Makita GV7000C - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SPECIFIC SAFETY RULES

4 SERVICE 23. Tool service must be performed only by qualified repair personnel. Service or main- tenance performed by unqualified personnelcould result in a risk of injury. 24. When servicing a tool, use only identical replacement parts. Follow instructions inthe Maintenance section of this manual....

Page 7 - ASSEMBLY

7 The tool equipped with electronic function are easy to oper-ate because of the following features. • Electronic constant speed controlPossible to get fine finish, because the rotating speed iskept constantly even under the loaded condition. • Soft start featureSoft start because of suppressed star...

Page 8 - Installing or removing abrasive disc; OPERATION; Sanding operation; MAINTENANCE

8 Installing or removing abrasive disc Mount the rubber pad onto the spindle. Fit the abrasive discon the rubber pad and screw the lock nut onto the spindle. To tighten the lock nut, hold the spindle with the wrench sothat it cannot revolve, then use the lock nut wrench andsecurely tighten clockwise...

Page 9 - Replacing carbon brushes; ACCESSORIES

9 Replacing carbon brushes Remove and check the carbon brushes regularly. Replacewhen they wear down to the limit mark. Keep the carbonbrushes clean and free to slip in the holders. Both carbonbrushes should be replaced at the same time. Use only iden-tical carbon brushes. Use a screwdriver to remov...

Page 10 - Memo

Page 14 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

14 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 15 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

15 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy St. Fremont, CA 94538-5107 (510) 657-9881 14930 Northam St. La Mirada, CA 90638-5753 (714) 522-8088 1970 Fulton Avenue Sacrame...

Page 16 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...

Makita GV7000C - Manuals

Manuals:

Manual Makita GV7000C

Summary

Makita Manuals