Makita MODEL HP1501 - Manuals

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SPECIFIC SAFETY RULES

4 22. Use only accessories that are recom- mended by the manufacturer for yourmodel. Accessories that may be suitable for one tool, may become hazardous when usedon another tool. SERVICE 23. Tool service must be performed only by qualified repair personnel. Service or main- tenance performed by unqu...

Page 7 - Selecting the action mode; ASSEMBLY; Installing or removing drill bit

7 Selecting the action mode This tool has an action mode changing button.For rotation with hammering, depress the button from theside with symbol fully. For rotation only, depress the button from the side withsymbol fully. CAUTION: • Always depress the action mode changing button all theway to your ...

Page 8 - Depth gauge; OPERATION; Hammer drilling operation

8 For Model HP1500 To install the bit, place it in the chuck as far as it will go.Tighten the chuck by hand. Place the chuck key in each ofthe three holes and tighten clockwise. Be sure to tighten allthree chuck holes evenly.To remove the bit, turn the chuck key counterclockwise in justone hole, the...

Page 9 - Drilling operation

9 ping away from the hole.Do not apply more pressure when the hole becomes cloggedwith chips or particles. Instead, run the tool at an idle, thenremove the bit partially from the hole. By repeating this sev-eral times, the hole will be cleaned out and normal drillingmay be resumed. Blow-out bulb (op...

Page 10 - MAINTENANCE

10 Drilling in metal To prevent the bit from slipping when starting a hole, makean indentation with a center-punch and hammer at the pointto be drilled. Place the point of the bit in the indentation andstart drilling.Use a cutting lubricant when drilling metals. The exceptionsare iron and brass whic...

Page 11 - Memo

Page 14 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

14 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 15 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

15 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy St. Fremont, CA 94538-5107 (510) 657-9881 14930 Northam St. La Mirada, CA 90638-5753 (714) 522-8088 1970 Fulton Avenue Sacrame...

Page 16 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; MAKITA MANUFACTURING EUROPE LTD

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...

Makita MODEL HP1501 - Manuals

Manuals:

Manual Makita MODEL HP1501

Summary

Makita Manuals