Makita NHP1030 - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area; Electrical Safety

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SERVICE; SPECIFIC SAFETY RULES

4 22. Use only accessories that are recom- mended by the manufacturer for yourmodel. Accessories that may be suitable for one tool, may become hazardous when usedon another tool. SERVICE 23. Tool service must be performed only by qualified repair personnel. Service or main- tenance performed by unqu...

Page 7 - Selecting the action mode; ASSEMBLY; Installing or removing drill bit

7 Selecting the action mode This tool has an action mode changing knob.For rotation with hammering, turn the knob so that the mark is towards the small diamond marking on the tool body.For rotation only, turn the knob so that the mark is towards the small diamond marking. CAUTION: • Always turn the ...

Page 8 - Depth gauge; OPERATION; Hammer drilling operation

8 Depth gauge The depth gauge is convenient for drilling holes of uniformdepth. Loosen the clamp screw and adjust the depth gaugeto the desired depth. After adjusting, tighten the clamp screw. OPERATION Hammer drilling operation CAUTION: • There is a tremendous and sudden twisting forceexerted on th...

Page 9 - Drilling operation; Drilling in wood

9 Blow-out bulb (optional accessory) After drilling the hole, use the blow-out bulb to clean the dustout of the hole. Drilling operation CAUTION: • Pressing excessively on the tool will not speed up thedrilling. In fact, this excessive pressure will only serve todamage the tip of your bit, decrease ...

Page 11 - Memo

Page 14 - Your answers to the following questions are appreciated.; Certificate of Warranty

14 Your answers to the following questions are appreciated. Date Purchased Model No. Serial No. Initial Last Name Street Address City Province AGE: Male Female Married Single Month Day Year 20 Under 19 20-29 30-39 40-49 Over 50 Paste Paste Paste Paste Paste Paste Paste Paste P aste P aste P aste P a...

Page 15 - Factory Service Centres; CUSTOMER RECORD

15 Factory Service Centres For the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our customer service department (Tel) 1-800-263-3734 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Pac...

Page 16 - Warranty Policy; MAKITA LIMITED ONE YEAR WARRANTY; Makita Corporation

Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop duringthis one year period, return the COMPLE...

Makita NHP1030 - Manuals

Manuals:

Manual Makita NHP1030

Summary

Makita Manuals