Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area; Electrical Safety
2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA001-3 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...
Page 5 - SPECIFIC SAFETY RULES
5 SPECIFIC SAFETY RULES USB083-2 DO NOT let comfort or familiarity with product (gained fromrepeated use) replace strict adherence to stone polisher safetyrules. If you use this tool unsafely or incorrectly, you can sufferserious personal injury. 1. Accessories must be rated for at least thespeed re...
Page 8 - Constant speed control
8 Speed adjusting dial The rotating speed can be changed by turning the speedadjusting dial to a given number setting from 1 to 5.Higher speed is obtained when the dial is turned in the direc-tion of number 5. And lower speed is obtained when it isturned in the direction of number 1.Refer to the bel...
Page 9 - Opening or closing of water lever; ASSEMBLY
9 Opening or closing of water lever To keep the lever on the tool for water flow open, turn it to theposition A where the water passage will be ready. Return it tothe position B to close. ASSEMBLY CAUTION: • Always be sure that the tool is switched off andunplugged before carrying out any work on th...
Page 10 - Installing or removing the front grip
10 Installing or removing the front grip CAUTION: • Make sure that the front grip is installed securely beforeoperation. • The front grip and the side grip cannot be installed at thesame time. Remove two screws and then the head cover.(The front gripcannot be installed during the installation of hea...
Page 11 - Hose connector assembly; OPERATION; Polishing operation
11 Hose connector assembly Use the hose connector assembly to connect to watersource. It consists of the following parts. C00099 Assemble the above parts hand tight as follows. 1. Attach the hose connector to the outlet of water cock. 2. Tighten the connector firmly to the hose. Insert the con- nect...
Page 12 - MAINTENANCE; Replacing dust cover brush
12 MAINTENANCE CAUTION: • Always be sure that the tool is switched off andunplugged before attempting to perform inspection ormaintenance. The tool and its air vents have to be kept clean. Regularlyclean the tool’s air vents or whenever the vents start tobecome obstructed. Replacing dust cover brush...
Page 13 - ACCESSORIES
13 ACCESSORIES CAUTION: • These accessories or attachments are recommended foruse with your Makita tool specified in this manual. Theuse of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose. If you need any assistanc...
Page 14 - Memo
Page 18 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.
18 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...
Page 19 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS
19 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy Street Fremont, CA 94538-5107 (510) 657-9881 14930 Northam Street La Mirada, CA 90638-5753 (714) 522-8088 4191A Power Inn Rd. ...
Page 20 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation
WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...