Makita Sander - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA001-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 5 - SPECIFIC SAFETY RULES; GROUNDING METHODS

5 An adapter Fig. “B” and “C” is available for connecting Fig. “A” type plugs to two-prongreceptacles. The green-colored rigid ear, lug, etc., extending from the adapter must be con-nected to a permanent ground, such as a properly grounded outlet box. SPECIFIC SAFETY RULES USB038-5 DO NOT let comfor...

Page 8 - ASSEMBLY

8 ASSEMBLY CAUTION: • Always be sure that the tool is switched off andunplugged before carrying out any work on the tool. Installing side grip (handle) CAUTION: • Always be sure that the side grip is installed securelybefore operation. Screw the side grip securely on the position of the tool asshown...

Page 9 - Installing or removing wheel guard

9 • Guard assemblyPart No. 191214-3 ... For 180 mm (7”)Part No. 191215-1 ... For 230 mm (9”)Guard accessory kitPart No. 191228-2 ... For 180 mm (7”)Part No. 191231-3 ... For 230 mm (9”) Installing or removing wheel guard CAUTION: • When using a depressed center grinding wheel/Multi-disc, flex wheel ...

Page 10 - OPERATION; Grinding and sanding operation

10 Installing or removing flex wheel(optional accessory) WARNING: • Always use specific guard when depressed centergrinding wheel/Multi-disc is on tool. Wheel can shatterduring use and guard helps to reduce chances ofpersonal injury. Follow instructions for depressed center grinding wheel/Multi-disc...

Page 12 - MAINTENANCE; Replacing carbon brushes; ACCESSORIES

12 MAINTENANCE CAUTION: • Always be sure that the tool is switched off andunplugged before attempting to perform inspection ormaintenance. The tool and its air vents have to be kept clean. Regularlyclean the tool’s air vents or whenever the vents start tobecome obstructed. Replacing carbon brushes R...

Page 14 - Memo

Page 18 - MAIL THIS PORTION; Your answer to the following questions are appreciated.; Please return this portion by facsimile or mail.

18 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn of about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of t...

Page 19 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

19 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA 2365 Pelham ParkwayPelham, AL 35124(205) 620-1791 ARIZONA 3707 E. Broadway Rd., Ste. 6Phoenix, AZ 85040(602) 437-2850 ARKANSAS Shackleford Shopping Center240 South Shackleford Rd.,Ste. CLittle Rock, AR 72211(501) ...

Page 20 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints,• crystalline silic...

Makita Sander - Manuals

Manuals:

Manual Makita Sander

Summary

Makita Manuals