Makita HP1621 - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area; Electrical Safety

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SERVICE; SPECIFIC SAFETY RULES

4 22. Use only accessories that are recom-mended by the manufacturer for yourmodel. Accessories that may be suitable for one tool, may become hazardous when usedon another tool. SERVICE 23. Tool service must be performed only byqualified repair personnel. Service or main- tenance performed by unqual...

Page 7 - Reversing switch action; Selecting the action mode; ASSEMBLY

7 Reversing switch action This tool has a reversing switch to change the direction ofrotation. Move the reversing switch to the position (A side) for clockwise rotation or the position (B side) for counterclockwise rotation. CAUTION: • Always check the direction of rotation before operation. • Use t...

Page 8 - Installing or removing drill bit

8 Installing or removing drill bit For Model HP1620, HP1620F To install the bit, place it in the chuck as far as it will go.Tighten the chuck by hand. Place the chuck key in each ofthe three holes and tighten clockwise. Be sure to tighten allthree chuck holes evenly.To remove the bit, turn the chuck...

Page 9 - Depth gauge; OPERATION; Hammer drilling operation

9 Depth gauge The depth gauge is convenient for drilling holes of uniformdepth. Loosen the side grip and insert the depth gauge intothe hole in the side grip. Adjust the depth gauge to thedesired depth and tighten the side grip. NOTE: • The depth gauge cannot be used at the position wherethe depth g...

Page 10 - Drilling operation; Drilling in wood

10 Blow-out bulb (optional accessory) After drilling the hole, use the blow-out bulb to clean the dustout of the hole. Drilling operation When drilling in wood, metal or plastic materials, move theaction mode changing lever to the position of symbol to use “rotation only” action. Drilling in wood Wh...

Page 12 - Memo

Page 14 - Your answers to the following questions are appreciated.; Certificate of Warranty

14 Your answers to the following questions are appreciated. Date Purchased Model No. Serial No. Initial Last Name Street Address City Province AGE: Male Female Married Single Month Day Year 20 Under 19 20-29 30-39 40-49 Over 50 Paste Paste Paste Paste Paste Paste Paste Paste P aste P aste P aste P a...

Page 15 - Factory Service Centres; CUSTOMER RECORD

15 Factory Service Centres For the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our customer service department (Tel) 1-800-263-3734 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Pac...

Page 16 - Warranty Policy; MAKITA LIMITED ONE YEAR WARRANTY; Makita Manufacturing Europe Ltd; Hortonwood 7 Telford, Shropshire, TF1 7YX

Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop duringthis one year period, return the COMPLE...

Makita HP1621 - Manuals

Manuals:

Manual Makita HP1621

Summary

Makita Manuals