Makita BKP180 - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; Symbols; Read instruction manual.; Intended use; The tool is intended for planing wood.; Noise; Sound pressure level (L; Wear ear protection

2 ENGLISH (Original instructions) SPECIFICATIONS Model BKP140 BKP180 Planing width 82 mm Planing depth 1.6 mm 2 mm Shiplapping depth 9 mm No load speed (min -1 ) 13,000 14,000 Overall length 329 mm 333 mm Net weight 3.3 kg 3.4 kg Rated voltage D.C. 14.4 V D.C. 18 V • Due to our continuing programme ...

Page 3 - EC Declaration of Conformity

3 ENH101-15 For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Cordless Planer Model No./ Type: BKP140, BKP180 are of series production and Conforms to the following Euro...

Page 5 - cause vibration and shorten tool life.; Do not disassemble battery cartridge.; SAVE THESE INSTRUCTIONS.; Tips for maintaining maximum battery life

5 cause vibration and shorten tool life. 16. Use only Makita blades specified in this manual. 17. Always use the correct dust mask/respirator for the material and application you are working with. SAVE THESE INSTRUCTIONS. WARNING: DO NOT let comfort or familiarity with product (gained from repeated ...

Page 6 - FUNCTIONAL DESCRIPTION; Installing or removing battery cartridge; When the tool is overloaded:; Adjusting depth of cut

6 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 3 011755 • Always switch off the tool before installing or removing of the battery car...

Page 7 - Foot; ASSEMBLY; Removing or installing planer blades; For tool with conventional planer blades; gauge plate

7 WARNING: • For your safety, this tool is equipped with lock-off lever which prevents the tool from unintended starting. NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off lever. Return tool a MAKITA service center for proper repairs BEFORE further u...

Page 8 - For tool with mini planer blades; For the correct planer blade setting

8 For tool with mini planer blades 1 2 4 3 011740 1. Remove the existing blade, if the tool has been in use, carefully clean the drum surfaces and the drum cover. To remove the blades on the drum, unscrew the three installation bolts with the socket wrench. The drum cover comes off together with the...

Page 9 - Cause: One or both blades fails to

9 (A) (B) (B) (A) (B) (A) (A) Front base (Movable shoe)(B) Rear base (Stationary shoe) Correct setting Nicks in surface Gouging at start Gouging at end Although this side view cannot show it, the edges of the blades run perfectly parallel to the rear base surface. Cause: One or both blades fails to ...

Page 10 - Connecting a vacuum cleaner; For tool without nozzle; OPERATION; Planing operation

10 Connecting a vacuum cleaner 011757 For tool without nozzle When you wish to perform clean planing operation, connect a Makita vacuum cleaner to your tool. Before connecting the vacuum cleaner, remove the chip cover from the tool. Then connect a hose of the vacuum cleaner to the nozzle (optional a...

Page 11 - Chamfering; MAINTENANCE; Sharpening the planer blades; For conventional blades only; holder

11 Draw a cutting line on the workpiece. Insert the edge fence into the hole in the front of the tool. Align the blade edge with the cutting line. 1 2 011760 Adjust the edge fence until it comes in contact with the side of the workpiece, then secure it by tightening the screw. 011761 When planing, m...

Page 12 - Replacing carbon brushes; OPTIONAL ACCESSORIES

12 002590 Immerse the dressing stone in water for 2 or 3 minutes before sharpening. Hold the holder so that the both blades contact the dressing stone for simultaneous sharpening at the same angle. Replacing carbon brushes 1 001145 Remove and check the carbon brushes regularly. Replace when they wea...

Page 16 - Makita Corporation

16 Makita Corporation Anjo, Aichi, Japan www.makita.com 885009A227

Makita BKP180 - Manuals

Manuals:

Manual Makita BKP180

Summary

Makita Manuals