Makita DA302D - Manuals

8 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and thebattery cartridge is removed before adjusting orchecking function on the tool. Installing or removing battery cartridge For DA302D • Always switch off the tool before insertion or removal ofthe battery cartridge....

9 Charging For DC9710 1. Plug the battery charger into the proper AC voltage source. 2. Insert the battery cartridge so that the plus and minus terminals on the battery cartridge are on the same sidesas their respective markings on the charger. Insert thecartridge fully into the port so that it rest...

11 Trickle charge (Maintenance charge) If you leave the battery cartridge in the charger to preventspontaneous discharging after full charge, the charger willswitch into its “trickle charge (maintenance charge)” modeand keep the battery cartridge fresh and fully charged. Tips for maintaining maximum...

12 Reversing switch action This tool has a reversing switch to change the direction ofrotation. Move the reversing switch lever to the A side forclockwise rotation or the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, theswitch trigger cannot be pul...

13 Installing set plate (optional accessory) Always install the set plate when using battery cartridges9100, 9102, 9101A for DA392D and 1200, 1202, 1201A forDA312D. Install the set plate on the tool with the screw pro-vided. OPERATION Screwdriving operation Place the point of the driver bit in the s...

14 Drilling in metal To prevent the bit from slipping when starting a hole, makean indentation with a center-punch and hammer at the pointto be drilled. Place the point of the bit in the indentation andstart drilling.Use a cutting lubricant when drilling metals. The exceptionsare iron and brass whic...

15 EN0001-1 Recycling the Battery The only way to dispose of a Makita battery is to recycle it.The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. 2. a) Take the battery to your nearest Makita Factory Ser-vice Center or b) Take the battery to ...

18 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

19 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA 2365 Pelham ParkwayPelham, AL 35124 (205) 620-1791 ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 ARKANSAS Shackleford Shopping Center 240 South Shackleford Rd., Ste. C Little Rock, AR 72211...

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...