Makita DP3003 - Manuals

Describes how to remove a stuck bit by reversing rotation, use of the hook for storage, maintenance cautions, noise and vibration levels (80 dB, 2.5 m/s²), and EC declaration of conformity.

German version of the general view diagram with numbered parts, technical data for six models, and 13 safety instructions (Sicherheitshinweise).

Continues German safety points (14-22) and additional safety rules (1-6). Provides operating instructions for mounting and dismounting tool inserts for both chuck types.

Instructions for using the switch, reversing switch, side handle, depth stop; drilling in wood and metal; proper tool holding; using the hook; maintenance; noise/vibration data; and CE declaration.

Polish version of the general view, technical specifications for six models, and 13 safety instructions (Instrukcje bezpieczeństwa).

Continues Polish safety points (14-22) and additional safety rules (1-6). Instructions for installing/removing drill bits for both chuck types.

Instructions for switch action, reversing switch, side handle, depth gauge; drilling in wood and metal; tool holding; hook usage; maintenance; noise/vibration levels; and EU declaration.

Russian version of general view, technical specifications for six models, and 11 safety instructions (Инструкции по мерам безопасности).

Continues Russian safety points (12-22) and additional safety rules (1-6). Instructions for installing drill bit for models DP3002/DP4000/DP4002.

Instructions for switch action, reversing switch, side grip, depth gauge; drilling in wood and metal; tool holding; and hook usage.

Russian instructions for maintenance, noise and vibration levels, and EC declaration of conformity.

6 SYMBOLS USD201-2 The followings show the symbols used for tool. V ....................... volts A ....................... amperes Hz ..................... hertz ................ alternating current .................... no load speed .................... Class II Construction .../min .................

8 Hook When using the hook, pull it out in A direction and then pushit in B direction to secure in place.When not using the hook, return it back to its initial positionby following the above procedures in reverse. ASSEMBLY CAUTION: • Always be sure that the tool is switched off andunplugged before c...

9 Installing or removing drill bit For Model DP3003, DP4001, DP4003 Hold the ring and turn the sleeve counterclockwise to openthe chuck jaws. Place the bit in the chuck as far as it will go.Hold the ring firmly and turn the sleeve clockwise to tightenthe chuck.To remove the bit, hold the ring and tu...

10 OPERATION Holding tool When drilling a large hole with a hole saw, etc., the side grip(auxiliary handle) should be used as a brace to maintain safecontrol of the tool. Grasp the rear handle and the front grip firmly when startingor stopping the tool, since there is an initial and final reaction. ...

14 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

15 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA 2365 Pelham ParkwayPelham, AL 35124 (205) 620-1791 ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 ARKANSAS Shackleford Shopping Center 240 South Shackleford Rd., Ste. C Little Rock, AR 72211...

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...