Makita HR2400 - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area; Electrical Safety

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SERVICE; SPECIFIC SAFETY RULES

4 model. Accessories that may be suitable for one tool, may become hazardous when usedon another tool. SERVICE 23. Tool service must be performed only by qualified repair personnel. Service or main- tenance performed by unqualified personnelcould result in a risk of injury. 24. When servicing a tool...

Page 7 - Selecting the action mode; Torque limiter; ASSEMBLY

7 Selecting the action mode This tool employs an action mode changing knob. Select oneof the three modes suitable for your work needs by using thisknob. For rotation only, turn the knob so that the arrow on the knobpoints toward the mark on the tool body. For hammering only, turn the knob so that th...

Page 8 - Installing or removing the bit

8 Side grip (auxiliary handle) The side grip swings around to either side, allowing easyhandling of the tool in any position. Loosen the clamp screwon the side grip and swing the side grip to the desired posi-tion. Then tighten the clamp screw to secure the side grip. Bit grease (optional accessory)...

Page 9 - Using cold chisel or bull point; Depth gauge

9 To remove the bit, pull the chuck cover down all the way andpull the bit out. Using cold chisel or bull point When using optional cold chisel or bull point, proceed as fol-lows. 1. Unplug the tool. 2. Remove the side grip from the tool. 3. Set the action mode changing knob to “rotation with hammer...

Page 10 - OPERATION; Hammer drilling operation

10 Dust cup (optional accessory) Use the dust cup to prevent dust from falling over the tooland on yourself when performing overhead drilling opera-tions. Attach the dust cup to the bit as shown in the figure.The size of bits which the dust cup can be attached to is asfollows. OPERATION Hammer drill...

Page 11 - Drilling in wood or metal; MAINTENANCE

11 Chipping/Scaling/Demolition Set the action mode changing knob to the symbol. Hold the tool firmly with both hands. Turn the tool on andapply slight pressure on the tool so that the tool will notbounce around, uncontrolled. Pressing very hard on the toolwill not increase the efficiency. Drilling i...

Page 12 - ACCESSORIES

12 To maintain product SAFETY and RELIABILITY, repairs, car-bon brush inspection and replacement, any other mainte-nance or adjustment should be performed by MakitaAuthorized or Factory Service Centers, always using Makitareplacement parts. ACCESSORIES CAUTION: • These accessories or attachments are...

Page 14 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

14 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 15 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

15 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA 2365 Pelham ParkwayPelham, AL 35124(205) 620-1791 ARIZONA 3707 E. Broadway Rd., Ste. 6Phoenix, AZ 85040(602) 437-2850 ARKANSAS Shackleford Shopping Center240 South Shackleford Rd.,Ste. CLittle Rock, AR 72211(501) ...

Page 16 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints,• crystalline silic...

Makita HR2400 - Manuals

Manuals:

Manual Makita HR2400

Summary

Makita Manuals