Makita BTD134 - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; Symbols; Intended use; Wear ear protection

2 ENGLISH (Original instructions) SPECIFICATIONS Model BTD134 BTD146 Machine screw 4 mm - 8 mm Standard bolt 5 mm - 14 mm Capacities High tensile bolt 5 mm - 12 mm No load speed (min -1 ) 0 - 2,400 0 - 2,300 Impacts per minute 0 - 3,200 Overall length 138 mm Net weight 1.2 kg (with battery BL1415) 1...

Page 3 - EC Declaration of Conformity

3 • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time)...

Page 4 - SAVE THESE INSTRUCTIONS.

4 13. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 14. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpect...

Page 5 - Tips for maintaining maximum battery life; FUNCTIONAL DESCRIPTION; Installing or removing battery cartridge

5 ENC007-7 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively sho...

Page 6 - Switch action

6 The tool stops during operation when the tool and/or battery are placed under the following situation. This is caused by the activation of protection system and does not show the tool trouble. • When the tool is overloaded: At this time, release the switch trigger, remove the battery cartridge and...

Page 7 - ASSEMBLY; Installing or removing driver bit or socket bit; For tool with shallow bit hole

7 LED indicator status Remaining battery capacity About 50% or more About 20% - 50% About less than 20% 012023 NOTE: • Before checking the remaining battery capacity, be sure to stop the tool. ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed befor...

Page 8 - Hook; OPERATION

8 Hook 1 2 012014 The hook is convenient for temporarily hanging the tool. This can be installed on either side of the tool. To install the hook, insert it into a groove in the tool housing on either side and then secure it with a screw. To remove, loosen the screw and then take it out. OPERATION 01...

Page 9 - MAINTENANCE; Replacing carbon brushes

9 bolt and the bolt length. 4. The manner of holding the tool or the material of driving position to be fastened will affect the torque. 5. Operating the tool at low speed will cause a reduction in the fastening torque. MAINTENANCE CAUTION: • Always be sure that the tool is switched off and the batt...

Page 10 - OPTIONAL ACCESSORIES

10 OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need ...

Page 12 - Makita Corporation

12 Makita Corporation Anjo, Aichi, Japan www.makita.com 885044-225

Makita BTD134 - Manuals

Manuals:

Manual Makita BTD134

Summary

Makita Manuals