close a swing-out rear quarterwindow by releasing the latch and movingthe window. NOTE When parked in public areas, it is bestto keep the rear quarter windows closedfor security. q Opening a Window Pull the latch inward and then push thewindow outward...

Black plate (109,1) Fuel-Filler Lid and Cap WARNING Fuel Spray:Fuel spray is dangerous. Fuel canburn skin and eyes and cause illness ifingested. Fuel spray is released whenthere is pressure in the fuel tank andthe fuel cap is removed too quickly.When removing the fuel cap, loosenthe cap slightly and...

Black plate (110,1) CAUTION Make sure the fuel-filler cap istightened securely. The check enginelight may illuminate when the cap isn'ttightened securely. If the light remainson (even after you have tightened thecap securely, driven, and restarted theengine several times), it may indicate adifferent...

Black plate (111,1) 3. Use the support rod to hold the hood open. Clip Support rod q Closing the Hood 1. Check under the hood area to make certain all filler caps are in place andall loose items (e.g. tools, oilcontainers, etc.) have been removed. 2. Insert the support rod in its clip while holding ...

Black plate (112,1) NOTE After washing your Mazda or after arain, wipe the water off the moonroofbefore operating it to avoid waterpenetration which could cause rust andwater damage to your headliner. q Tilt Operation The rear of the moonroof can be tiltedopen to provide more ventilation. To tilt, p...

Black plate (114,1) Immobilizer System í The immobilizer system allows the engineto start only with a key the systemrecognizes. If someone attempts to start the enginewith an unrecognized key, the engine willnot start, thereby helping to prevent thetheft of your vehicle. CAUTION l Radio equipment li...

Black plate (115,1) NOTE l (U.S.A.) This device complies with Part 15 ofthe FCC Rules. Operation is subjectto the following two conditions: (1)this device may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operat...

Black plate (116,1) q Maintenance If you have a problem with theimmobilizer system or the key, consult anAuthorized Mazda Dealer. NOTE l The keys carry a unique electroniccode. For this reason, and to assureyour safety, obtaining replacementkey requires some waiting time.They are only available thro...

Black plate (117,1) q How to Arm the System 1. Remove the key from the ignition switch. 2. Make sure the hood is closed. Close and lock all doors and the liftgate fromthe outside using the key. If you havethe keyless entry system, press the lockbutton on the transmitter.The hazard warning lights wil...

Black plate (118,1) Steering Wheel WARNING Adjusting the Steering Wheel:Adjusting the steering wheel while thevehicle is moving is dangerous.Moving it can very easily cause thedriver to abruptly turn to the left orright. This can lead to loss of controlor an accident. Never adjust thesteering wheel ...

Black plate (119,1) 2. Depress the mirror switch in the appropriate direction. Mirror switch Selector switch After adjusting the mirror, lock the controlby moving the selector switch to themiddle position. Manual control mirror Adjust by hand. Folding the mirror Fold the outside mirror rearward unti...

Black plate (121,1) 4 Before Driving Your Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ........................................ 4-2 Fuel Requirements .................................................................... 4-2Emission Control System ............

Black plate (122,1) Fuel Requirements Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,which will reduce exhaust emissions and keep spark plug fouling to a minimum. Your Mazda will perform best with fuel listed in the table. Fuel Octane Rating * (Anti-knock index) Reg...

Black plate (123,1) Emission Control System Your vehicle is equipped with an emission control system (the catalytic converter is part ofthis system) that enables your vehicle to comply with existing exhaust emissionsrequirements. WARNING Parking Over Flammable Objects:Parking over or near anything f...

Black plate (126,1) Before Getting In l Be sure the windows, outside mirrors,and outside lights are clean. l Inspect inflation pressures andcondition of tires. l Look under the vehicle for any sign ofa leak. l If you plan to back up, make surenothing is in your way. NOTE Engine oil, engine coolant, ...

Black plate (127,1) Break-In Period No special break-in is necessary, but a fewprecautions in the first 1,000 km (600miles) may add to the performance,economy, and life of your Mazda. l Don't race the engine. l Don't maintain one constant speed,either slow or fast, for a long period oftime. l Don't ...

Black plate (128,1) Hazardous Driving WARNING Downshifting on Slippery Surfaces:Downshifting into lower gear whiledriving on slippery surfaces isdangerous. The sudden change in tirespeed could cause the tires to skid.This could lead to loss of vehiclecontrol and an accident. If it isnecessary to dow...

Black plate (129,1) Rocking the Vehicle WARNING Spinning the Wheels:When the vehicle is stuck, spinningthe wheels at high speed is dangerous.The spinning tire could overheat andexplode. This could cause seriousinjuries. Don't spin the wheels at morethan 56 km/h (35 mph), and don'tallow anyone to sta...

Black plate (130,1) WARNING Mixing Tire Types:Using tires different in size or type isdangerous. Your vehicle's handlingcould be greatly affected and result inan accident. Use only the same sizeand type tires (snow, radial, or non-radial) on all four wheels. CAUTION Check local regulations before us...

Black plate (131,1) Driving In Flooded Area WARNING Driving with Wet Brakes:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.Dry the brake...

Black plate (132,1) Trailer Towing Your Mazda was designed and built primarily to carry passengers and cargo.If you must tow a trailer, follow these instructions because driver and passenger safetydepends on proper equipment and safe driving habits. Towing a trailer will affect handling,braking, dur...

Black plate (133,1) TRAILER TOWING-LOAD TABLE Because vehicle weights vary, adjustments must be made to meet the requirements in thistable. Item Model With 4-Seasons Package Without 4-Seasons Package MAX. FRONTALAREA 2.97 m 2 (32 ft 2 ) MAX. TTW Add trailer's weight, load and hitch; vehiclepassenger...

Black plate (134,1) WARNING Tow Loads:Attempting to tow loads greater than those specified is dangerous as it may causeserious handling and performance problems that could result in personal injury orvehicle damage, or both. Always keep tow loads within specified limits in the TrailerTowing-Load Tab...

Black plate (135,1) WARNING Unsecured Hitch:An unsecured trailer hitch is dangerous as it causes greater trailer sway fromcrosswinds, rough roads or other causes, resulting in loss of control and a seriousaccident.Examine all trailer-hitch mounting bolts regularly and tighten any that are loose. Ift...

Black plate (136,1) q Safety Chains Safety chains must be used as a precautionary measure should the trailer becomeunintentionally unhitched. They should cross under the trailer tongue and attach to thehitch. Leave enough slack to allow full turns. Consult literature published by your trailer orhitc...

Black plate (137,1) q Trailer Towing Tips l Verify that your Mazda maintains a near-normal attitude when a loaded or unloadedtrailer is connected. Don't drive if it has an abnormal front-up or front-down position.Inspect for incorrect tongue load, worn suspension parts, and trailer overloading. l Ma...

Black plate (141,1) 5 Driving Your Mazda Explanation of instruments and controls. Starting and Driving ..................................................................... 5-2 Ignition Switch .......................................................................... 5-2Starting the Engine ............

Black plate (142,1) Ignition Switch q Ignition Switch Positions LOCK The steering wheel locks to protectagainst theft. Only in this position can thekey be removed. WARNING Removing the Key:It's dangerous to remove the key fromthe ignition switch while the vehicle ismoving. Removing the key allows th...

Black plate (143,1) Starting the Engine NOTE Engine-starting is controlled by thespark ignition system.This system meets all CanadianInterference-Causing EquipmentStandard requirements regulating theimpulse electrical field strength of radionoise. 1. Occupants should fasten their seat belts. 2. Make...

Black plate (144,1) Brake System q Foot Brake Your Mazda has power-assisted brakesthat adjust automatically through normaluse. Should power-assist fail, you can stop byapplying greater force than normal to thebrake pedal. But the distance required tostop will be greater than usual. WARNING Coasting ...

Black plate (145,1) Setting the parking brake Depress the brake pedal and then firmlypull the parking brake lever fully upwardswith a greater amount of force than isrequired so that the vehicle holds in thestationary position. Releasing the parking brake Depress the brake pedal and pull theparking b...

Black plate (146,1) NOTE Having to add brake fluid is sometimesan indicator of leakage. Consult anAuthorized Mazda Dealer as soon aspossible even if the brake light is nolonger illuminated. WARNING Brake Warning Light:Driving with the brake system warninglight on is dangerous. It indicates thatyour ...

Black plate (147,1) If the ABS warning light stays on whileyou're driving, the ABS control unit hasdetected a system malfunction. If thisoccurs, your brakes will function normallyas if the vehicle had no ABS.Should this happen, consult an AuthorizedMazda Dealer as soon as possible. NOTE l When the e...

Black plate (149,1) Automatic Transaxle Controls Indicates the shift lever can be shifted freely into any position. Indicates that you must pull the shift lever toward you to shift. Indicates that you must depress the brake pedal and pull the shift lever toward you to shift (The ignition switch must...

Black plate (151,1) q Shift-Lock System The shift-lock system prevents shiftingout of P unless the brake pedal isdepressed. To shift from P: 1. Depress and hold the brake pedal. 2. Start the engine. 3. Move the shift lever. NOTE l When the ignition switch is in theLOCK position, the shift levercanno...

Black plate (152,1) And for a smoother ride with less shifting,don't use it when: l Going up a steep grade. l Driving in stop-and-go traffic. l Pulling heavy loads. To turn off the overdrive, push thebutton. The transaxle will then shift through a 4-gear sequence in D.Shift patterns without overdriv...

Black plate (153,1) Power Steering Power steering is only operable when theengine is running. If the engine is off or ifthe power steering system is inoperable,you can still steer, but it requires morephysical effort. If the steering feels rigid during normaldriving, consult an Authorized MazdaDeale...

Black plate (154,1) q Cruise Set Indicator Light This light comes on when a cruising speedis set. q Activation/Deactivation To activate the system, press the ON/OFFswitch.The cruise main indicator lightilluminates. To deactivate the system, press the switchagain.The cruise main indicator light turns...

Black plate (155,1) NOTE l The SET function can't be activateduntil about 2 seconds after the ON/OFF switch has been engaged. l On a steep grade, the vehicle maymomentarily slow down going up orspeed up while going down. q To Increase Cruising Speed Follow either of these procedures. l Press the RES...

Black plate (156,1) q To Decrease Cruising Speed Press the SET/COAST button and hold it.The vehicle will gradually slow.Release the button at the speed you want. Your vehicle has a tap-down feature thatallows you to decrease your current speedin decrements of 1.6 km/h (1 mph) by amomentary tap of th...

Black plate (158,1) q TCS Indicator Light This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS isoperating, the indicator light flashes. If the light stays on, the TCS may have amalfunction and it may not operatecorrectly. Take your vehicle ...

Black plate (160,1) Meters and Gauges Speedometer ...................................................................................................... page 5-21Odometer, Trip Meter and Selector .................................................................... page 5-21Tachometer ..................

Black plate (161,1) q Speedometer The speedometer indicates the speed ofthe vehicle. q Odometer, Trip Meter and Selector The display mode can be changed fromodometer to trip meter A to trip meter Band then back to odometer by pressing theselector while one of them is displayed.The selected mode will...

Black plate (162,1) The trip meter records the total distancethe vehicle is driven until the meter isagain reset. Return it to “ 0.0 ” by holding the selector depressed for more than 1second. Use this meter to measure tripdistances and to compute fuelconsumption. NOTE l Only the trip meters record t...

Black plate (163,1) q Fuel Gauge The fuel gauge shows approximately howmuch fuel is in the tank. We recommendkeeping the tank over 1/4 full. When thelow fuel warning light illuminates orwhen the needle is near E, refuel as soonas possible. Low fuel warning light q Dashboard Illumination When the hea...

Black plate (164,1) Warning/Indicator Lights Warning/Indicator lights will appear in any of the highlighted areas Signal Warning/Indicator Lights Page Brake System Warning Light 5-26 Charging System Warning Light 5-27 Engine Oil Pressure Warning Light 5-28 Check Engine Light 5-28 ABS Warning Light 5...

Black plate (167,1) If the ABS warning light stays on whileyou're driving, the ABS control unit hasdetected a system malfunction. If thisoccurs, your brakes will function normallyas if the vehicle had no ABS.Should this happen, consult an AuthorizedMazda Dealer as soon as possible. NOTE l When the e...

Black plate (168,1) CAUTION Don't continue driving when thecharging system warning light isilluminated because the engine couldstop unexpectedly. q Engine Oil Pressure Warning Light This warning light illuminates when theignition switch is turned to the ONposition and turns off when the engine issta...

Black plate (169,1) q Air Bag/Front Seat BeltPretensioner System Warning Light If the air bag/front seat belt pretensionersystem is normal, the warning lightilluminates when the ignition switch isturned to the ON position or after theengine is cranked. After about 6 secondsit goes out. A system malf...

Black plate (170,1) q Immobilizer System Warning/Security Indicator Light í Immobilizer system warning light When the key is in the ignition switch,this light serves as the immobilizer systemwarning light. If the immobilizer system is workingproperly, the light will come on when theignition switch i...

Black plate (172,1) q Cruise Set Indicator Light í This light comes on when a cruising speedis set. q Turn-Signal/Hazard WarningIndicator Lights When operating the turn signal lights, theleft or right turn signal indicator lightflashes to indicate which turn signal lightis operating (page 5-34). Whe...

Black plate (173,1) Lighting Control q Headlights To turn on the lights, turn the headlightswitch on the end of the control lever. Switch Position Headlights Off Off On TaillightsParking lightsLicense lightsSide-marker lightsDashboardillumination Off On On NOTE To prevent discharging the battery, do...

Black plate (174,1) q Daytime Running Lights (CanadaModel) In Canada, vehicles must be driven withthe headlights on during daytimeoperation. For that reason, the daytime running lightsautomatically turn on when the ignitionswitch is turned to the ON position. NOTE The Daytime Running Lights turn off...

Black plate (175,1) Fog Lights í Use this switch to turn on the fog lights.They help you to see as well as to be seen. To turn the front fog lights on, rotate thefog light switch to the position. The headlight switch must be in theposition to turn on the front fog lights. Fog light switch To turn th...

Black plate (176,1) NOTE Because heavy ice and snow can jamthe wiper blades, the wiper motor isprotected from motor breakdown,overheating and possible fire by acircuit breaker. This mechanism willautomatically stop operation of theblades, but only for about 5 minutes.If this happens, turn off the wi...

Black plate (177,1) Rear Window Wiper andWasher The ignition switch must be in the ONposition. q Rear Window Wiper Turn the wiper on by turning the rearwiper/washer switch. ON ― Normal INT ― Intermittent q Rear Window Washer To spray washer fluid, turn the rear wiper/washer switch to the position. A...

Black plate (179,1) 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audiosystem. Climate Control System ............................................................... 6-2 Operating Tips .......................................................................

Black plate (180,1) Operating Tips q Operating the Climate ControlSystem Operate the climate control system withthe engine running. NOTE To prevent the battery from beingdischarged, do not leave the fan controldial on for a long period of time withthe ignition switch in the ACC positionwhen the engi...

Black plate (181,1) Vent Operation (Front) Knob Open Close q Adjusting the Vents Directing airflow You can direct air flow by moving the adjustment knob.Horizontal air flow can be adjusted by pressing the vent left or right. Opening/closing vents These vents can be opened and closed with wheel. NOTE...

Black plate (182,1) q Selecting the Airflow Mode Dashboard and Floor Vents Defroster Vents Floor Vents Dashboard Vents Defroster and Floor Vents 6-4 Interior Comfort Climate Control System Mazda MPV_8U61-EA-05G_Edition1 Page182Tuesday, June 21 2005 9:35 AM Form No.8U61-EA-05G

Black plate (183,1) Control Panel (Front) A/C 0 1 2 3 4 0 1 2 3 REAR Temperature control dial A/C switch Fan control dial Air intake selector switch Rear air-conditioner main switch Mode selector dial q Control Switches Temperature control dial Cold Hot This dial controls temperature. Turn itclockwi...

Black plate (184,1) Mode selector dial Turn the mode selector dial to selectairflow mode (page 6-4). A/C switch Push the A/C switch to turn the airconditioner on. The indicator light on theswitch will illuminate when the fancontrol dial is set at position 1, 2, 3, or 4. Push the switch once again to...

Black plate (185,1) WARNING The Recirculated Air Position:Using the position in cold or rainy weather will cause the windowsto fog up. Your vision will behampered, which could lead to aserious accident. Do not use theposition in cold or rainy weather. q Heating 1. Set the mode selector dial to the p...

Black plate (186,1) NOTE l When maximum cooling is desired,set the temperature control dial to theextreme cold position and set the airintake selector to the position, then set the fan control dial toposition 4. l If warmer air is desired at floor level,set the mode selector dial at theposition and ...

Black plate (189,1) q Selecting the Airflow Mode Floor Vents Roof Vents Interior Comfort Climate Control System 6-11 Mazda MPV_8U61-EA-05G_Edition1 Page189Tuesday, June 21 2005 9:35 AM Form No.8U61-EA-05G

Black plate (190,1) Control Panel (Rear) í Fan control dial Fan control dial Mode selector dial Type A NOTE: (Rear heater type) (Rear cooler type) Type B Supplies only hot air out of floor outlets. NOTE: Supplies cold or hot air out of roof vents or floor outlets. Supplies only cold air out of roof ...

Black plate (192,1) Antenna q Detachable Type To remove the antenna, turn itcounterclockwise.To install the antenna, turn it clockwise.Make sure the antenna is securelyinstalled. CAUTION To prevent damage to the antenna,remove it before entering a car washfacility or passing beneath a lowoverhead cl...

Black plate (193,1) q Radio Reception AM characteristics AM signals bend around such things asbuildings or mountains and bounce off theionosphere. Therefore, they can reachlonger distances than FM signals. Becauseof this, two stations may sometimes bepicked up on the same frequency at thesame time. ...

Black plate (197,1) q Operating Tips for CD Player/In-Dash CD Changer Condensation phenomenon Immediately after turning on the heaterwhen the vehicle is cold, the CD oroptical components (prism and lens) in theCD player/changer may become cloudedwith condensation. At this time, the CDwill eject imme...

Black plate (199,1) Audio Set í CD Player In-dash CD Changer Cassette Tape Player Mini Disc (MD) Player Illustration is of a representative audio unit. Power/Volume/Sound Controls .............................................................................. page 6-22Clock .............................

Black plate (200,1) q Power/Volume/Sound Controls Display Audio control dial Power/Volume dial Power ON/OFF Turn the ignition switch to the ACC orON position. Press the power/volume dial to turn theaudio system on.Press the power/volume dial again to turnthe audio system off. NOTE To prevent the bat...

Black plate (201,1) 2. Turn the audio control dial to adjust the selected functions as follows: * * Depending on the mode selected, the indication changes. Indication Turn Left Turn Right Decrease bass Increase bass Decrease mid-range Increase mid-range Decrease treble Increase treble Shift the soun...

Black plate (202,1) q Clock Display Clock button Hour set button Minute set button Setting the time The clock can be set at any time when theignition switch is in the ACC or ONposition. 1. To adjust the time, press the clock button ( ) for about 2 seconds until a beep is heard.The clock's current ti...

Black plate (203,1) NOTE l When the clock button ( ) is released, the seconds are reset to “ 00 ” . l If the power supply to the unit isinterrupted (if the fuse blows or thevehicle's battery is disconnected), theclock will need to be reset. Changing the display mode The display on the unit can be ch...

Black plate (204,1) q Operating the Radio Band selector button Display Channel preset buttons Manual tuning dial Scan button Satellite button* *For reception of optional SIRIUS digital satellite radio. Used on vehicles equipped with the separately sold SIRIUS digital satellite radio unit.For informa...

Black plate (205,1) Seek tuning Pressing the seek tuning button ( , ) will cause the tuner to seek a higher orlower frequency automatically. NOTE If you continue to press and hold thebutton, the frequency will continuechanging without stopping. Scan tuning Press the scan button ( ) to automatically ...

Black plate (206,1) q Operating the Cassette Tape Player í Display Cassette tape play button Cassette tape eject button Fast-forward button Program button Dolby NR button Repeat button (one being played) APC button: (next program) Rewind button Cassette tape insert Insert the cassette tape into the ...

Black plate (207,1) Dolby noise reduction When using a tape with Dolby NR*, pushthe Dolby NR button ( ). The symbol will be displayed. To play a tapewithout Dolby NR, push the button onceagain. * Noise reduction system manufactured under license from Dolby LaboratoriesLicensing Corporation.Dolby and...

Black plate (208,1) NOTE RPT may not operate properly if l A tape was recorded at a low level. l A tape has long, silent intervals. l A tape is a live recording. l A tape has very short intervals ofless than 3 seconds. 6-30 Interior Comfort Audio System Mazda MPV_8U61-EA-05G_Edition1 Page208Tuesday,...

Black plate (209,1) MEMO 6-31 Mazda MPV_8U61-EA-05G_Edition1 Page209Tuesday, June 21 2005 9:36 AM Form No.8U61-EA-05G

Black plate (210,1) q Operating the Mini Disc (MD) Player í MD play button Random button Repeat button Fast-forward button MD slot MD eject button MD display Main display Display feed dial Display button Scan button Reverse button MD display button Track down button Track up button Inserting the MD ...

Black plate (212,1) When long disc or song titles cannot becompletely displayed, press the MDdisplay button ( ) to display the remaining part of the title. 6-34 Interior Comfort Audio System Mazda MPV_8U61-EA-05G_Edition1 Page212Tuesday, June 21 2005 9:36 AM Form No.8U61-EA-05G

Black plate (214,1) q Operating the Compact Disc (CD) Player í Display CD slot CD play button CD eject button Random button Repeat button Fast-forward button Disc-in indicator Track up button Track down button Scan button Reverse button Inserting the CD Insert the CD into the slot, label-side up.The...

Black plate (216,1) q Operating the In-Dash CD Changer í CD eject button Load button Random button Repeat button Disc up button Reverse button Power/Volume dial Display CD slot CD play button Channel preset buttons Disc-in indicator Track up button Track down button Disc down button Scan button Fast...

Black plate (219,1) q Error Indications If you see an error indication on the display, find the cause in the chart. If you cannot clearthe error indication, take the vehicle to an Authorized Mazda Dealer. Indication Cause Solution CHECK MD MD is inserted upside down Insert the MD properly. If the er...

Black plate (220,1) Audio Control SwitchOperation (Steering Wheel) í NOTE Mazda has installed this system toprevent distraction while driving thevehicle and using audio controls on thedashboard.Always make safe driving your firstpriority. q Adjusting the Volume To increase the volume, press the volu...

Black plate (221,1) q Seek Switch When listening to the radio Press the seek switch ( , ), the radio switches to the next/previous storedstation in the order that it was stored(1 ― 6). Press the seek switch ( , ) for about 2 seconds until a beep sound is heard toseek all usable stations at a higher ...

Black plate (223,1) Sunvisors When you need a sunvisor, lower it foruse in front or swing it to the side. Sunvisor q Side Extention Sunvisors The visor extender extends the sunvisor'srange of sun shading.To use, pull it out. CAUTION When moving the sunvisor, reinsert thevisor extender, otherwise the...

Black plate (224,1) Interior Lights q Illuminated Entry System í When the illuminated entry systemoperates, the overhead light (switch is inthe DOOR position), the luggagecompartment light (switch is in the ONposition) and the courtesy lights turn onfor: l About 30 seconds after the driver'sdoor is ...

Black plate (225,1) With moonroof Switch Position Front Overhead Lights Light off l Light on when any door or theliftgate is open l (With illuminated entry system)Light on or off when theilluminated entry system is on Rear Switch Position Rear Overhead Lights Light off l Light on when any door or th...

Black plate (226,1) With moonroof Map light Map light q Luggage Compartment Light Switch Position Luggage Compartment Light Light off l Light on when any door or theliftgate is open l (With illuminated entry system) Light on or off when theilluminated entry system is on q Courtesy Lights Turns on wh...

Black plate (229,1) Cup Holder WARNING Using Cup Holder:Using a cup holder to hold hot liquidswhile the vehicle is moving isdangerous. If the contents spill, youcould be scalded. Never use a cupholder to hold hot liquids while thevehicle is moving. Don't Put Anything Other Than Cupsor Drink cans in ...

Black plate (231,1) Bottle Holder Bottle holders are on the inside of thesliding doors. CAUTION Don't use the bottle holders forcontainers without caps. The contentsmay spill when the door is opened orclosed. Storage Compartments WARNING Open Storage Boxes:Driving with the storage boxes open isdange...

Black plate (232,1) 3. Open the cap by pushing it from inside the box. Cap 4. Store the garage door opener by adjusting the thickness with theurethane spacers. q Eyeglass Holder í Push the lid to open. q Glove Box To open the glove box, pull the latchtoward you.Insert the key and turn it clockwise t...

Black plate (233,1) q Under Seat Tray (FrontPassenger Seat Only) Lift the latch and pull the tray forward. q Storage Box (In Seat Side Table) To use the storage box 1. Raise the table (page 2-6) (page 2-11). 2. Push the button to open. Button To collapse the table 1. Close the lid on the storage box...

Black plate (234,1) q Cargo Securing Loops WARNING Not Securing Luggage and Cargo:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury. Make sureluggage and cargo is secured beforedriving. Use the loops in the luggage compart...

Black plate (235,1) Accessory Sockets í The ignition switch must be in the ACCor ON position.Only use genuine Mazda accessories orthe equivalent requiring no greater than120 W (DC 12 V, 10 A). Front Cap Rear CAUTION To prevent accessory socket damage orelectrical failure, pay attention to thefollowi...

Black plate (237,1) 7 In Case of an Emergency Helpful information on what to do in an emergency. Parking in an Emergency ............................................................. 7-2 Parking in an Emergency .......................................................... 7-2 Flat Tire ...................

Black plate (238,1) Parking in an Emergency The hazard warning lights should alwaysbe used when you stop on or near aroadway. The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it. Depress the hazard warning flasher and a...

Black plate (239,1) Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram. Spare tire Tool bag Jack Spare tire lever Lug wrench Jack lever Tire clamp Flat tire securing bolt Vinyl bag In Case of an Emergency Flat Tire 7-3 Mazda MPV_8U61-EA-05G_Editio...

Black plate (240,1) q Jack To remove the jack 1. Remove the cover. 2. Remove the tool bag. 3. Turn the wing bolt counterclockwise. To secure the jack Perform the removal procedure in reverse. q Spare Tire Your Mazda has a temporary spare tire.The temporary spare tire is lighter andsmaller than a con...

Black plate (241,1) CAUTION l When using the temporary spare tire,driving stability may decreasecompared to when using only theconventional tire. Drive carefully. l To avoid damage to the temporaryspare or to the vehicle, observe thefollowing precautions: l Don't exceed 80 km/h (50 mph). l Avoid dri...

Black plate (243,1) 8. Rotate the small lever on top of the retaining plate and pull the retainingplate out from the center hole of thetire. NOTE A flat tire which has been removedfrom the vehicle for repair cannot becarried in the spare tire carrier. Securethe flat tire with the tire clamp and wing...

Black plate (244,1) CAUTION Applying excessive lateral force whilethe spare tire lever is attached mayresult in damage to the socket. NOTE Unless the cable is rolled upcompletely, the spare tire lever cannotbe removed from the socket. 3. Replace the spare tire carrier cap in the socket and turn it u...

Black plate (245,1) Changing a Flat Tire NOTE If the following occurs while driving, itcould indicate a flat tire. l Steering becomes difficult. l The vehicle begins to vibrateexcessively. l The vehicle pulls in one direction. If you have a flat tire, drive slowly to alevel spot that is well off the...

Black plate (246,1) q Removing a Flat Tire 1. If your vehicle is equipped with a wheel cover, pry off the wheel coverwith the beveled end of the jack lever. NOTE Force the end of the jack lever firmlybetween wheel and cover, or removalwill be difficult. CAUTION Align the notch on the wheel coverwith...

Black plate (247,1) WARNING Incorrect Jacking Position:Attempting to jack the vehicle inpositions other than thoserecommended in this manual isdangerous. The vehicle could slip offthe jack and seriously injure or evenkill someone. Use only the front andrear jacking positions recommendedin this manua...

Black plate (248,1) q Locking Lug Nuts í If your vehicle has optional antitheftwheel lug nuts, one on each wheel willlock the tires and you must use a specialkey to unlock them. This key is attachedto the lug wrench and is stored with thespare tire. Register them with the lockmanufacturer by filling...

Black plate (249,1) 2. Mount the spare tire. 3. Install the lug nuts with the beveled edge inward; tighten them by hand. WARNING Don't Apply Oil or Grease to LugNuts, Bolts:Applying oil or grease to lug nuts andbolts is dangerous. The lug nuts couldloosen while driving and cause the tireto come off,...

Black plate (250,1) WARNING Loose Lug Nuts:Improperly or loosely tightened lugnuts are dangerous. The wheel couldwobble or come off. This could resultin loss of vehicle control and cause aserious accident. Always securely andcorrectly tighten the lug nuts. Metric Studs and Lug Nuts:Because the wheel...

Black plate (252,1) Overheating If the temperature gauge indicatesoverheating, the vehicle loses power, oryou hear a loud knocking or pingingnoise, the engine is probably too hot. WARNING Cooling Fan and Engine Inspection:Inspecting the engine with the ignitionswitch in the ON position isdangerous. ...

Black plate (254,1) Starting a Flooded Engine If the engine fails to start, it may beflooded (excessive fuel in the engine). Follow this procedure: 1. Depress the accelerator all the way and hold it there. 2. Turn the ignition switch to the START position and hold it there ― for up to 10 seconds. If...

Black plate (255,1) Jump-Starting Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If youfeel unsure about jump-starting, we strongly recommend that you have a competent servicetechnician do the work. WARNING Follow These Precautions Carefully: To ensure safe and co...

Black plate (256,1) WARNING Keep Flames Away: Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames includingcigarettes a...

Black plate (259,1) Towing Description We recommend that towing be done onlyby an Authorized Mazda Dealer or acommercial tow-truck service. Proper lifting and towing are necessary toprevent damage to the vehicle.Government and local laws must befollowed. A towed vehicle usually should have itsfront ...

Black plate (261,1) 8 Maintenance and Care How to keep your Mazda in top condition. Introduction .................................................................................. 8-2 Introduction ............................................................................... 8-2 Scheduled Maintenan...

Black plate (262,1) Introduction Be extremely careful and prevent injury to yourself and others or damage to your vehiclewhen using this manual for inspection and maintenance. If you're unsure about any procedure it describes, we strongly urge you to have a reliableand qualified service shop perform...

Black plate (263,1) Scheduled Maintenance Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply.If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2). l Repeated short-distance driving l Driving in dusty conditions l Driving...

Black plate (264,1) q Schedule 1 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60 ENGINE Engine oil R R R R R R R R Engine oil filter R R R R R R R R Drive belt...

Black plate (266,1) q Schedule 2 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 96 ×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60 ENGINE Engine oil Puerto Rico Replace every 5,000 km...

Black plate (268,1) Owner Maintenance Schedule The owner or a qualified service technician should make these vehicle inspections at theindicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified servicetechnician as soon ...

Black plate (269,1) Owner Maintenance Precautions Improper or incomplete service may result in problems. This section gives instructions onlyfor items that are easy to perform. As explained in the Introduction (page 8-2), several procedures can be done only by aqualified service technician with spec...

Black plate (270,1) Engine Compartment Overview Automatic transaxle fluid-level dipstick Cooling system cap Engine coolant reservoir Power steering fluid reservoir Windshield washer fluid reservoir Engine oil dipstick Engine oil-filler cap Engine oil filter Battery Fuse block Air filter Brake fluid ...

Black plate (271,1) Engine Oil q Recommended Oil Use SAE 5W-20 engine oil. Oil container labels provide importantinformation.A chief contribution this type of oil makesto fuel economy is reducing the amount offuel necessary to overcome enginefriction. U.S.A. and CANADA (ILSAC) Only use oils “ Certif...

Black plate (272,1) The quality designation SL, or ILSACmust be on the label. 5W-20 120 100 80 60 40 20 0 –20 50 40 30 20 10 0 –10 –20 –30 q Inspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 2. Warm up the engine to normal operating temperature. 3. Turn it off and wait at lea...

Black plate (273,1) Changing engine oil WARNING Checking or Changing Engine Oil:Hot engine oil is dangerous. If theengine has been running, the engineoil becomes very hot. You could beseriously burned. Don't check orchange the engine oil when the engineis hot. 1. Warm up the engine for a few minutes...

Black plate (274,1) Engine Coolant q Inspecting Coolant Level WARNING Hot Engine:A hot engine is dangerous. If theengine has been running, parts of theengine compartment can become veryhot. You could be burned. Carefullyinspect the engine coolant in thecoolant reservoir, but do not open it.Do not us...

Black plate (275,1) q Changing Coolant (Without RearHeater) Change coolant according to ScheduledMaintenance (page 8-3). CAUTION l Use only soft (demineralized) waterin the coolant mixture. Water thatcontains minerals will cut down onthe coolant's effectiveness. l Don't add only water. Always add ap...

Black plate (276,1) To change coolant WARNING Removing the Cooling System Cap:Removing the cooling system capwhile the engine is running or hot isdangerous. This might lead to coolingsystem and engine damage and couldresult in serious injury from escapinghot coolant or steam. Turn off theengine and ...

Black plate (277,1) Brake Fluid q Inspecting Brake Fluid Level Inspect the fluid level in the reservoirregularly. It should be kept at MAX.The level normally drops withaccumulated distance, a conditionassociated with wear of brake linings. If itis excessively low, have the brake systeminspected by a...

Black plate (278,1) Power Steering Fluid q Inspecting Power Steering FluidLevel CAUTION To avoid damage to the power steeringpump, don't operate the vehicle for longperiods when the power steering fluidlevel is low. NOTE Use specified power steering fluid(page 10-4). Inspect the fluid level in the r...

Black plate (279,1) WARNING Sudden Vehicle Movement:Shifting the shift lever without firstdepressing the brake pedal isdangerous. The vehicle could movesuddenly and cause an accident.Make sure the brake pedal is appliedbefore shifting the shift lever. 4. With the engine still idling, pull out the di...

Black plate (280,1) Washer Fluid q Inspecting Washer Fluid Level WARNING Substitute Washer Fluid:Using radiator antifreeze as washerfluid is dangerous. If sprayed on thewindshield, it will dirty the windshield,affect your visibility, and could resultin an accident. Use only windshieldwasher fluid or...

Black plate (281,1) Body Lubrication All moving points of the body, such asdoor and hood hinges and locks, shouldbe lubricated each time the engine oil ischanged. Use a nonfreezing lubricant onlocks during cold weather. Make sure the hood's secondary latchkeeps the hood from opening when theprimary ...

Black plate (282,1) 2. Separate the air cleaner housing and remove the filter. Air filter Air cleaner housing 3. Wipe inside the air cleaner housing with a damp cloth. 4. Clean or replace the filter. 5. Install in the reverse order of removal. Replace the filter according to ScheduledMaintenance (pa...

Black plate (283,1) 1. Raise the wiper arm and turn the blade assembly to expose the plastic lockingclip.Compress the clip and slide theassembly downward; then lift it off thearm. Plastic locking clip CAUTION To prevent damage to the windshield letthe wiper arm down easily, don't let itslap down on ...

Black plate (284,1) 4. Carefully insert the new blade rubber. Then install the blade assembly in thereverse order of removal. NOTE Install the blade so that the tabs aretoward the bottom of the wiper arm. q Replacing Rear Window WiperBlade When the wiper no longer cleans well, theblade is probably w...

Black plate (286,1) Battery WARNING Battery-Related Lead Materials:Battery posts, terminals and related accessories contain lead and lead compounds,chemicals known to the State of California to cause cancer and reproductive harm.Wash hands after handling. Follow These Precautions Carefully: To ensur...

Black plate (287,1) WARNING Keep Flames Away: Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames includingcigarettes a...

Black plate (289,1) q Tire Inflation Pressure WARNING Incorrect Tire Inflation:Overinflation or underinflation of tiresis dangerous. Adverse handling orunexpected tire failure could result ina serious accident. Always inflate thetires to the correct pressure (page10-6). Inspect all tire pressures mo...

Black plate (290,1) q Tire Rotation To equalize tread wear, rotate the tiresevery 12,000 km (7,500 miles)/8,000km * (5,000 miles) or sooner if irregular wear develops. During rotation, inspectthem for correct balance. * Unique driving conditions for U.S.A., Canada and Puerto Rico Do not include (TEM...

Black plate (291,1) NOTE Tires degrade over time, even whenthey are not being used on the road. It isrecommended that tires generally bereplaced when they are 6 years or older.Heat caused by hot climates or frequenthigh loading conditions can acceleratethe aging process. You should replacethe spare ...

Black plate (292,1) q Replacing a Wheel WARNING Using a Wrong-Sized Wheel:Using a wrong-sized wheel isdangerous. Braking and handlingcould be affected, leading to loss ofcontrol and an accident. Always usewheels of the correct size on yourvehicle. CAUTION A wrong-sized wheel may adverselyaffect: l T...

Black plate (293,1) Light Bulbs Some models. Overhead light Overhead lights/Map lights Parking lights Headlights Fog lights Brake lights/TaillightsRear turn signal lights Reverse lights Taillights/Rear side-marker lights Luggage compartment light License plate lights High-mount brake light Front tur...

Black plate (294,1) WARNING Handling Halogen Bulbs:When a halogen bulb breaks, it isdangerous. These bulbs containpressurized gas. If one is broken, itwill explode and serious injuries couldbe caused by the flying glass.If the glass portion is touched withbare hands, body oil could cause thebulb to ...

Black plate (295,1) NOTE l If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used. l Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children. l When reinstalling the sealing cover,m...

Black plate (296,1) 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Remove the bulb by pushing it in slightly and turning itcounterclockwise. 5. Install the new bulb in the reverse order of removal. Side turn signal lights 1. Slide the unit as shown in the figure to remove it...

Black plate (297,1) 4. Install the new bulb in the reverse order of removal. High-mount brake lights 1. Remove the liftgate upper trim. 2. Push the tab as shown in the figure, and then remove the high-mount brakelight unit. 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disc...

Black plate (298,1) Without moonroof, with overheadconsole Edge Without either moonroof or overheadconsole Edge With moonroof Edge 3. Install the new bulb in the reverse order of removal. Overhead light, Courtesy lights, Vanitymirror lights í 1. Wrap a small flathead screwdriver with a soft cloth to...

Black plate (299,1) Vanity mirror lights Edge 3. Install the new bulb in the reverse order of removal. Luggage compartment light 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the trim andgently insert it in the luggagecompartment light as shown in thefigure, and then remove t...

Black plate (300,1) 3. Pull the fuse straight out with the fuse puller provided on the fuse panel. 4. Inspect it and replace if it's blown. Normal Blown 5. Push in a new fuse of the same amperage rating, and make sure it fitstightly. If it doesn't, have an AuthorizedMazda Dealer install it.If you ha...

Black plate (301,1) q Fuse Panel Description Fuse block (Engine compartment) DESCRIPTION FUSE RATING PROTECTED COMPONENT 1 DEFOG 40A Rear window defroster 2 BTN 60A STOP, HAZARD, ROOM, D.LOCK and DRL fuses 3 ABS 60A Antilock brake system í , For protection of various circuits 4 FAN1 30A Cooling fan ...

Black plate (304,1) How to MinimizeEnvironmental Paint Damage The paintwork on your Mazda representsthe latest technical developments incomposition and methods of application. Environmental hazards, however, canharm the paint's protective properties, ifproper care is not taken. Here are some example...

Black plate (305,1) q Water Marks Occurrence Rain, fog, dew, and even tap water cancontain harmful minerals such as salt andlime. If moisture containing theseminerals settles on the vehicle andevaporates, the minerals will concentrateand harden to form white rings. The ringscan damage your vehicle's...

Black plate (306,1) Exterior Care Follow all label and container directions when using a chemical cleaner or polish.Read all warnings and cautions. q Maintaining the Finish Washing To help protect the finish from rust anddeterioration, wash your Mazdathoroughly and frequently, at least once amonth, ...

Black plate (307,1) Insects, tar, tree sap, bird droppings,industrial fallout, and similar deposits candamage the finish if not removedimmediately. When prompt washing withplain water is ineffective, use a mild soapmade for use on vehicles. Thoroughly rinse off all soap withlukewarm or cold water. D...

Black plate (308,1) CAUTION Don't use steel wool, abrasive cleaners,or strong detergents containing highlyalkaline or caustic agents on chrome-plated or anodized aluminum parts.This may result in damage to theprotective coating and causediscoloration or paint deterioration. q Underbody Maintenance R...

Black plate (309,1) Interior Care q Dashboard Precautions Prevent caustic solutions such as perfumeand cosmetic oils from contacting thedashboard. They'll damage and discolor it.If these solutions get on the dashboard,wipe them off immediately. CAUTION Do not use glazing agents.Glazing agents contai...

Black plate (310,1) q Cleaning the Window Interiors If the windows become covered with anoily, greasy, or waxy film, clean themwith glass cleaner. Follow the directionson the container. CAUTION Don't scrape or scratch the inside of therear window. You may damage the rearwindow defroster grid. 8-50 M...

Black plate (312,1) Customer Assistance (U.S.A.) Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement re...

Black plate (316,1) CAMVAP is fully implemented in all provinces and territories.Consumers wishing to obtain further information about the Program should contact theProvincial Administrator at 1 (800) 207-0685, or by contacting theCanadian Motor Vehicle Arbitration Plan Office at: Canadian Motor Veh...

Black plate (318,1) Importer/Distributor q U.S.A. Mazda North American Operations 7755 Irvine Center DriveIrvine, CA 92618-2922 U.S.A.P.O. Box 19734Irvine, CA 92623-9734 U.S.A.TEL: 1 (800) 222-5500 (in U.S.A.)(949) 727-1990 (outside U.S.A.) Distributor in Each Area q CANADA Mazda Canada Inc. 55 Voge...

Black plate (319,1) Warranties for Your Mazda l New Vehicle Limited Warranty l Distributor Major Component Limited Warranty (Canada only) l Safety Restraint System Limited Warranty l Anti-perforation Limited Warranty l Federal Emission Control Warranty (U.S.A. only) l Emission Defect Warranty l Emis...

Black plate (320,1) Outside the United States Government regulations in the United States require that automobiles meet specificemission regulations and safety standards. Therefore, vehicles built for use in the UnitedStates may differ from those sold in other countries. The differences may make it ...

Black plate (321,1) Outside Canada Government regulations in Canada require that automobiles meet specific emissionregulations and safety regulations. Therefore, vehicles built for use in Canada may differfrom those sold in other countries. The differences may make it difficult or even impossible fo...

Black plate (324,1) Cell Phones Warning WARNING Use of Cell Phones and Other Devices by Driver:Use of any electrical devices such as cell phones, computers, portable radios, vehiclenavigation or other devices by the driver while the vehicle is moving is dangerous.Dialing a number on a cell phone whi...

Black plate (325,1) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. NationalHighway Traffic Safety Administration for grading tires by tread wear, traction, andtemperature performance. q Tread Wear The tread wear grade is a compar...

Black plate (326,1) WARNING The temperature grade for this tire is established for a tire that is properly inflated andnot overloaded. Excessive speed, underinflation, or excessive loading, eitherseparately or in combination, can cause heat buildup and possible tire failure. These grades will be add...

Black plate (327,1) Tire Labeling Federal law requires tire manufacturers to place standardized information on the sidewall ofall tires. This information identifies and describes the fundamental characteristics of the tireand also provides a tire identification number for safety standard certificati...

Black plate (328,1) 11. Tread wear, traction and temperature grades 12. Max. permissible inflation pressure 13. SAFETY WARNING P215/65R15 95H is an example of a tire size and load index rating. Here is an explanationof the various components of that tire size and load index rating. Note that the tir...

Black plate (329,1) H “ H ” is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated. Letter Rating Speed Rating Q 99 mph R 106 mph S 112 mph T 118 mph U 124 mph H 130 mph V 149 mph W 168 * mph Y 186 * mph * For tires with a maximum speed capability over...

Black plate (331,1) q Information on Temporary Tires Please refer to the diagram below. 1. Temporary tires 2. Nominal width of tire in millimeters 3. Ratio of height to width (aspect ratio) 4. Diagonal 5. Rim diameter code T115/70D 16 is an example of a tire size and load index rating. Here is an ex...

Black plate (333,1) Location of the Tire Label (Placard) You will find the tire label containing tire inflation pressure by tire size and other importantinformation on the driver's side B-pillar or on the edge of the driver's door. SAMPLE q Recommended Tire Inflation Pressure On the tire label you w...

Black plate (334,1) WARNING Tire Under-Inflation:Driving your vehicle with under-inflated tires is dangerous.Under-inflation is the most common cause of failures in any kind of tire and mayresult in severe cracking, tread separation or “ blowout ” , with unexpected loss of vehicle control and increa...

Black plate (335,1) NOTE Warm tires normally exceed recommended pressures. Don't release air from warm tiresto adjust the pressure.Under-inflation can cause serious failures and accidents.Over-inflation can produce a harsh ride and the greater possibility of damage from roadhazards. q Glossary of Te...

Black plate (336,1) Tire Maintenance Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here aresome important maintenance points: q Tire Inflation Pressure Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintainrecommended pressures for ...

Black plate (337,1) CAUTION Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern orstuds only from front to rear, not from side to side. Tire performance will be weakened ifrotated from side to side. (With limited-slip differential) Don't use the following: l Tires no...

Black plate (338,1) NOTE Tires degrade over time, even when they are not being used on the road. It isrecommended that tires generally be replaced when they are 6 years or older. Heatcaused by hot climates or frequent high loading conditions can accelerate the agingprocess. You should replace the sp...

Black plate (339,1) Vehicle Loading This section will guide you in the proper loading of your vehicle and/or trailer, to keepyour loaded vehicle weight within its design rating capability, with or without a trailer.Properly loading your vehicle will provide maximum return of vehicle design performan...

Black plate (340,1) Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment. PAYLOAD Payload is the combined weight of cargo and passengers that the vehicle is designed to carry. The maximum payload for your vehicle can be found on ...

Black plate (341,1) SAMPLE CARGO Cargo Weight includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part ofcargo weight. The cargo weight limit decreases depending on the number of vehicle occupants. The...

Black plate (342,1) Examples: Based on a single occupant weight of 68 kg, and a value of 385 kg for the “ combined weight of occupants and cargo should never exceed ” : The cargo weight limit with one occupant is 385 kg _ 68 kg = 317 kgThe cargo weight limit with two occupants is 385 kg _ (68 × 2) k...

Black plate (344,1) GCW GCW (Gross Combined Weight) is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) is the maximum allowable weight of the vehicle and the loaded trailer - including all cargo and passengers - that the vehicle...

Black plate (346,1) Steps for Determining the Correct Load Limit: Steps for Determining Correct Load Limit: (1) Locate the statement “ The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs ” on your vehicle's placard. (2) Determine the combined weight of the driver and pas...

Black plate (347,1) Reporting Safety Defects (U.S.A.) If you believe that your vehicle has a defect which could cause a crash or couldcause injury or death, you should immediately inform the National HighwayTraffic Safety Administration (NHTSA) in addition to notifying Mazda MotorCorporation (Your M...

Black plate (349,1) Service Publications Factory-authorized Mazda service publications are available for owners who wish to dosome of their own maintenance and repair. When requesting any of our publications through an Authorized Mazda Dealer, refer to thechart below. If they don't have what you nee...

Black plate (351,1) 10 Specifications Technical information about your Mazda. Identification Numbers ............................................................... 10-2 Vehicle Information Labels ..................................................... 10-2 Specifications ................................

Black plate (352,1) Vehicle Information Labels q Vehicle Identification Number The vehicle identification number legallyidentifies your vehicle. The number is ona plate attached to the left top side of thedashboard. This plate can easily be seenthrough the windshield. q Motor Vehicle Safety Standard...

Black plate (353,1) q Engine Number Forward Identification Numbers 10-3 Mazda MPV_8U61-EA-05G_Edition1 Page353Tuesday, June 21 2005 9:38 AM Form No.8U61-EA-05G

Black plate (354,1) Specifications q Engine Item Classification Type DOHC-24V 60°V, 6-cylinder Bore × Stroke 89.0 × 79.5 mm (3.50 × 3.13 in) Displacement 2,967 ml (2,967 cc, 181.0 cu in) Compression ratio 10.0 q Electrical System Item Classification Battery 12V-48AH/5HR MF 12V-55AH/5HR MF Alternator...

Black plate (356,1) q Light Bulbs Exterior light Light bulb Category Wattage ECE R SAE Headlights 60/55 HB2 ― Front turn signal lights/Front side-marker lights 21/5 ― #1157NA Fog lights í 55 H11 ― Parking lights 5 W5W #168 Side turn signal lights *1 5 WY5W ― Rear turn signal lights 21 WY21W ― Brake ...

Black plate (357,1) Standard tire Item Model Tire size 205/65R15 94H 215/60R16 95H P215/60R17 95H Rim size 15×6JJ *1 , 15×6J *2 16×6-1/2J 17×7J Inflation pressure 240 kPa (35 psi or lb/po 2 ) 240 kPa (35 psi or lb/po 2 ) 240 kPa (35 psi or lb/po 2 ) *1 Steel wheel*2 Alloy wheel Temporary spare tire ...

Black plate (359,1) 11 Index 11-1 Mazda MPV_8U61-EA-05G_Edition1 Page359Tuesday, June 21 2005 9:38 AM Form No.8U61-EA-05G