Makita HM1800 - Manuals

5 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged beforeadjusting or checking function on the tool. Switch action CAUTION: • Before plugging in the tool, always check to see that the switch leveractuates properly and returns to the “OFF” position when rel...

6 (2) For bits without a collar Pivot the tool retainer front and slightly downward. With the notched por-tion of the bit facing the tool retainer shaft, insert the bit into the toolholder as far as it will go. Then pivot the tool retainer further downwardtoward the cylinder to securely retain the b...

7 Use a hex wrench to remove the motor housing cover. Use a screwdriver to remove the brush holder caps. Take out the worn carbonbrushes, insert the new ones and secure the brush holder caps. Lubrication This tool requires no hourly or daily lubrication because it has a grease-packed lubrication sys...

8 ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. Theuse of any other accessories or attachments might present a risk of injury to persons. Only use accessory orattachment for its stated purpose. If you need any assistan...