Makita UH4570 - Manuals

7 Arm cord hook (Accessory) CAUTION: • Do not attach the holder of arm cord hook to other than the extension cord. Do not attach it in a position closer to the tool beyond the hook complete hooks. Failure to do so may cause an accident or personal injury. • Attach firmly one hook of the hook complet...

8 009286 Attaching the chip receiver (accessory) on the tool when trimming the hedge straight can avoid cut off leaves' being thrown away. 009287 To cut a hedge side evenly, it helps to cut from the bottom upwards. 009288 Trim boxwood or rhododendron from the base toward the top for a nice appearanc...

9 12 009293 CAUTION: • The blade cover (standard equipment) cannot be installed on the tool with the chip receiver being installed. Before carrying or storing, uninstall the chip receiver and then install the blade cover to avoid blade exposure. NOTE: • Check the chip receiver for secure installment...

10 1 009298 Remove two screws from the shear blades and the shear blade unit will be taken out. 1 2 009299 CAUTION: • Return the gear to the original position in such a manner as it was installed if it should be taken away by mistake. Installing the shear blade Prepare 4 removed screws (For under co...

11 Storage The hook hole in the bottom of the blade cover is convenient for hanging the tool from a nail or screw on the wall. 009305 Put the blade cover on the shear blades so that the blades are not exposed. Store the tool out of the reach of children carefully. Store the tool in the place not exp...